Standards in PARTsolutions
The Strategic Parts Management PARTsolutions by CADENAS offers engineers access to engineering data from all the most used standard components.
An overview of the available standards can be found here:
AIANASANANSIASASMEASNABSICSNDASTDINDIN_EN_ISOENGBGOSTISISOJB-TJISKSLNMSMS_LIBRARYNASNASMNFNF_EN_ISONIHSNSAPNSAESISUICUNECEUNIUNI_EN_ISOVG
Included
| IS 6392 | Steel pipe flanges, integral flanges, nominal pressure 10 N/mm² |
| IS 6392 | Steel pipe flanges, integral flanges, nominal pressure 16 N/mm² |
| IS 6392 | Steel pipe flanges, integral flanges, nominal pressure 1.6 N/mm² |
| IS 6392 | Steel pipe flanges, integral flanges, nominal pressure 2.5 N/mm² |
| IS 6392 | Steel pipe flanges, Integral flanges, Nominal pressure 4.0 N/mm2 |
| IS 6392 | Steel pipe flanges, integral flanges, nominal pressure 6.4 N/mm² |
| IS 6392 | Steel pipe flanges, loose flanges for welded on lapped pipe ends, nominal pressure 0.60 N/mm² |
| IS 6392 | Steel pipe flanges, loose flanges for welded on lapped pipe ends, nominal pressure 1 N/mm² |
| IS 6392 | Steel pipe flanges, plate blank flanges, nominal pressure 0.60 N/mm² |
| IS 6392 | Steel pipe flanges, plate blank flanges, nominal pressure 1 N/mm² |
| IS 6392 | Steel pipe flanges, plate blank flanges, nominal pressure 1.6 N/mm² |
| IS 6392 | Steel pipe flanges, plate blank flanges, nominal pressure 2.5 N/mm² |
| IS 6392 | Steel pipe flanges, plate blank flanges, nominal pressure 4.0 N/mm² |
| IS 6392 | Steel pipe flanges, plate flanges for welding, nominal pressure 0.25 N/mm² |
| IS 6392 | Steel pipe flanges, plate flanges for welding, nominal pressure 0.60 N/mm² |
| IS 6392 | Steel pipe flanges, plate flanges for welding, nominal pressure 1 N/mm² |
| IS 6392 | Steel pipe flanges, plate flanges for welding, nominal pressure 10 N/mm² |
| IS 6392 | Steel pipe flanges, plate flanges for welding, nominal pressure 16 N/mm² |
| IS 6392 | Steel pipe flanges, plate flanges for welding, nominal pressure 1.6 N/mm² |
| IS 6392 | Steel pipe flanges, plate flanges for welding, nominal pressure 2.5 N/mm² |
| IS 6392 | Steel pipe flanges, plate flanges for welding, nominal pressure 4.0 N/mm² |
| IS 6392 | Steel pipe flanges, plate flanges for welding, nominal pressure 6.4 N/mm² |
| IS 6392 | Steel pipe flanges, screwed boss flanges, nominal pressure 0.60 N/mm² |
| IS 6392 | Steel pipe flanges, screwed boss flanges, nominal pressure 10 N/mm² |
| IS 6392 | Steel pipe flanges, screwed boss flanges, nominal pressure 1 and 1.6 N/mm² |
| IS 6392 | Steel pipe flanges, screwed boss flanges, nominal pressure 2.5 and 4.0 N/mm² |
| IS 6392 | Steel pipe flanges, screwed boss flanges, nominal pressure 6.4 N/mm² |
| IS 6392 | Steel pipe flanges, slip-on boss flange for welding, nominal pressure 0.60 N/mm² |
| IS 6392 | Steel pipe flanges, slip-on boss flange for welding, nominal pressure 1 N/mm² |
| IS 6392 | Steel pipe flanges, slip-on boss flange for welding, nominal pressure 1.6 N/mm² |
| IS 6392 | Steel pipe flanges, slip-on boss flange for welding, nominal pressure 2.5 N/mm² |
| IS 6392 | Steel pipe flanges, slip-on boss flange for welding, nominal pressure 4.0 N/mm² |
| IS 6392 | Steel pipe flanges, welding neck flanges, nominal pressure 0.25 N/mm² |
| IS 6392 | Steel pipe flanges, welding neck flanges, nominal pressure 0.60 N/mm² |
| IS 6392 | Steel pipe flanges, welding neck flanges, nominal pressure 1 N/mm² |
| IS 6392 | Steel pipe flanges, welding neck flanges, nominal pressure 10 N/mm² |
| IS 6392 | Steel pipe flanges, welding neck flanges, nominal pressure 16 N/mm² |
| IS 6392 | Steel pipe flanges, welding neck flanges, nominal pressure 1.6 N/mm² |
| IS 6392 | Steel pipe flanges, welding neck flanges, nominal pressure 2.5 N/mm² |
| IS 6392 | Steel pipe flanges, welding neck flanges, nominal pressure 4.0 N/mm² |
| IS 6392 | Steel pipe flanges, welding neck flanges, nominal pressure 6.4 N/mm² |
| IS 4866 | Welded shell flanges for carbon steel pressure vessels and equipment |
| IS 4867 | Welded neck shell flanges for carbon steel pressure vessels and equipment |
| IS 4868 | Welded shell flanges for stainless steel pressure vessels and equipment |
| IS 4869 | Welded shell flanges with hub for stainless steel presure vessels and equipment |
| IS 1978 | Plain-end line pipes |
| IS 1978 | Standard-weight threaded line pipes |
| IS 3589 | Steel pipes for water and sewage |
| IS 280 | Mild steel wire for general engineering purposes |
| IS 2315 O | Thimbles, Type O |
| IS 2315 R | Thimbles, Type R |
| IS 2315 S | Thimbles, Type S |
| IS 2315 OT | Thimbles, Type OT |
| IS 2266 CF 6x7 | Round 6x7 Steel wire ropes with Fibre core (CF) |
| IS 2266 CWR 6x7 | Round 6x7 Steel wire ropes with Steel core (CWR) |
| IS 2266 CF 6x19M | Round 6x19M Steel wire ropes with Fibre core (CF) |
| IS 2266 CWR 6x19M | Round 6x19M Steel wire ropes with Steel core (CWR) |
| IS 2266 CF 6x37M | Round 6x37M Steel wire ropes with Fibre core (CF) |
| IS 2266 CWR 6x37M | Round 6x37M Steel wire ropes with Steel core (CWR) |
| IS 2266 CF 6x17S | Round 6x17S Steel wire ropes with Fibre core (CF) |
| IS 2266 CWR 6x17S | Round 6x17S Steel wire ropes with Steel core (CWR) |
| IS 2266 CF 6x19S | Round 6x19S Steel wire ropes with Fibre core (CF) |
| IS 2266 CWR 6x19S | Round 6x19S Steel wire ropes with Steel core (CWR) |
| IS 2266 CF 6x21F | Round 6x21F Steel wire ropes with Fibre core (CF) |
| IS 2266 CWR 6x21F | Round 6x21F Steel wire ropes with Steel core (CWR) |
| IS 2266 CF 6x26SW | Round 6x26SW Steel wire ropes with Fibre core (CF) |
| IS 2266 CWR 6x26SW | Round 6x26SW Steel wire ropes with Steel core (CWR) |
| IS 2266 CF 6x31SW | Round 6x31SW Steel wire ropes with Fibre core (CF) |
| IS 2266 CWR 6x31SW | Round 6x31SW Steel wire ropes with Steel core (CWR) |
| IS 2266 CF 6x36SW | Round 6x36SW Steel wire ropes with Fibre core (CF) |
| IS 2266 CWR 6x36SW | Round 6x36SW Steel wire ropes with Steel core (CWR) |
| IS 2266 CF 6x41SW | Round 6x41SW Steel wire ropes with Fibre core (CF) |
| IS 2266 CWR 6x41SW | Round 6x41SW Steel wire ropes with Steel core (CWR) |
| IS 2266 CF 6x49SWS | Round 6x49SWS Steel wire ropes with Fibre core (CF) |
| IS 2266 CWR 6x49SWS | Round 6x49SWS Steel wire ropes with Steel core (CWR) |
| IS 2266 CF 6x55SWS | Round 6x55SWS Steel wire ropes with Fibre core (CF) |
| IS 2266 CWR 6x55SWS | Round 6x55SWS Steel wire ropes with Steel core (CWR) |
| IS 2266 CF 8x19S | Round 8x19S Steel wire ropes with Fibre core (CF) |
| IS 2266 CWR 8x19S | Round 8x19S Steel wire ropes with Steel core (CWR) |
| IS 2266 CF 8x25F | Round 8x25F Steel wire ropes with Fibre core (CF) |
| IS 2266 CWR 8x25F | Round 8x25F Steel wire ropes with Steel core (CWR) |
| IS 2266 CF 8x36SW | Round 8x36SW Steel wire ropes with Fibre core (CF) |
| IS 2266 CWR 8x36SW | Round 8x36SW Steel wire ropes with Steel core (CWR) |
| IS 2266 CF 8x37SF | Round 8x37SF Steel wire ropes with Fibre core (CF) |
| IS 2266 CWR 8x37SF | Round 8x37SF Steel wire ropes with Steel core (CWR) |
| IS 2266 CF 17x7 | Round 17x7 Steel wire ropes with Fibre core (CF) |
| IS 2266 CWR 17x7 | Round 17x7 Steel wire ropes with Steel core (CWR) |
| IS 2266 CF 18x7 | Round 18x7 Steel wire ropes with Fibre core (CF) |
| IS 2266 CWR 18x7 | Round 18x7 Steel wire ropes with Steel core (CWR) |
| IS 2266 CF 34x7 | Round 34x7 Steel wire ropes with Fibre core (CF) |
| IS 2266 CWR 34x7 | Round 34x7 Steel wire ropes with Steel core (CWR) |
| IS 2266 CF 36x7 | Round 36x7 Steel wire ropes with Fibre core (CF) |
| IS 2266 CWR 36x7 | Round 36x7 Steel wire ropes with Steel core (CWR) |
| IS 2266 12x6:3x24 | Oval 12x6:3x24 (15/9-Fibre) |
| IS 2266 CF 6xV25 | Flattened strand 6xV25 Steel wire ropes with Fibre core (CF) |
| IS 2266 CWR 6xV25 | Flattened strand 6xV25 Steel wire ropes with Steel core (CWR) |
| IS 2365 6x19 (12/6/1) | Steel wire suspension ropes for lifts, elevators and hoists |
| IS 2365 6x19 (9/9/1) | Steel wire suspension ropes for lifts, elevators and hoists |
| IS 2365 6x19 (12/6+6F/1) | Steel wire suspension ropes for lifts, elevators and hoists |
| IS 2365 8x19 (9/9/1) | Steel wire suspension ropes for lifts, elevators and hoists |
| IS 2365 8x19 (12/6+6F/1) | Steel wire suspension ropes for lifts, elevators and hoists |
| IS 2904 A1 | Fixed ball handles, type A form 1 |
| IS 2904 A2 | Fixed ball handles, type A form 2 |
| IS 2904 B1 | Free ball handles, type B form 1 |
| IS 2904 B2 | Free ball handles, type B form 2 |
| IS 2890 K | Taper handles for machine tools |
| IS 2890 L | Taper handles for machine tools |
| IS 2890 M | Taper handles for machine tools |
| IS 2890 N | Taper handles for machine tools |
| IS 2890 P | Taper handles for machine tools |
| IS 2890 R | Taper handles for machine tools |
| IS 3048 | Metal handwheels without handle |
| IS 3048 | Plastic handwheels without handle |
| IS 3048 | Metal handwheels with free ball handle |
| IS 3048 | Plastic handwheels with free ball handle |
| IS 3048 | Metal handwheels with fixed ball handle |
| IS 3048 | Plastic handwheels with fixed ball handle |
| IS 1730 ISSH | Steel sheets, form ISSH |
| IS 3502 | Steel chequered plates |
| IS 513 | Cold reduced low carbon steel sheets and strips |
| IS 1730 ISF | Hot rolled steel flats, form ISF |
| IS 1730 ISPL | Steel plates, form ISPL |
| IS 6911 | Stainless steel plate, sheet and strip |
| IS 2314 ISPS F | Steel sheet piling sections, type Flat |
| IS 2314 ISPS U | Steel sheet piling sections, type U |
| IS 2314 ISPS Z | Steel sheet piling sections, type Z |
| IS 1161 | Steel tubes |
| IS 1730 ISST | Steel strips, form ISST |
| IS 1732 ISRO | Hot rolled round steel bars, form ISRO |
| IS 1732 ISSQ | Hot rolled square steel bars, form ISSQ |
| IS 2687 | Cap nuts, series 1 |
| IS 2687 | Cap nuts, series 2 |
| IS 2687 | Cap nuts, series 3 |
| IS 6623 | High strength structural nuts |
| IS 2232 P | Slotted and castle nuts, precision grade |
| IS 2232 B | Slotted and castle nuts, black grade |
| IS 4178 | Eyenuts with collars, range M42 to M100 |
| IS 4178 | Eyenuts with collars, range M10 to M36 |
| IS 5368 | Thin slotted and castle nuts, black grade (B) |
| IS 5368 | Thin slotted and castle nuts, precision grade (P) |
| IS 11428 A1-S | Short radius elbows 90°, seamless, type A1 |
| IS 11428 A1-W | Short radius elbows 90°, welded, type A1 |
| IS 11428 A2-S | Long radius elbows 90°, seamless, type A2 |
| IS 11428 A2-W | Long radius elbows 90°, welded, type A2 |
| IS 11428 A3-S | Long radius elbows 45°, seamless, type A3 |
| IS 11428 A3-W | Long radius elbows 45°, welded, type A3 |
| IS 11428 B1-S | Eccentric reducers, seamless, type B1 |
| IS 11428 B1-W | Eccentric reducers, welded, type B1 |
| IS 11428 B2-S | Concentric reducers, seamless, type B2 |
| IS 11428 B2-W | Concentric reducers, welded, type B2 |
| IS 11428 C1-S | Short radius returns 180°, seamless, type C1 |
| IS 11428 C1-W | Short radius returns 180°, welded, type C1 |
| IS 11428 C2-S | Long radius returns 180°, seamless, type C2 |
| IS 11428 C2-W | Long radius returns 180°, welded, type C2 |
| IS 11428 D1-S | Caps, seamless, type D1 |
| IS 11428 D1-W | Caps, welded, type D1 |
| IS 11428 E1-S | Equal tees, seamless, type E1 |
| IS 11428 E1-W | Equal tees, welded, type E1 |
| IS 11428 E2-S | Unequal tees, seamless, type E2 |
| IS 11428 E2-W | Unequal tees, welded, type E2 |
| IS 11428 E1-S | Equal crosses, seamless, type E1 |
| IS 11428 E1-W | Equal crosses, welded, type E1 |
| IS 11428 E2-S | Unequal crosses, seamless, type E2 |
| IS 11428 E2-W | Unequal crosses, welded, type E2 |
| IS 1239-1 | Steel tubes, Part 1 |
| IS 1239-2 | Running nipples, Part 2 |
| IS 1239-2 | Close taper nipples, Part 2 |
| IS 1239-2 | Barrel nipples, Part 2 |
| IS 1239-2 | Bushes, Part 2 |
| IS 1239-2 | Hexagon nipples, Part 2 |
| IS 1239-2 | Bends 90°, type 1, Part 2 |
| IS 1239-2 | Bends 90°, type 1A, Part 2 |
| IS 1239-2 | Bends 112,5°, type 2, Part 2 |
| IS 1239-2 | Bends 135°, type 3, Part 2 |
| IS 1239-2 | Bends 157.5°, type 4, Part 2 |
| IS 1239-2 | Return bends, Part 2 |
| IS 1239-2 | Elbows equal, Part 2 |
| IS 1239-2 | Elbows reducing, Part 2 |
| IS 1239-2 | Elbows side outlet equal, Part 2 |
| IS 1239-2 | Elbows, male & female, equal, Part 2 |
| IS 1239-2 | Elbows 135°, equal |
| IS 1239-2 | Elbows male, Part 2 |
| IS 1239-2 | Twins elbow, male, equal, Part 2 |
| IS 1239-2 | Y-pieces, equal, Part 2 |
| IS 1239-2 | Y pieces, male, equal, Part 2 |
| IS 1239-2 | Tees equal, Part 2 |
| IS 1239-2 | Tees, Reducing, Part 2 |
| IS 1239-2 | Tees, Reducing on the run and branch, Part 2 |
| IS 1239-2 | Tees increasing, Part 2 |
| IS 1239-2 | Tees side outlet equal, Part 2 |
| IS 1239-2 | Tees Male, Part 2 |
| IS 1239-2 | Angle tees, male, equal, Part 2 |
| IS 1239-2 | Sweeps tee, male, equal, Part 2 |
| IS 1239-2 | Crosses equal, Part 2 |
| IS 1239-2 | Crosses, reducing, Part 2 |
| IS 1239-2 | Crosses side outlet equal, Part 2 |
| IS 1239-2 | Crosses Male, Part 2 |
| IS 1239-2 | Union bends, Part 2 |
| IS 1239-2 | Pipes union, Part 2 |
| IS 1239-2 | Steel sockets, Part 2 |
| IS 1239-2 | Sockets reducing, Part 2 |
| IS 1239-2 | Sockets union, Part 2 |
| IS 1239-2 | Caps, Part 2 |
| IS 1239-2 | Plugs, Part 2 |
| IS 1239-2 | Taper screw plugs, Part 2 |
| IS 1879 | Elbows, type A1 |
| IS 1879 | Elbows, type A1/45° |
| IS 1879 | Elbows, reducing, type A1 |
| IS 1879 | Male and female elbows, type A4 |
| IS 1879 | Male and female elbows, type A4/45° |
| IS 1879 | Elbows, reducing, type A4 |
| IS 1879 | Tees, type B1 |
| IS 1879 | Tees, reducing or increasing on the branch, type B1 |
| IS 1879 | Tees, reducing on the run, reducing, equal to or increasing on the branch, type B1 |
| IS 1879 | Crosses, type C1 |
| IS 1879 | Crosses, reducing, type C1 |
| IS 1879 | Bends, type D1 |
| IS 1879 | Male and female bends, type D4 |
| IS 1879 | Pitcher tees, type E1 |
| IS 1879 | Pitcher tees, reducing on the branch, reducing on the run and reducing on branch and run, type E1 |
| IS 1879 | Twin elbows, type E2 |
| IS 1879 | Twin elbows, reducing, type E2 |
| IS 1879 | Long weep bends, type G1 |
| IS 1879 | Long sweep bends, type G1/45° |
| IS 1879 | Male and female long sweep bends, type G4 |
| IS 1879 | Male and female long weep bends, type G4/45° |
| IS 1879 | Male long sweep bends, type G8 |
| IS 1879 | Return bends, type Kb1 |
| IS 1879 | Eccentric sockets reducing, type M3 |
| IS 1879 | Sockets, right and left-hand thread, type M2 R-L |
| IS 1879 | Male and female sockets, type M4 |
| IS 1879 | Sockets, reducing, type M2 |
| IS 1879 | Male and female sockets, reducing, type M4 |
| IS 1879 | Bushing and hexagon nipples, type N4 |
| IS 1879 | Hexagon nipples, type N8 |
| IS 1879 | Hexagon nipples, Right and left-hand thread, type N8 R-L |
| IS 1879 | Hexagon nipples, reducing, type N8 |
| IS 1879 | Backnuts, type P4 |
| IS 1879 | Hexagon caps, type T1 |
| IS 1879 | Countersunk plugs, type T11 |
| IS 1879 | Round caps, type T2 |
| IS 1879 | Plain plugs, type T8 |
| IS 1879 | Beaded plugs, type T9 |
| IS 1879 | Unions, flat seat, type U1 |
| IS 1879 | Unions, taper seat, type U11 |
| IS 1879 | Male and female unions, taper seat, type U12 |
| IS 1879 | Male and female unions, flat seat, type U2 |
| IS 1879 | Union elbows, flat seat, type UA1 |
| IS 1879 | Union elbows, taper seat, type UA11 |
| IS 1879 | Male and female union elbows, taper seat, type UA12 |
| IS 1879 | Male and female union elbows, flat seat, type UA2 |
| IS 1879 | Side outlet elbows, type Za1 |
| IS 1879 | Side outlet tees, type Za2 |
| IS 4712 | Socket welding fittings, 45° elbow, class 20 |
| IS 4712 | Socket welding fittings, 45° elbow, class 40 |
| IS 4712 | Socket welding fittings, 90° elbow, class 20 |
| IS 4712 | Socket welding fittings, 90° elbow, class 40 |
| IS 4712 | Socket welding fittings, cross, class 20 |
| IS 4712 | Socket welding fittings, Cross, class 40 |
| IS 4712 | Socket welding fittings, coupling, class 20 |
| IS 4712 | Socket welding fittings, coupling, class 40 |
| IS 4712 | Socket welding fittings, half-coupling, class 20 |
| IS 4712 | Socket welding fittings, half-coupling, class 40 |
| IS 4712 | Socket welding fittings, tee, class 20 |
| IS 4712 | Socket welding fittings, tee, class 40 |
| IS 6094-1 | Hexagon socket set screws with flat point |
| IS 6094-2 | Hexagon socket set screws with cone point |
| IS 6094-3 | Hexagon socket set screws with dog point |
| IS 6094-4 | Hexagon socket set screws with cup point |
| IS 1120 | Hexagon head coach screws |
| IS 1364-1 | Hexagon head bolts part 1 (size range M1.6 to M64) |
| IS 3640 | Hexagon fit bolts with long thread |
| IS 3757 | High Strength Stuctural Bolts |
| IS 6639 | Hexagon bolts for steel structures |
| IS 6761 | Countersunk head screws with hexagon socket |
| IS 2014 | T-bolts |
| IS 4190 | Eye bolts with collars |
| IS 5624 | Foundation bolts |
| IS 5624 A | Foundation bolts, Type A |
| IS 5624 B | Foundation bolts, Type B |
| IS 5624 C | Foundation bolts, Type C |
| IS 5624 D | Foundation bolts, Type D |
| IS 5624 E | Foundation bolts, Type E |
| IS 5624 F | Foundation bolts, Type F |
| IS 5624 G | Foundation bolts, Type G |
| IS 9645 | Hexagon socket pipe plugs |
| IS 2269 | Hexagon socket head cap screws |
| IS 6101 | Slotted pan head screws |
| IS 4297 | Conical seats, type A |
| IS 4297 | Conical seats, type B |
| IS 4297 | Spherical washers |
| IS 3121 TB | Tubular bodies |
| IS 3121 SE | Screwed eyes |
| IS 3121 RSSE | Rigging screws with screwed eyes at both ends |
| IS 3121 RSEF | Rigging screws with screwed eyes and shackle at one end and screwed fork and thimble at other end |
| IS 3121 RSER | Rigging screws with screwed eyes and shackle at one end and wire rope socket at other end |
| IS 3121 STE | Screwed stud eyes |
| IS 3121 SF | Screwed forks |
| IS 3121 OB | Open bodies |
| IS 3121 SSE | Short screwed eyes |
| IS 3121 LSE | Long screwed eyes |
| IS 3121 SWE | Swivel eyes |
| IS 3121 SSDE | Stretching screws double ended type |
| IS 3121 SSSE | Stretching screws single ended type |
| IS 10182-1 TS-L1 | Hot rolled track shoe sections |
| IS 10182-2 TS-H1 | Hot rolled track shoe sections |
| IS 1173 ISDT | Hot rolled and slit steel tee bars, deep legged tee bars, form ISDT |
| IS 1173 ISHT | Hot rolled and slit steel tee bars from H-sections, form ISHT |
| IS 1173 ISLT | Hot rolled and slit steel tee bars, light weight tee bars, form ISLT |
| IS 1173 ISMT | Hot rolled and slit steel tee bars, medium weight tee bars, form ISMT |
| IS 1173 ISNT | Hot rolled and slit steel tee bars, rolled normal tee bars, form ISNT |
| IS 1252 BA | Hot rolled steel bulb angels, L-beams, form BA |
| IS 12778 NPB | Hot rolled parallel flange steel sections for beams, narrow flange beams |
| IS 12778 PBP | Hot rolled parallel flange steel sections for beams, parallel flange bearing piles |
| IS 12778 WPB | Hot rolled parallel flange steel sections for beams, wide flange beams |
| IS 1863 | Rolled steel bulb flats |
| IS 3443 | Crane rails, clause 8.1 |
| IS 3443 | Crane rails, clause 0.3 and 8.3 |
| IS 3954 CHG | Hot rolled steel channel sections |
| IS 3964 | Light rails |
| IS 4923 | Rectangular hollow sections |
| IS 4923 | Square hollow sections |
| IS 808 L | Hot rolled steel beams, L-beam |
| IS 808 HB | Hot rolled steel beams, heavy weight beam |
| IS 808 JB | Hot rolled steel beams, junior beam |
| IS 808 JC | Hot rolled steel beams, junior channel |
| IS 808 LB | Hot rolled steel beams, light weight beam |
| IS 808 LC | Hot rolled steel beams, light weight channel |
| IS 808 MB | Hot rolled steel beams, medium flange beam |
| IS 808 MC | Hot rolled steel beams, medium weight channel |
| IS 808 MCP | Hot rolled steel beams, parallel flange channel |
| IS 808 SC | Hot rolled steel beams, heavy weight beam |
| IS 808 WB | Hot rolled steel beams, wide flange beam |
| IS 1928 1 | Boiler rivets, figure 1, snap head |
| IS 1928 2 | Boiler rivets, figure 2, ipsoid head |
| IS 1928 3 | Boiler rivets, figure 3, pan head, type 1 |
| IS 1928 4 | Boiler rivets, figure 4, pan head, type 2 |
| IS 1928 5 | Boiler rivets, figure 5, pan head with tappered neck |
| IS 1928 6 | Boiler rivets, figure 6, conical head |
| IS 1928 7 | Boiler rivets, figure 7, countersunk head |
| IS 1928 8 | Boiler rivets, figure 8, rounded countersunk head |
| IS 1928 9 | Boiler rivets, figure 9, steeple head |
| IS 2393 | Parallel pins, of unhardened steel and austenitic stainless steel |
| IS 3524-1 | Taper pins with inner thread |
| IS 3524-2 | Taper pins with external thread |
| IS 6688 A | Taper pins, not hardened, form A |
| IS 6688 B | Taper pins, not hardened, form B |
| IS 5988 | Spring dowel sleeves, light pattern |
| IS 5988 | Spring dowel sleeves, heavy pattern |
| IS 2638 | Flat split cotters, black grade |
| IS 2638 | Flat split cotters, precision grade |
| IS 549 | Split pins |
| IS 6862 A | Clevis pins without head, form A |
| IS 6862 B | Clevis pins without head, form B |
| IS 6863 A | Clevis pins with Head, form A |
| IS 6863 B | Clevis pins with Head, form B |
| IS 4870 FB | Flat gaskets for shell flanges, form FB |
| IS 4870 FS | Flat gaskets for shell flanges, form FS |
| IS 2048 A | Parallel keys, type A |
| IS 2048 B | Parallel keys, type B |
| IS 2048 C | Parallel keys, type C |
| IS 2048 D | Parallel keys, type D |
| IS 2048 E | Parallel keys, type E |
| IS 2048 EoS | Parallel keys, type EoS |
| IS 2048 F | Parallel keys, type F |
| IS 2048 FoS | Parallel keys, type FoS |
| IS 2048 G | Parallel keys, type G |
| IS 2048 H | Parallel keys, type H |
| IS 2048 J | Parallel keys, type J |
| IS 2292 A | Taper keys, Form A |
| IS 2292 B | Taper keys, Form B |
| IS 2292 C | Taper keys, Form C |
| IS 6166 A | Thin taper keys, type A |
| IS 6166 B | Thin taper keys, type B |
| IS 6166 C | Thin taper keys, type C |
| IS 6166 | Thin taper keys, gib head key |
| IS 6167 A | Thin parallel keys, type A |
| IS 6167 B | Thin parallel keys, type B |
| IS 6167 C | Thin parallel keys, type C |
| IS 3075-1 | Circlips for shafts |
| IS 3075-2 | Circlips for bores |
| IS 3075-3 | Circlips for shafts, type E |
| IS 4431 | Carbon and carbon-manganese free-cutting steel, circular section impact test piece |
| IS 4431 | Carbon and carbon-manganese free-cutting steel, circular section tensile test piece |
| IS 4431 | Carbon and carbon-manganese free-cutting steel, rectangular section impact test piece |
| IS 4431 | Carbon and carbon-manganese free-cutting steel, rectangular section tensile test piece |
| IS 2758 | Mild steel point hooks for use with wire rope thimbles |
| IS 2759 | Higher tensile steel point hooks for use with wire rope thimbles |
| IS 3815 | Circular section point hooks with shank |
| IS 3815 | Special trapezoidal section point hooks with shank |
| IS 3815 | Standard trapezoidal section point hooks with shank |
| IS 5749 | Circular section point hooks with shank |
| IS/ISO 2415 W | Screwed pins with eye und collar, type W |
| IS/ISO 2415 X | Bolts with hexagon head, hexagon nut and split cotter pin, type X |
| IS/ISO 2415 Y | Countersunk and slotted head pins, type Y |
| IS/ISO 2415 D | Dee shackles |
| IS/ISO 2415 B | Bow shackles |
| IS/ISO 2415 D | Dee shackles with pin |
| IS/ISO 2415 B | Bow shackles with pin |
| IS 2485 O | Drop forged sockets for wire ropes, open type |
| IS 2485 C | Drop forged sockets for wire ropes, closed type |
| IS 3822 | Eye hooks for use with chains |
| IS 2637-S | Steel roller chains, type S |
| IS 2637-C | Steel roller chains, type C |
| IS 2637-C F1 | Steel roller chains, type C, F1 attachment plates |
| IS 2637-C F4 | Steel roller chains, type C, F4 attachment plates |
| IS 2637-S F4 | Steel roller chains, type S, F4 attachment plates |
| IS 2637-S K1 | Steel roller chains, type S, K1 attachment plates |
| IS 2637-C K1 | Steel roller chains, type C, K1 attachment plates |
| IS 2637-S M1 | Steel roller chains, type S, M1 attachment plates |
| IS 2637 | Chain wheels for steel roller chains type S and C |
| IS 2760 A | Steel chain slings, Master Link A |
| IS 2760 B1 | Steel chain slings, Joining Link B1 |
| IS 2760 O-Ring | Steel chain slings, Suspension O-Ring |
| IS 2760 H1 | Steel chain slings, Single-Leg Sling |
| IS 2760 H2 | Steel chain slings, Two-Leg Sling |
| IS 2760 H3 | Steel chain slings, Three-Leg Sling |
| IS 2760 H3A | Steel chain slings, Three-Leg Sling |
| IS 2760 H4 | Steel chain slings, Four-Leg Sling |
| IS 2760 A | Steel chain slings, Master Link A |
| IS 2760 B1 | Steel chain slings, Joining Link B1 |
| IS 2760 O-Ring | Steel chain slings, Suspension O-Ring |
| IS 2760 H1 | Steel chain slings, Single-Leg Sling |
| IS 2760 H2 | Steel chain slings, Two-Leg Sling |
| IS 2760 H3 | Steel chain slings, Three-Leg Sling |
| IS 2760 H3A | Steel chain slings, Three-Leg Sling |
| IS 2760 H4 | Steel chain slings, Four-Leg Sling |
| IS 2429 Type 1 | Round Steel Short Link Chains (Electric Butt Welded) |
| IS 2429 Type 2 | Round Steel Short Link Chains (Electric Butt Welded) |
| IS 2016 | Machined washers |
| IS 2016 A | Punched washers, type A, for hexagonal bolts and screws |
| IS 2016 B | Punched washers, type B, for round and cheese head screws |
| IS 3063 A | Spring lock washers with bent ends, type A |
| IS 3063 B | Spring lock washers with flat ends, type B |
| IS 5370 | Plain washers with outside diameter, type A |
| IS 5370 | Plain washers with outside diameter, type B |
| IS 5372 | Taper washers for channels |
| IS 5374 | Taper washers for I-Beams |
| IS 5554 | Lock washers with lug |
| IS 6610 | Heavy washers for steel structures |
| IS 6649 | Plain hole circular washers, type A |
| IS 6649 | Square taper washers, type B |
| IS 6649 | Square taper washers, type C |
| IS 6735 | Spring lock washers for screws with cylindrical heads |
| IS 4762 | Worm drive hose clamps for general purposes |
| IS 4009-1 | Button head grease nipples |
| IS 4009-2 A | Conical head grease nipples, type A |
| IS 4009-2 B | Conical head grease nipples, type B |
| IS 4009-2 C | Conical head grease nipples, type C |
| IS 4009-2 D | Conical head grease nipples, type D |
| IS 4009-3 A | Grease nipples, type A |
| IS 4009-3 B | Grease nipples, type B |
| IS 4009-3 C | Grease nipples, type C |
| IS 4009-3 D | Grease nipples, type D |
| IS 5548 | Straight nipple adaptors |
| IS 5548 | Angle nipple adaptors |
Status: 09/2023