Standards in PARTsolutions
The Strategic Parts Management PARTsolutions by CADENAS offers engineers access to engineering data from all the most used standard components.
An overview of the available standards can be found here:
AIANASANANSIASASMEASNABSICSNDASTDINDIN_EN_ISOENGBGOSTISISOJB-TJISKSLNMSMS_LIBRARYNASNASMNFNF_EN_ISONIHSNSAPNSAESISUICUNECEUNIUNI_EN_ISOVG
Included
| DIN 2573 A | Flanges, clogged for soldering or welding nominal pressure 6, form A |
| DIN 2573 AS | Flanges, clogged for soldering or welding nominal pressure 6, form AS |
| DIN 2573 B | Flanges, clogged for soldering or welding nominal pressure 6, form B |
| DIN 2573 BS | Flanges, clogged for soldering or welding nominal pressure 6, form BS |
| DIN 2576 A | Flanges, clogged for soldering or welding nominal pressure 10, form A |
| DIN 2576 AS | Flanges, clogged for soldering or welding nominal pressure 10, form AS |
| DIN 2576 B | Flanges, clogged for soldering or welding nominal pressure 10, form B |
| DIN 2576 BS | Flanges, clogged for soldering or welding nominal pressure 10, form BS |
| DIN 2641 F | Lapped flanges - nominal pressure 6, form F |
| DIN 2642 F | Lapped flanges - nominal pressure 10, form F |
| DIN 3159 O | Flanged connections, oval |
| DIN 3159 R | Flanged connections, round |
| DIN 3159 V | Flanged connections square |
| DIN 71501 A | Oval flanges for motor vehicles, form A |
| DIN 71501 AG | Oval flanges for motor vehicles, form AG |
| DIN 71501 B | Oval flanges for motor vehicles, form B |
| DIN 71501 BA | Oval flanges for motor vehicles, form BA |
| DIN 71501 BAG | Oval flanges for motor vehicles, form BAG |
| DIN 71501 BG | Oval flanges for motor vehicles, form BG |
| DIN 2527 ND 6 | Blind flanges nominal pressure 6 |
| DIN 2527 ND 10 | Blind flanges nominal pressure 10 |
| DIN 2527 ND 16 | Blind flanges nominal pressure 16 |
| DIN 2527 ND 25 | Blind flanges nominal pressure25 |
| DIN 2527 ND 40 | Blind flanges nominal pressure 40 |
| DIN 2527 E ND 64 | Blind flanges nominal pressure 64 |
| DIN 2527 E ND 100 | Blind flanges nominal pressure 100 |
| DIN 28122 C | Blank flanges with plane gasket |
| DIN 28122 F | Blank flanges with spring |
| DIN 28122 V | Blank flanges with nose |
| DIN 2848 | Flanged steel pipes and flanged steel or iron fittings with lining - PN 10, PN 25 and PN 40, blind flanges |
| DIN 2673 | Loose flanges nominal pressure 10 |
| DIN 28117 A | Block flanges for vessels and process apparatus, without welding lug |
| DIN 28117 B | Block flanges for vessels and process apparatus, with welding lug |
| DIN 28117 C | Block flanges for vessels and process apparatus, with height adjustment |
| DIN 28117 D | Block flanges for vessels and process apparatus, with coat form |
| DIN 2558 A | Oval thread flanges, slick - nominal pressure 6, form A |
| DIN 2558 B | Oval thread flanges, slick - nominal pressure 6, form B |
| DIN 2561 C | Oval thread flanges with rudiment nominal pressure 10 and 16 |
| DIN 2566 C | Screwing flanges with rudiment - Nominal pressure 10 - 18 |
| DIN 11853-2 NF | Stainless steel fittings for the food and chemical industry - Part 2: Hygienic flanged pipe connection, short type |
| DIN 11853-2 BF | Stainless steel fittings for the food and chemical industry - Part 2: Hygienic flanged pipe connection, short type |
| DIN 11853-2 R | Stainless steel fittings for the food and chemical industry - Part 2: Hygienic flanged pipe connection, short type |
| DIN 11853-2 F | Stainless steel fittings for the food and chemical industry - Part 2: Hygienic flanged pipe connection, short type |
| DIN 11853-2 BNF | Stainless steel fittings for the food and chemical industry - Part 2: Hygienic flanged pipe connection, short type |
| DIN 11853-2 BBF | Stainless steel fittings for the food and chemical industry - Part 2: Hygienic flanged pipe connection, short type |
| DIN 11864-1 A | Fittings of stainless steel for the aseptic, chemical and pharmaceutical industry - Part 1: Aseptic screwed pipe connection, standard type, form A |
| DIN 11864-1 B | Fittings of stainless steel for the aseptic, chemical and pharmaceutical industry - Part 1: Aseptic screwed pipe connection, standard type, form B |
| DIN 11864-1 BS-A | Fittings of stainless steel for the aseptic, chemical and pharmaceutical industry - Part 1: Aseptic screwed pipe connection, standard type, form A |
| DIN 11864-1 BS-B | Fittings of stainless steel for the aseptic, chemical and pharmaceutical industry - Part 1: Aseptic screwed pipe connection, standard type, form B |
| DIN 11864 FD | Fittings of stainless steel for the aseptic, chemical and pharmaceutical industry - Part 1: Aseptic screwed pipe connection, standard type, form A |
| DIN 11864-1 GS-A | Fittings of stainless steel for the aseptic, chemical and pharmaceutical industry - Part 1: Aseptic screwed pipe connection, standard type, form A |
| DIN 11864-1 GS-B | Fittings of stainless steel for the aseptic, chemical and pharmaceutical industry - Part 1: Aseptic screwed pipe connection, standard type, form B |
| DIN 11864 R | Fittings of stainless steel for the aseptic, chemical and pharmaceutical industry - Part 1: Aseptic screwed pipe connection, standard type, form A |
| DIN 11864-2 A | Stainless steel fittings for the aseptic, chemical and pharmaceutical industry - Part 2: Aseptic flanged pipe connection, standard type, form A |
| DIN 11864-2 B | Stainless steel fittings for the aseptic, chemical and pharmaceutical industry - Part 2: Aseptic flanged pipe connection, standard type, form B |
| DIN 11864-2 BF-A | Stainless steel fittings for the aseptic, chemical and pharmaceutical industry - Part 2: Aseptic flanged pipe connection, standard type, form A |
| DIN 11864-2 BF-B | Stainless steel fittings for the aseptic, chemical and pharmaceutical industry - Part 2: Aseptic flanged pipe connection, standard type, form B |
| DIN 11864-2 NF-A | Stainless steel fittings for the aseptic, chemical and pharmaceutical industry - Part 2: Aseptic flanged pipe connection, standard type, form A |
| DIN 11864-2 NF-B | Stainless steel fittings for the aseptic, chemical and pharmaceutical industry - Part 2: Aseptic flanged pipe connection, standard type, form B |
| DIN 11864-3 A | Stainless steel fittings for the aseptic, chemical and pharmaceutical industry - Part 3: Aseptic clamp pipe connection, standard type, form A |
| DIN 11864-3 B | Stainless steel fittings for the aseptic, chemical and pharmaceutical industry - Part 3: Aseptic clamp pipe connection, standard type, form B |
| DIN 11864-3 BKS-A | Stainless steel fittings for the aseptic, chemical and pharmaceutical industry - Part 2: Aseptic flanged pipe connection, standard type, form A |
| DIN 11864-3 BKS-B | Stainless steel fittings for the aseptic, chemical and pharmaceutical industry - Part 2: Aseptic flanged pipe connection, standard type, form B |
| DIN 11864-3 NKS-A | Stainless steel fittings for the aseptic, chemical and pharmaceutical industry - Part 2: Aseptic flanged pipe connection, standard type, form A |
| DIN 11864-3 NKS-B | Stainless steel fittings for the aseptic, chemical and pharmaceutical industry - Part 2: Aseptic flanged pipe connection, standard type, form B |
| DIN 2627 | Pre welded flanges, nominal pressure 400 |
| DIN 2628 | Pre welded flanges, nominal pressure 250 |
| DIN 2629 | Pre welded flanges, nominal pressure 320 |
| DIN 2630 | Pre welded flanges, nominal pressure 1 and 2,5 |
| DIN 2631 | Pre welded flanges, nominal pressure 6 |
| DIN 2632 | Pre welded flanges, nominal pressure 10 |
| DIN 2633 | Pre welded flanges, nominal pressure 16 |
| DIN 2634 | Pre welded flanges, nominal pressure 25 |
| DIN 2635 | Pre welded flanges, nominal pressure 40 |
| DIN 2636 | Pre welded flanges, nominal pressure 64 |
| DIN 2637 | Pre welded flanges, nominal pressure 100 |
| DIN 2638 | Pre welded flanges, nominal pressure 160 |
| DIN 28031 A | Weld flanges for unpressurized vessels and process apparatus of non-alloy and stainless steel, form A |
| DIN 28031 B | Weld flanges for unpressurized vessels and process apparatus of non-alloy and stainless steel, form B |
| DIN 28034 | Profile |
| DIN 28034 A | Welding neck flanges for pressure vessels and process apparatus of non-alloy steel, form A |
| DIN 28034 C | Welding neck flanges for pressure vessels and process apparatus of non-alloy steel, form C |
| DIN 28034 D | Welding neck flanges for pressure vessels and process apparatus of non-alloy steel, form D |
| DIN 28034 E | Welding neck flanges for pressure vessels and process apparatus of non-alloy steel, form E |
| DIN 28034 F | Welding neck flanges for pressure vessels and process apparatus of non-alloy steel, form F |
| DIN 28124-1 SA | Manhole closures - Part 1: for pressure vessels, form SA piece sealing surface, smooth |
| DIN 28124-1 DA | Manhole closures - Part 1: for pressure vessels, form DA lids sealing surface, smooth |
| DIN 28124-1 MA | Manhole closures - Part 1: for non-pressurized containers, closures form MA sealing surface, smooth |
| DIN 28124-1 SB | Manhole closures - Part 1: for pressure vessels, form SB piece sealing surface, smooth |
| DIN 28124-1 DB | Manhole closures - Part 1: for pressure vessels, form DB lids sealing surface, smooth |
| DIN 28124-1 MB | Manhole closures - Part 1: for non-pressurized containers, closures form MB sealing surface, smooth |
| DIN 28124-1 SG | Manhole closures - Part 1: for pressure vessels, form SG piece sealing surface, smooth |
| DIN 28124-1 DG | Manhole closures - Part 1: for pressure vessels, form DG lids sealing surface, smooth |
| DIN 28124-1 MG | Manhole closures - Part 1: for non-pressurized containers, closures form MG sealing surface, smooth |
| DIN 28124-2 SC | Manhole closures - Part 2: for pressure vessels, form steel, form SC connectors sealing surface, smooth |
| DIN 28124-2 DC | Manhole closures - Part 2: for pressure vessels, form steel, form DC lids sealing surface, smooth |
| DIN 28124-2 MC | Manhole closures - Part 2: for pressure vessels, form steel, form MC closures sealing surface, smooth |
| DIN 28124-2 SD | Manhole closures - Part 2: for pressure vessels, form steel, form SD connectors sealing surface smooth with surface protection |
| DIN 28124-2 DD | Manhole closures - Part 2: for pressure vessels, form steel, form DD lids sealing surface smooth with surface protection |
| DIN 28124-2 MD | Manhole closures - Part 2: for pressure vessels, form steel, form MD closures sealing surface smooth with surface protection |
| DIN 28124-2 SE | Manhole closures - Part 2: for pressure vessels, form steel, form SE connectors groove |
| DIN 28124-2 DE | Manhole closures - Part 2: for pressure vessels, form steel, form DE lids spring |
| DIN 28124-2 ME | Manhole closures - Part 2: for pressure vessels, form steel, form ME closures spring and groove |
| DIN 28124-2 SF | Manhole closures - Part 2: for pressure vessels, form steel, form SF connectors return |
| DIN 28124-2 DF | Manhole closures - Part 2: for pressure vessels, form steel, form DF lids forward |
| DIN 28124-2 MF | Manhole closures - Part 2: for pressure vessels, form steel, form MF closures forward and return |
| DIN 28124-3 SH | Manhole closures - Part 3: pressure vessel disguised, form SH connectors sealing surface, smooth |
| DIN 28124-3 DH | Manhole closures - Part 3: pressure vessel disguised, form DH lids sealing surface, smooth |
| DIN 28124-3 MH | Manhole closures - Part 3: pressure vessel disguised, form MH closures sealing surface, smooth |
| DIN 28124-3 SJ | Manhole closures - Part 3: pressure vessel disguised, form SJ pipe sealing surface groove |
| DIN 28124-3 DJ | Manhole closures - Part 3: pressure vessel disguised, form DJ lids sealing surface, spring |
| DIN 28124-3 MJ | Manhole closures - Part 3: pressure vessel disguised, form MJ closures sealing face, tongue and groove |
| DIN 28124-3 SK | Manhole closures - Part 3: pressure vessel disguised, form SK pipe sealing surface, return |
| DIN 28124-3 DK | Manhole closures - Part 3: pressure vessel disguised, form DK lids sealing surface projection |
| DIN 28124-3 MK | Manhole closures - Part 3: pressure vessel disguised, form MK closures sealing surface, forward and return |
| DIN 28124-4 V | Manhole closures - Part 4: Swivel devices, form V vertical arrangement |
| DIN 28124-4 H | Manhole closures - Part 4: Swivel devices, form H horizontal arrangement |
| DIN 28125-1 VEC | Hinged closures, round - Part 1: Nominal diameter DN 150 to DN 800, form VEC |
| DIN 28125-1 VGC | Hinged closures, round - Part 1: Nominal diameter DN 500 to DN 800, form VGC |
| DIN 28125-1 VEN | Hinged closures, round - Part 1: Nominal diameter DN 150 to DN 800, form VEN |
| DIN 28125-1 VGN | Hinged closures, round - Part 1: Nominal diameter DN 500 to DN 800, form VGN |
| DIN 2848 A | Flanged steel pipes and flanged steel or iron fittings with lining - PN 10, PN 25 and PN 40, elbows, form A |
| DIN 2848 B | Flanged steel pipes and flanged steel or iron fittings with lining - PN 10, PN 25 and PN 40, elbows, form B |
| DIN 2848 C | Flanged steel pipes and flanged steel or iron fittings with lining - PN 10, PN 25 and PN 40, elbows, form C |
| DIN 2848 D | Flanged steel pipes and flanged steel or iron fittings with lining - PN 10, PN 25 and PN 40, elbows, form D |
| DIN 2848 T | Flanged steel pipes and flanged steel or iron fittings with lining - PN 10, PN 25 and PN 40, flanged tees, form T |
| DIN 2848 E | Flanged steel pipes and flanged steel or iron fittings with lining - PN 10, PN 25 and PN 40, flange reducers, form E |
| DIN 2848 K | Flanged steel pipes and flanged steel or iron fittings with lining - PN 10, PN 25 and PN 40, flange reducers, form K |
| DIN 2848 K1 | Flanged steel pipes and flanged steel or iron fittings with lining - PN 10, PN 25 and PN 40, reducing flanges (concentric), form K1 |
| DIN 2848 K2 | Flanged steel pipes and flanged steel or iron fittings with lining - PN 10, PN 25 and PN 40, reducing flanges (concentric), form K2 |
| DIN 2848 K3 | Flanged steel pipes and flanged steel or iron fittings with lining - PN 10, PN 25 and PN 40, reducing flanges (concentric), form K3 |
| DIN 2848 E2 | Flanged steel pipes and flanged steel or iron fittings with lining - PN 10, PN 25 and PN 40, reducing flanges (eccentric), form E2 |
| DIN 2848 E3 | Flanged steel pipes and flanged steel or iron fittings with lining - PN 10, PN 25 and PN 40, reducing flanges (eccentric), form E3 |
| DIN 2848 F | Flanged steel pipes and flanged steel or iron fittings with lining - PN 10, PN 25 and PN 40, spacers, form F |
| DIN 2848 G | Flanged steel pipes and flanged steel or iron fittings with lining - PN 10, PN 25 and PN 40, spacers, form G |
| DIN 2848 H | Flanged steel pipes and flanged steel or iron fittings with lining - PN 10, PN 25 and PN 40, spacers, form H |
| DIN 2848 | Flanged steel pipes and flanged steel or iron fittings with lining - PN 10, PN 25 and PN 40, flange pipe |
| DIN 2848 | Flanged steel pipes and flanged steel or iron fittings with lining - PN 10, PN 25 and PN 40, measuring socket |
| DIN 16281 A(G) | Measuring device holder for wall, pipe and frame mounting in cast construction, form A(G) |
| DIN 16281 A(S) | Measuring device holder for wall, pipe and frame mounting in welded construction, form A(S) |
| DIN 16281 H(G) | Measuring device holder for wall mounting in cast construction, form H (G) |
| DIN 16281 H(S) | Measuring device holder for wall mounting in welded construction, form H(S) |
| DIN 16281 | Adapter for pressure gauges |
| DIN 2814 1 | Inverted nuts |
| DIN 2814 2 | Valve tapers |
| DIN 2814 3 | Tappet |
| DIN 2814 S | Valve units |
| DIN 2814 6 | Gasket rings |
| DIN 2814 A | Valves, form A |
| DIN 2814 B | Valves, form B |
| DIN 2814 C | Valves, form C |
| DIN 2814 D | Breather screws, form D |
| DIN 2814 E | Screws, form E |
| DIN 2605-1 Series 1 | Elbow pipes, reduce efficiency, Series 1 |
| DIN 2605-1 Series 2 | Elbow pipes, reduce efficiency, Series 2 |
| DIN 2605-1 Series 3 | Elbow pipes, reduce efficiency, Series 3 |
| DIN 2605-1 Series 4 | Elbow pipes, reduce efficiency, Series 4 |
| DIN 2605-1 Series 5 | Elbow pipe, reduce efficiency, Series 5 |
| DIN 2605-2 Series 1 | Fittings for welding - elbows - Part 2: Row 1 |
| DIN 2605-2 Series 2 | Fittings for welding - elbows - Part 2: Row 2 |
| DIN 2605-2 Series 3 | Fittings for welding - elbows - Part 2: Row 3 |
| DIN 2605-2 Series 4 | Fittings for welding - elbows - Part 2: Row 4 |
| DIN 2605-2 Series 5 | Fittings for welding - elbows - Part 2: Row 5 |
| DIN 2618 | Butt weldings fittings, welding saddles, nominal pressure 16 |
| DIN 2607 | Tube bends - For butt-welding of copper |
| DIN 11852 BS-90 | Fittings of stainless steel, form BS-90 |
| DIN 11852 BS-45 | Fittings of stainless steel, form BS-45 |
| DIN 11852 BS-180 | Fittings of stainless steel, form BS-180 |
| DIN 11852 BA5-90 | Fittings of stainless steel, form BA5-180 |
| DIN 11852 BL-90 | Fittings of stainless steel, form BL-90 |
| DIN 11852 BL-45 | Fittings of stainless steel, form BL-45 |
| DIN 11865 BL-90 A | Elbows for welding stainless steel, pipe series A to DIN 11866 |
| DIN 11865 BL-90 B | Elbows for welding stainless steel, pipe series B to DIN 11866 |
| DIN 11865 BL-90 C | Elbows for welding stainless steel, pipe series C to DIN 11866 |
| DIN 11865 BL-45 A | Elbows for welding stainless steel, pipe series A to DIN 11866 |
| DIN 11865 BL-45 B | Elbows for welding stainless steel, pipe series B to DIN 11866 |
| DIN 11865 BL-45 C | Elbows for welding stainless steel, pipe series C to DIN 11866 |
| DIN 2856-11 5002 A | Capillary soldering fittings, elbows 90° |
| DIN 2856-11 5001 A | Capillary soldering fittings, elbows 90° |
| DIN 2856-11 5041 | Capillary soldering fittings, elbows 45° |
| DIN 2856-11 5040 | Capillary soldering fittings, elbows 45° |
| DIN 2856-11 4090g | Capillary soldering fittings, solder angle with internal thread |
| DIN 2856-11 4472g | Capillary soldering fittings, ceiling bracket with two hole flange |
| DIN 2856-11 4092g | Capillary soldering fittings, solder angle with male thread |
| DIN 2616-1 WDR1 | Reducers |
| DIN 2616-1 WDR2 | Reducers |
| DIN 2616-1 WDR3 | Reducers |
| DIN 2616-1 WDR4 | Reducers |
| DIN 2616-1 WDR5 | Reducers |
| DIN 2616-2 E WDR 1 | Reducing sockets, full utilization factor, eccentric, row of wall thickness 1 |
| DIN 2616-2 E WDR 2 | Reducing sockets, full utilization factor, eccentric, row of wall thickness 2 |
| DIN 2616-2 E WDR 3 | Reducing sockets, full utilization factor, eccentric, row of wall thickness 3 |
| DIN 2616-2 E WDR 4 | Reducing sockets, full utilization factor, eccentric, row of wall thickness 4 |
| DIN 2616-2 E WDR 5 | Reducing sockets, full utilization factor, eccentric, row of wall thickness 5 |
| DIN 2616-2 K WDR 1 | Reducing sockets, full utilization factor, concentric, row of wall thickness 1 |
| DIN 2616-2 K WDR 2 | Reducing sockets, full utilization factor, concentric, row of wall thickness 2 |
| DIN 2616-2 K WDR 3 | Reducing sockets, full utilization factor, concentric, row of wall thickness 3 |
| DIN 2616-2 K WDR 4 | Reducing sockets, full utilization factor, concentric, row of wall thickness 4 |
| DIN 2616-2 K WDR 5 | Reducing sockets, full utilization factor, concentric, row of wall thickness 5 |
| DIN 11852 RK | Fittings of stainless steel, form RK |
| DIN 11852 RE | Fittings of stainless steel, form RE |
| DIN 11865 RK-A | Reducing pieces for welding stainless steel, pipe series A to DIN 11866 |
| DIN 11865 RK-B | Reducing pieces for welding stainless steel, pipe series B to DIN 11866 |
| DIN 11865 RK-C | Reducing pieces for welding stainless steel, pipe series C to DIN 11866 |
| DIN 11865 RE-A | Reducing pieces for welding stainless steel, pipe series A to DIN 11866 |
| DIN 11865 RE-B | Reducing pieces for welding stainless steel, pipe series B to DIN 11866 |
| DIN 11865 RE-C | Reducing pieces for welding stainless steel, pipe series C to DIN 11866 |
| DIN 2856-11 5270 | Capillary soldering fittings, sleeves |
| DIN 2856-11 5243 | Capillary soldering fittings, reducing nipples |
| DIN 2856-11 5240 | Capillary soldering fittings, reducing sleeves |
| DIN 2615-1 WDR 1 | Shape of shrink-warp, T-pieces, reduce effiency |
| DIN 2615-1 WDR 2 | Shape of shrink-warp, T-pieces, reduce effiency |
| DIN 2615-1 WDR 3 | Shape of shrink-warp, T-pieces, reduce effiency |
| DIN 2615-1 WDR 4 | Shape of shrink-warp, T-pieces, reduce effiency |
| DIN 2615-1 WDR 5 | Shape of shrink-warp, T-pieces, reduce effiency |
| DIN 2615-2 WDR1 | Shape of shrink-warp, T-pieces, reduce effiency |
| DIN 2615-2 WDR2 | Shape of shrink-warp, T-pieces, reduce effiency |
| DIN 2615-2 WDR3 | Shape of shrink-warp, T-pieces, reduce effiency |
| DIN 2615-2 WDR4 | Shape of shrink-warp, T-pieces, reduce effiency |
| DIN 2615-2 WDR5 | Shape of shrink-warp, T-pieces, reduce effiency |
| DIN 11852 TS | Fittings of stainless steel, form TS |
| DIN 11852 TK | Fittings of stainless steel, form TK |
| DIN 11852 RTS | Fittings of stainless steel, form RTS |
| DIN 11852 RTK | Fittings of stainless steel, form RTK |
| DIN 11865 T-A | Tees for welding stainless steel, pipe series A to DIN 11866 |
| DIN 11865 T-B | Tees for welding stainless steel, pipe series B to DIN 11866 |
| DIN 11865 T-C | Tees for welding stainless steel, pipe series C to DIN 11866 |
| DIN 11865 TK-A | Tees for welding stainless steel, pipe series A to DIN 11866 |
| DIN 11865 TK-B | Tees for welding stainless steel, pipe series B to DIN 11866 |
| DIN 11865 TK-C | Tees for welding stainless steel, pipe series C to DIN 11866 |
| DIN 2856-11 5130 | Capillary soldering fittings, tees |
| DIN 2856-11 5130 | Capillary soldering fittings, tees |
| DIN 2856-11 4130g | Capillary soldering fittings, tees with internal threaded outlet |
| DIN 2617 | Shapes to shrink-wrap, caps |
| DIN 28011 | Torispherical heads |
| DIN 28013 | Ellipsoidal heads |
| DIN 2696 PN 63 | Lens shaped gaskets for flanges according to DIN EN 1092-1 (PN 63) |
| DIN 2696 PN 64 series 2 | Lens shaped gaskets series 2 for flanges DIN 2636: 1975-03 - series 2 (PN 64) |
| DIN 2696 PN 100 | Lens shaped gaskets for flanges according to DIN EN 1092-1 (PN 100) |
| DIN 2696 PN 100 series 2 | Lens shaped gaskets series 2 for flanges DIN 2637: 1975-03 - series 2 (PN 100) |
| DIN 2696 PN 160 | Lens shaped gaskets for flanges according to DIN EN 1092-1 (PN 160) |
| DIN 2696 PN 160 series 2 | Lens shaped gaskets series 2 for flanges DIN 2638 - series 2 (PN 160) |
| DIN 2696 PN 250 | Lens shaped gaskets for flanges according to DIN EN 1092-1 (PN 250) |
| DIN 2696 PN 250 series 2 | Lens shaped gaskets series 2 for flanges DIN 2628 - series 2 (PN 250) |
| DIN 2696 PN 320 | Lens shaped gaskets for flanges according to DIN EN 1092-1 (PN 320) |
| DIN 2696 PN 320 series 2 | Lens shaped gaskets series 2 for flanges DIN 2629 - series 2 (PN 320) |
| DIN 2696 PN 400 | Lens shaped gaskets for flanges according to DIN EN 1092-1 (PN 400) |
| DIN 2690 ND 1 | Sealing for flanges with plain contact surfaces - nominal pressure 1 |
| DIN 2690 ND 10 | Sealing for flanges with plain contact surfaces - nominal pressure 10 |
| DIN 2690 ND 16 | Sealing for flanges with plain contact surfaces - nominal pressure 16 |
| DIN 2690 ND 2.5 | Sealing for flanges with plain contact surfaces - nominal pressure 2.5 |
| DIN 2690 ND 25 | Sealing for flanges with plain contact surfaces - nominal pressure 25 |
| DIN 2690 ND 40 | Sealing for flanges with plain contact surfaces - nominal pressure 40 |
| DIN 2690 ND 6 | Sealing for flanges with plain contact surfaces - nominal pressure 6 |
| DIN 2691 | Sealing for flanges - nominal pressure 10 - 160 |
| DIN 2692 | Sealing for flanges with recess - nominal pressure 10 - 100 |
| DIN 71511 | Gaskets for oval flanges |
| DIN 3018 A | Oiler indicators, form A |
| DIN 3018 B | Oil level indicators, form B |
| DIN 3018 C | Oil level indicators, form C |
| DIN 3018 D | Oil level indicators, form D |
| DIN 3018 E | Oil level indicators, form E |
| DIN 3410 C1 | Oiler, form C1, directly |
| DIN 3410 C2 | Oiler, form C2, angular |
| DIN 3410 C3 | Oiler, form C3, directly |
| DIN 3410 E | Oiler, form E |
| DIN 3410 F | Oiler, form F |
| DIN 3411 A | Grease cups, form A |
| DIN 3411 B | Grease cups, form B |
| DIN 3411 D | Grease cups, form D |
| DIN 31691 A | Oil level eyes, form A |
| DIN 31691 B | Oil level eyes, form B |
| DIN 11850 | Pipes of rustfree steel for food |
| DIN 16842 | Pipes made of polyethylene (PE) - PE-HD for pressureless applications |
| DIN 1754-1 | Tubes of copper, seamless drawn |
| DIN 1754-2 | Tubes of copper, seamless drawn |
| DIN 1754-3 | Tubes of copper, seamless drawn |
| DIN 2391-1 | Welded precision steel pipes with special dimensional accuracy |
| DIN 2393-1 | Welded precision steel pipes with special dimensional accuracy |
| DIN 2413 | Seamless steel tubes for oil- and water-hydraulic systems |
| DIN 2440 | Steel tubes, medium-weight suitable for screwing |
| DIN 2441 | Steel tubes, heavy-weight suitable for screwing |
| DIN 2442 | Tubes with quality specification |
| DIN 2448 | Plain end seamless steel tubes |
| DIN 2458 | Plain end welded steel tubes |
| DIN 2462-1 | Seamless tubes, stainless steels, ferritic, austenitic |
| DIN 2462-1 | Seamless tubes, stainless steels |
| DIN 2463-1 | Welded austenitic stainless steel tubes |
| DIN 2982 | Double nipples heavy |
| DIN 2982 | Pipe nipples |
| DIN 8062 | Unplasticised polyvinyl chlorid pipes |
| DIN 8072 | Pipes of polyethylene, soft |
| DIN 8074 | Pipes of polyethylene (PE) PE 80, PE 100 |
| DIN 8077 | Polypropylene pipes |
| DIN 16965 PN 6 | Pipes of glass fibre reinforced polyester resins; wound, pipetype B, nominal pressure PN 6 |
| DIN 16965 PN 10 | Pipes of glass fibre reinforced polyester resins; wound, pipetype B, nominal pressure PN 10 |
| DIN 16965 PN 16 | Pipes of glass fibre reinforced polyester resins; wound, pipetype B, nominal pressure PN 16 |
| DIN 86087 S | Fittings for butt welding into copper-nickel-alloy pipelines - Saddle type connections, form S |
| DIN 86087 W | Fittings for butt welding into copper-nickel-alloy pipelines - Saddle type connections, form W |
| DIN 86088 S | Fittings for butt welding into copper-nickel-alloy pipelines - Teees, form S |
| DIN 86088 W | Fittings for butt welding into copper-nickel-alloy pipelines - Teees, form W |
| DIN 86089 S | Fittings for butt welding into copper-nickel-alloy pipelines - Concentric reducers, form S |
| DIN 86089 W | Fittings for butt welding into copper-nickel-alloy pipelines - Concentric reducers, form W |
| DIN 86090 S | Fittings for butt welding into copper-nickel-alloy pipelines - Elbows, form S |
| DIN 86090 W | Fittings for butt welding into copper-nickel-alloy pipelines - Elbows, form W |
| DIN 3237-1 | Straight pattern valves with flange socket placed in main power connection |
| DIN 87901 C | Valves for pumps |
| DIN 16168 B | Machine glass thermometers with round housing, form B |
| DIN 16168 C | Machine glass thermometers with round housing, form C |
| DIN 16181 B | Thermometers, form B |
| DIN 16181 B1 | Thermometers, form B1 |
| DIN 16181 C | Thermometers, form C |
| DIN 16185 B | Top V-shape straight type glass thermometers, form B |
| DIN 16185 C | Top V-shape straight type glass thermometers, form C |
| DIN 16185 G | Housing |
| DIN 16185 TH | Thermometer employments |
| DIN 16186 B | Top V-shape 90° angle type glass thermometers of nominal size 150, form B |
| DIN 16186 C | Top V-shape 90° angle type glass thermometers of nominal size 150, form C |
| DIN 16186 G | Housing |
| DIN 16186 S | Top V-shape 90° angle type glass thermometers of nominal size 150, form S |
| DIN 16186 TH | Thermometer employments |
| DIN 16189 | Sheet glass thermometers with V-shaped cabinet |
| DIN 16189 G | Housing |
| DIN 16189 TH | Thermometer employments |
| DIN 43735 | Electrical temperature sensors, inserts for thermocouple thermometers |
| DIN 43762 | Electrical temperature measuring sensors, inserts for resistance elements |
| DIN 43772 1 | Metal pipes and tubes for machines neck-glass thermometer pointer thermometers, thermocouples and resistance thermometers, form 1 |
| DIN 43772 2 | Metal pipes and tubes for machines neck-glass thermometer pointer thermometers, thermocouples and resistance thermometers, form 2 |
| DIN 43772 2F | Metal pipes and tubes for machines neck-glass thermometer pointer thermometers, thermocouples and resistance thermometers, form 2F |
| DIN 43772 2G | Metal pipes and tubes for machines neck-glass thermometer pointer thermometers, thermocouples and resistance thermometers, form 2G |
| DIN 43772 3 | Metal pipes and tubes for machines neck-glass thermometer pointer thermometers, thermocouples and resistance thermometers, form 3 |
| DIN 43772 3F | Metal pipes and tubes for machines neck-glass thermometer pointer thermometers, thermocouples and resistance thermometers, form 3F |
| DIN 43772 3G | Metal pipes and tubes for machines neck-glass thermometer pointer thermometers, thermocouples and resistance thermometers, form 3G |
| DIN 43772 4 | Metal pipes and tubes for machines neck-glass thermometer pointer thermometers, thermocouples and resistance thermometers, form 4 |
| DIN 43772 4F | Metal pipes and tubes for machines neck-glass thermometer pointer thermometers, thermocouples and resistance thermometers, form 4F |
| DIN 43772 5 | Metal pipes and tubes for machines neck-glass thermometer pointer thermometers, thermocouples and resistance thermometers, form 5 |
| DIN 43772 6 | Metal pipes and tubes for machines neck-glass thermometer pointer thermometers, thermocouples and resistance thermometers, form 6 |
| DIN 43772 7 | Metal pipes and tubes for machines neck-glass thermometer pointer thermometers, thermocouples and resistance thermometers, form 7 |
| DIN 43772 8 | Metal pipes and tubes for machines neck-glass thermometer pointer thermometers, thermocouples and resistance thermometers, form 8 |
| DIN 43772 9 | Metal pipes and tubes for machines neck-glass thermometer pointer thermometers, thermocouples and resistance thermometers, form 9 |
| DIN 43772 HL | Metal pipes and tubes for machines neck-glass thermometer pointer thermometers, thermocouples and resistance thermometers, neck tubes |
| DIN 28080 AV | Saddle supports for horizontal apparatus, form AV |
| DIN 28080 BV | Saddle supports for horizontal apparatus, form BV |
| DIN 28080 CV | Saddle supports for horizontal apparatus, form CV |
| DIN 28080 D | Saddle supports for horizontal apparatus, form D |
| DIN 28080 | Saddle supports for horizontal apparatus, sliding |
| DIN 28081-1 F | Tubular supports for vessels, form F |
| DIN 28081-1 S | Tubular supports for vessels, form S |
| DIN 28081-2 KM | Steel profile supports for vessels, form KM |
| DIN 28081-2 MM | Steel profile supports for vessels, form MM |
| DIN 28081-3 B | Tubular supports for vessels, form B |
| DIN 28082-1 A | Skirts for apparatus, Part 1: With simple bottom ring, form A |
| DIN 28082-1 B | Skirts for apparatus, Part 1: With simple bottom ring, form B |
| DIN 28082-2 D | Skirts for apparatus, form D |
| DIN 28082-2 P | Skirts for apparatus, form P |
| DIN 28083-1 A | Bracket supports, form A |
| DIN 28083-1 B | Bracket supports, form B |
| DIN 28084 AEF | Support rings and ring supports on apparatus, form AEF |
| DIN 28084 AEU | Support rings and ring supports on apparatus, form AEU |
| DIN 28084 AEZ | Support rings and ring supports on apparatus, form AEZ |
| DIN 28084 BEF | Support rings and ring supports on apparatus, form BEF |
| DIN 28084 BEU | Support rings and ring supports on apparatus, form BEU |
| DIN 28084 BEZ | Support rings and ring supports on apparatus, form BEZ |
| DIN 28084 BHF | Support rings and ring supports on apparatus, form BHF |
| DIN 28084 CEF | Support rings and ring supports on apparatus, form CEF |
| DIN 28084 CEU | Support rings and ring supports on apparatus, form CEU |
| DIN 28084 CEZ | Support rings and ring supports on apparatus, form CEZ |
| DIN 28084 CHF | Support rings and ring supports on apparatus, form CHF |
| DIN 28084 CHU | Support rings and ring supports on apparatus, form CHU |
| DIN 28084 CHZ | Support rings and ring supports on apparatus, form CHZ |
| DIN 28084 DEF | Support rings and ring supports on apparatus, form DEF |
| DIN 28084 DEU | Support rings and ring supports on apparatus, form DEU |
| DIN 28084 DEZ | Support rings and ring supports on apparatus, form DEZ |
| DIN 28084 DHF | Support rings and ring supports on apparatus, form DHF |
| DIN 28084 DHU | Support rings and ring supports on apparatus, form DHU |
| DIN 28084 DHZ | Support rings and ring supports on apparatus, form DHZ |
| DIN 28085 A | Lifting lugs on apparatuses for mounting, form A |
| DIN 28085 B | Lifting lugs on apparatuses for mounting, form B |
| DIN 28086 | Eyelets on apparatuses for mounting |
| DIN 28087 | Top head type lifting lugs on apparatuses |
| DIN 28086 A | Eyelets for mounting vessels and apparatuses, form A |
| DIN 28086 B | Eyelets for mounting vessels and apparatuses, form B |
| DIN 3570 A | Steel straps, for pipes of NW 20 to 500, form A |
| DIN 3570 B | Steel straps, for pipes of NW 20 to 500, form B |
| DIN 5293 | Eyes for straps and belts |
| DIN 7332 | Eyelets for canvas |
| DIN 7333 | Eyeletts for cardboard labels |
| DIN 16966-2 E1 | Pipe joints and their elements of glass fibre rein forced polyester resins; elbows 90°, form E1 |
| DIN 16966-2 E2 | Pipe joints and their elements of glass fibre rein forced polyester resins; elbows 45°, form E2 |
| DIN 16966-4 S1 | Pipe joints and their elements of glass fibre rein forced polyester resins; nozzles, form S1 |
| DIN 16966-4 S2 | Pipe joints and their elements of glass fibre rein forced polyester resins; nozzles, form S2 |
| DIN 16966-4 T1 | Pipe joints and their elements of glass fibre rein forced polyester resins; tees 90°, form T1 |
| DIN 16966-4 T2 | Pipe joints and their elements of glass fibre rein forced polyester resins; tees 90°, form T2 |
| DIN 16966-5 C1 | Pipe joints and their elements of glass fibre rein forced polyester resins; reducers, form C1 |
| DIN 16966-5 C2 | Pipe joints and their elements of glass fibre rein forced polyester resins; reducers, form C2 |
| DIN 16966-5 C3 | Pipe joints and their elements of glass fibre rein forced polyester resins; reducers, form C3 |
| DIN 16966-5 C4 | Pipe joints and their elements of glass fibre rein forced polyester resins; reducers, form C4 |
| DIN 16966-5 X1 | Pipe joints and their elements of glass fibre rein forced polyester resins; reducers, form X1 |
| DIN 16966-5 X2 | Pipe joints and their elements of glass fibre rein forced polyester resins; reducers, form X2 |
| DIN 16966-5 X3 | Pipe joints and their elements of glass fibre rein forced polyester resins; reducers, form X3 |
| DIN 16966-5 X4 | Pipe joints and their elements of glass fibre rein forced polyester resins; reducers, form X4 |
| DIN 16966-6 B1 | Pipe joints and their elements of glass fibre rein forced polyester resins; adhesive bands, form B1 |
| DIN 16966-6 B2 | Pipe joints and their elements of glass fibre rein forced polyester resins; molded bands, form B2 |
| DIN 16966-6 D | Pipe joints and their elements of glass fibre rein forced polyester resins; gaskets, form D |
| DIN 16966-6 DE | Pipe joints and their elements of glass fibre rein forced polyester resins; gaskets, form DE |
| DIN 16966-6 F1 | Pipe joints and their elements of glass fibre rein forced polyester resins; flanges, form F1 |
| DIN 16966-6 KD | Pipe joints and their elements of glass fibre rein forced polyester resins; gaskets, form KD |
| DIN 16966-6 V3 | Pipe joints and their elements of glass fibre rein forced polyester resins; fixed flanges, form V3 |
| DIN 28120 A | Flanged holders for circular sight glasses without cover, form A |
| DIN 28120 B | Flanged holders for circular sight glasses with cover, form B |
| DIN 28121 AB1 | Circular sight glass fitting with round sight glass plate in force shunt, type A, forms of the flange sealing surface according to DIN EN 1092-1, form B (sealing face) |
| DIN 28121 AC | Circular sight glass fitting with round sight glass plate in force shunt, type A, forms of the flange sealing surface according to DIN EN 1092-1, form C (spring) |
| DIN 28121 AE | Circular sight glass fitting with round sight glass plate in force shunt, type A, forms of the flange sealing surface according to DIN EN 1092-1, form E (ledge) |
| DIN 28121 BB | Circular sight glass fitting with round sight glass plate in force shunt, type B, forms of the flange sealing surface according to DIN EN 1092-1, form B (sealing face) |
| DIN 28121 BE | Circular sight glass fitting with round sight glass plate in force shunt, type B, forms of the flange sealing surface according to DIN EN 1092-1, form E (ledge) |
| DIN 28121 EB | Circular sight glass fitting with round sight glass plate in force shunt, type E, forms of the flange sealing surface according to DIN EN 1092-1, form B (sealing face) |
| DIN 16262 A | PN 6 and PN 16 cocks with adjusting nut and male connection for pressure gauges, form A |
| DIN 16262 B | PN 6 and PN 16 cocks with adjusting nut and male connection for pressure gauges, form B |
| DIN 16270 A | PN 250 and PN 400 valves without test connection for pressure gauges, form A |
| DIN 16270 B | PN 250 and PN 400 valves without test connection for pressure gauges, form B |
| DIN 16271 A | PN 250 and PN 400 valves with test connection for pressure gauges, form A |
| DIN 16271 B | PN 250 and PN 400 valves with test connection for pressure gauges, form B |
| DIN 16272 A | PN 250 and PN 400 valves with blocking test connection for pressure gauges, form A |
| DIN 16272 B | PN 250 and PN 400 valves with blocking test connection for pressure gauges, form B |
| DIN 16282 | Connection spigot for siphons of types B and D (with left-hand thread for clamping sleeve) |
| DIN 16282 | Connection spigot for siphons of types A and C (pressure tapping side) |
| DIN 16282 F | Siphons for horizontal pressure extraction, with welded connection on both sides, form F |
| DIN 16282 A | Water sack pipes for horizontal, form A |
| DIN 16282 B | Water sack pipes for horizontal, form B |
| DIN 16282 G | Siphons for vertical pressure extraction (circular shape), with welded connection on both sides, form G |
| DIN 16282 D | Siphons for vertical pressure extraction (circular shape), with welding connection on the pressure extraction side, form D |
| DIN 16282 C | Siphons for vertical pressure extraction (circular shape), with connection spigot on the pressure extraction side, form C |
| DIN 16282 P | Compact siphon, form P |
| DIN 16282 T | Compact siphon, form T |
| DIN 20042 | Watervalves, nominal pressure 40 |
| DIN 3280-1 A | Valves for domestic water supply PN 10 - Metallic tapered unions - Part 1, Form A with external thread on both sides |
| DIN 3280-1 B | Valves for domestic water supply PN 10 - Metallic tapered unions - Part 1, Form B with internal thread on both sides |
| DIN 3280-1 E | Valves for domestic water supply PN 10 - Metallic tapered unions - Part 1, Form E with hose connection on both sides |
| DIN 3280-2 IG | Valves for domestic water supply PN 10 - Metallic tapered unions - Part 2, Sleeves with internal thread, form IG |
| DIN 3280-2 AG | Valves for domestic water supply PN 10 - Metallic tapered unions - Part 2, Sleeves with external thread, form AG |
| DIN 3280-2 | Valves for domestic water supply PN 10 - Metallic tapered unions - Part 2, Sleeves with hose connection, conical sealing |
| DIN 3280-2 IG | Valves for domestic water supply PN 10 - Metallic tapered unions - Part 2, Tubes with internal thread, conical sealing, form IG |
| DIN 3280-2 AG | Valves for domestic water supply PN 10 - Metallic tapered unions - Part 2, Tubes with external thread, conical sealing, form AG |
| DIN 3280-2 | Valves for domestic water supply PN 10 - Metallic tapered unions - Part 2, Tubes with hose connection, conical sealing |
| DIN 3292 | Nonferrous metal union nuts |
| DIN 3292-1 | Nonferrous metal union nuts |
| DIN 3292-2 | Malleable cast iron union nuts |
| DIN 3352-5 | Steel gate valves with exterior shaft thread |
| DIN 3352-5 I | Steel gate valves with interior shaft thread |
| DIN 3357-1 | Full bore steel ball valves |
| DIN 3502 B | Two-way valves oblique bonnet type PN 10 Y-type valve, form B |
| DIN 3502 C | Two-way valves oblique bonnet type PN 10 Y-type valve, form C |
| DIN 3502 E | Two-way valves oblique bonnet type PN 10 Y-type valve, form E |
| DIN 3502 V | Two-way valves oblique bonnet type PN 10 Y-type valve, form V |
| DIN 3509 VS | Outlets, form VS |
| DIN 3509 VSRB | Outlets, form VSRB |
| DIN 3512 B | Housing, form B |
| DIN 3512 C | Housing, form C |
| DIN 3512 E | Valves, form E |
| DIN 3512 V | Valves, form V |
| DIN 3844 | Valves for heating installations; copper alloy globe valves PN 16 with screwed sockets |
| DIN 7757 20 | Valve cores, form 20 |
| DIN 7757 22 | Core chambers, form 22 |
| DIN 7757 31 | Core chambers, form 31 |
| DIN 7757 33 | Valve cores, form 33 |
| DIN 7757 34.5 | Core chambers, form 34.5 |
| DIN 7757 38 | Valve cores, form 38 |
| DIN 7757 G | Connectors for pressure gauges, form G |
| DIN 7757 R | Valve caps, form R |
| DIN 7757 S | Connectors for pressure gauges, form S |
| DIN 7757 V | Valve extensions, form V |
| DIN 7757 Vg12 | Valve caps, form Vg12 |
| DIN 7757 Vg12-Vg8 | Valve caps, form Vg12-Vg8 |
| DIN 7757 Vg8-A | Valve caps, form Vg8-A |
| DIN 7757 Vg8-B | Valve caps, form Vg8-B |
| DIN 7757 Vg8-C | Valve caps, form Vg8-C |
| DIN 7757 Vg8 EM | Valve caps, form Vg8 EM |
| DIN 7757 VP | Valve extensions, form VP |
| DIN 7757 W | Connectors for pressure gauges, form W |
| DIN 86501 ARS | Valves, screwed bonnet type of gun metal with 24°- connection with port wnd W according to DIN 3861, form ARS |
| DIN 86501 AS | Valves, screwed bonnet type of gun metal with 24°- connection with port wnd W according to DIN 3861, form AS |
| DIN 86501 CRS | Valves, screwed bonnet type of gun metal with 24°- connection with port wnd W according to DIN 3861, form CRS |
| DIN 86501 CS | Valves, screwed bonnet type of gun metal with 24°- connection with port wnd W according to DIN 3861, form CS |
| DIN 86501 DRS | Valves, screwed bonnet type of gun metal with 24°- connection with port wnd W according to DIN 3861, form DRS |
| DIN 86501 DS | Valves, screwed bonnet type of gun metal with 24°- connection with port wnd W according to DIN 3861, form DS |
| DIN 28126 A | DN 125 bow closures, form A, unalloyed steel |
| DIN 28126 B | DN 125 bow closures, form B, rustless steel |
| DIN 28126 C | DN 125 bow closures, form C, unalloyed steel for surface protection |
| DIN 15432 A | Brake discs |
| DIN 15432 B | Brake discs |
| DIN 808 D | Cardan joints, form D |
| DIN 808 E | Cardan joints, form E |
| DIN 115-1 A | Clamp couplings, form A |
| DIN 115-1 AS | Clamp couplings, form AS |
| DIN 115-1 B | Clamp couplings, form B |
| DIN 115-1 BS | Clamp couplings, form BS |
| DIN 115-1 C | Clamp couplings, form C |
| DIN 115-1 CS | Clamp couplings, form CS |
| DIN 115-2 | Ring for clamp couplings |
| DIN 116 A | Flange couplings |
| DIN 116 B | Flange couplings |
| DIN 116 C | Flange couplings |
| DIN 2215 | Classic V-belts |
| DIN 2216 | Finite V-belts |
| DIN 7721-1 | Synchronous belt drives, metric pitch, synchronous belts |
| DIN 7753-1 | Endless narrow V-belt for engineering |
| DIN 7753-3 | Endless narrow V-belts for the automotive industry |
| DIN 7867 | V-ribbed belt |
| DIN 7867 | Wedge rib washers |
| DIN 111 | Flat pulleys |
| DIN 2211-1 SPA | Grooved pulleys for narrow V-belts SPA |
| DIN 2211-1 SPB | Grooved pulleys for narrow V-belts SPB |
| DIN 2211-1 SPC | Grooved pulleys for narrow V-belts SPC |
| DIN 2211-1 SPZ | Grooved pulleys for narrow V-belts SPZ |
| DIN 1142 | Rope clamps for cable end connections |
| DIN 1142 SA | Clamping jaws for wire end connections |
| DIN 1142 SB | Clamping jaws for wire end connections |
| DIN 1142 SC | Collar nuts for wire ends |
| DIN 15062 A | Cranes, sheaves for wire ropes, form A |
| DIN 15062 B | Cranes, sheaves for wire ropes, form B |
| DIN 15062 C | Cranes, sheaves for wire ropes, form C |
| DIN 15062 D | Cranes, sheaves for wire ropes, form D |
| DIN 15315 1 | Cable wedge chassis |
| DIN 15315 2 | Cable wedges |
| DIN 15315 | Wire locks |
| DIN 3052 | Spiral wires 1x7 |
| DIN 3055 FE | Round flexible wires 6x7 with fibre inserts (FE) |
| DIN 3055 SE | Round flexible wires 6x7 with steel inserts (SE) |
| DIN 3060 FE | Round flexible wires 6x19 with fibre inserts (FE) |
| DIN 3060 SE | Round flexible wires 6x19 with steel inserts (SE) |
| DIN 3064 FE | Round flexible wires 6x36 Warrington-Seale with fibre inserts (FE) |
| DIN 3064 SE | Round flexible wires 6x36 Warrington-Seale with steel inserts (SE) |
| DIN 3066 FE | Round flexible wires 6x37 standard with fibre inserts (FE) |
| DIN 3066 SE | Round flexible wires 6x37 standard with steel inserts (SE) |
| DIN 3069 FE | Spiral round flexible wires 18x7, little turn with fiber inserts (FE) |
| DIN 3069 SE | Spiral round flexible wires 18x7, little turn with steel inserts (SE) |
| DIN 3088 A | Block ropes, A-elements |
| DIN 3088 X | Block ropes, X-elements |
| DIN 3090 N | Shaped steel thimbles for wire ropes, type N |
| DIN 3091 | Shaped steel thimbles for wire ropes, type N |
| DIN 3093-1 | Ferrules |
| DIN 46438 | Round copper cable highly flexible |
| DIN 56297 A | Quick links with union nut, form A, with a small opening |
| DIN 56297 B | Quick links with union nut, form B, with a largel opening |
| DIN 65457 | Thimbles of sheet steel |
| DIN 6899 BF | Shaped steel thimbles for wire ropes, type N |
| DIN 71984-2 B | Cables for controls; round strands 1x19, form B |
| DIN 71984-3 C | Cables for controls; sheatings, form C flat wire covers |
| DIN 71984-3 D | Cables for controls; sheatings, form D round wire covers |
| DIN 71984-4 E | Cables for controls; sockets, form E |
| DIN 71984-4 F | Cables for controls; sockets, form F |
| DIN 71984-4 G | Cables for controls; sockets, form G |
| DIN 71985-2 B | Nipples for linkages, solder nipple, form B |
| DIN 71985-2 C | Nipples for linkages, solder nipple, form C |
| DIN 71985-2 D | Nipples for linkages, solder nipple, form D |
| DIN 71989 A | Setscrews, form A |
| DIN 71989 B | Setscrews, form B |
| DIN 71989 C | Adjusting screws, form C, with knurled head without nut |
| DIN 71989 D | Setscrews, form D |
| DIN 741 A | Rope clamps for cable end connections |
| DIN 741 | Rope clamps for cable end connections |
| DIN 741 B | Clips for free ends of wire ropes |
| DIN 39 D | Fixed ball knobs |
| DIN 39 E | Fixed ball knobs |
| DIN 98 D | Revolvable ball knobs |
| DIN 98 E | Revolvable ball knobs |
| DIN 1585 A | Handles |
| DIN 1585 B | Handles |
| DIN 1585 C | Handles |
| DIN 3135 A | Case handles |
| DIN 3135 B | Case handles |
| DIN 3135 E | Case handles |
| DIN 3135 F | Case handles |
| DIN 3136 | Chest handles, salient type |
| DIN 99 K | Ball handles |
| DIN 99 L | Ball handles |
| DIN 99 M | Ball handles |
| DIN 99 N | Ball handles |
| DIN 99 P | Ball handles |
| DIN 99 R | Ball handles |
| DIN 6337 K | Orb handles |
| DIN 6337 L | Orb handles |
| DIN 6337 M | Orb handles |
| DIN 6337 N | Orb handles |
| DIN 6335 A | Cross handles, form A |
| DIN 6335 B | Cross handles, form B |
| DIN 6335 C | Cross handles, form C |
| DIN 6335 D | Cross handles, form D with continuous threaded hole |
| DIN 6335 E | Cross handles, form E |
| DIN 6335 G | Cross handles, form G |
| DIN 6335 H | Cross handles, form H |
| DIN 6335 D | Cross handles, form D with inserted threaded bushes, variant A |
| DIN 6335 D B | Cross handles, form D with inserted threaded bushes, variant B |
| DIN 6335 K | Cross handles, molds made of molding compound, form K with inserted threaded bushes, variant A |
| DIN 6335 K B | Cross handles, molds made of molding compound, form K with inserted threaded bushes, variant B |
| DIN 6335 L | Cross handles, form L |
| DIN 6336 A | Star wheels |
| DIN 6336 B | Star wheels |
| DIN 6336 C | Star wheels |
| DIN 6336 D | Star wheels |
| DIN 6336 E | Star wheels |
| DIN 6336 K | Star wheels |
| DIN 6336 L | Star wheels |
| DIN 3220 | Handwheels, flat type |
| DIN 3670 B | Disc hand wheels, boss without groove |
| DIN 3670 N | Disc hand wheels, boss with groove |
| DIN 388-1 C | Handwheels from plastic with waves |
| DIN 390 B | Handwheel |
| DIN 390 C | Handwheels |
| DIN 5557 AA | Handwheels |
| DIN 5557 C | Handwheels |
| DIN 950 B | Handwheels angulate, form B |
| DIN 950 N | Handwheels angulate, form N |
| DIN 950 V | Handwheels angulate, form V |
| DIN 319 C | Ball knobs, form C |
| DIN 319 E | Ball knobs, form E |
| DIN 319 L | Ball knobs, form L |
| DIN 319 M | Ball knobs, form M |
| DIN 468 D | Crank handles cranked, form D |
| DIN 468 F | Crank handles cranked, form F |
| DIN 469 D | Crank handles straight, form D |
| DIN 469 F | Crank handles straight, form F |
| DIN 403 AA | Knurling wheels with parallel axis of grooves, form AA |
| DIN 403 BL | Left knurling wheels, form BL |
| DIN 403 BR | Right knurling wheels, form BR |
| DIN 403 GE | Left-Right knurling wheels, tops increased, form GE |
| DIN 403 GV | Left-Right knurling wheels, tops deepened, form GV |
| DIN 403 KE | Cross knurling wheels, tops increased, form KE |
| DIN 403 KV | Cross knurling wheels, tops deepened, form KV |
| DIN 46228-1 A | Tubular end-sleeves without plastic sleeve, form A |
| DIN 46228-2 B | Crimp-type end-splices, with and without insulation grip, form B |
| DIN 46228-2 C | Crimp-type end-splices, with and without insulation grip, form C |
| DIN 46228-3 D | Conductor-embracing end-splices, without insulation grip, form D |
| DIN 46228-4 E | Tubular end-sleeves with plastic sleeve, form D |
| DIN 49523 | Gauge-pieces D01, D02, D03, and functional for gauge-piece hand-keys |
| DIN 43579-7 D | Cap |
| DIN 43579-7 Z | Train lighting batteries |
| DIN 72331-1 | Battery terminal for starter battery, screw clamp form A-D |
| DIN 72331-2 | Battery terminal for starter battery, screw clamp form E-H |
| DIN 72332-1 A | Soldering clips form A for positive pole |
| DIN 72332-1 B | Soldering clips form B for negative pole |
| DIN 72332-2 C1 | Soldering clips form C1 for positive pole |
| DIN 72332-2 C2 | Soldering clips form C2 for positive pole |
| DIN 72332-2 D1 | Soldering clips form D1 for negative pole |
| DIN 72332-2 D2 | Soldering clips form D2 for negative pole |
| DIN 46288 A | Connecting washer for conductor junction, form A |
| DIN 46288 B | Connecting washer for conductor junction, form B |
| DIN 72311-15 H4 | Lead storage batteries; starter batteries; monoblocs with basic fastening lugs and their lids, form H4 (with robotic grips) |
| DIN 72311-15 H5 | Lead storage batteries; starter batteries; monoblocs with basic fastening lugs and their lids, form H5 (with robotic grips) |
| DIN 72311-15 H6 | Lead storage batteries; starter batteries; monoblocs with basic fastening lugs and their lids, form H6 (with robotic grips) |
| DIN 72311-15 H60 | Lead storage batteries; starter batteries; monoblocs with basic fastening lugs and their lids, form H60 (without robotic grips) |
| DIN 72311-15 H7 | Lead storage batteries; starter batteries; monoblocs with basic fastening lugs and their lids, form H7 (with robotic grips) |
| DIN 72311-15 H8 | Lead storage batteries; starter batteries; monoblocs with basic fastening lugs and their lids, form H8 (with robotic grips) |
| DIN 72311-15 H80 | Lead storage batteries; starter batteries; monoblocs with basic fastening lugs and their lids, form H80 (without robotic grips) |
| DIN 72311-15 T4 | Lead storage batteries; starter batteries; monoblocs with basic fastening lugs and their lids, form T4 (with robotic grips) |
| DIN 72311-15 T5 | Lead storage batteries; starter batteries; monoblocs with basic fastening lugs and their lids, form T5 (with robotic grips) |
| DIN 72311-15 T6 | Lead storage batteries; starter batteries; monoblocs with basic fastening lugs and their lids, form T6 (with robotic grips) |
| DIN 72311-15 T60 | Lead storage batteries; starter batteries; monoblocs with basic fastening lugs and their lids, form T60 (without robotic grips) |
| DIN 72311-15 T65 | Lead storage batteries; starter batteries; monoblocs with basic fastening lugs and their lids, form T65 (with robotic grips) |
| DIN 72311-15 T7 | Lead storage batteries; starter batteries; monoblocs with basic fastening lugs and their lids, form T7 (with robotic grips) |
| DIN 72311-15 T8 | Lead storage batteries; starter batteries; monoblocs with basic fastening lugs and their lids, form T8 (with robotic grips) |
| DIN 72311-15 T80 | Lead storage batteries; starter batteries; monoblocs with basic fastening lugs and their lids, form T80 (without robotic grips) |
| DIN 48173 1 | Roof anchorage, anchor head clamps |
| DIN 48173 2 | Roof anchorage, brackets |
| DIN 48173 5 | Roof anchorage, Application cones |
| DIN 48173 6 | Roof anchorage, tie rods |
| DIN 48173 7 A | Roof anchorage, base plates without lead strips |
| DIN 48173 7 B | Roof anchorage, base plates with to braze plump slat |
| DIN 48173 8 | Roof anchorage, threaded rings |
| DIN 48173 9 | Roof anchorage, coupling nuts |
| DIN 48173 10 | Roof anchorage, sleeves |
| DIN 48173 12 | Roof anchorage, ball seals |
| DIN 48173 13 | Roof anchorage, seal rings |
| DIN 48173 14 | Roof anchorage, eye screws |
| DIN 89280-2 1 | Glands for cables and cords, adapter an cast und pressed parts, pos. no. 1 |
| DIN 89280-2 2 | Glands for cables and cords, adapter for positive connections, pos. no. 2 |
| DIN 89280-2 3 | Glands for cables and cords, adapter for bolted connections, pos. no. 3 |
| DIN 89280-2 4 | Glands for cables and cords, flat nuts, pos. no. 4 |
| DIN 89280-2 5 | Glands for cables and cords, screw bushings, long, pos. no. 5 |
| DIN 89280-2 6 | Glands for cables and cords, screw bushings, short, pos. no. 6 |
| DIN 46342 A | Flat connections, straight, with mounting hole for push-on contacts |
| DIN 46342 B | Flat connections, 45° offset, with mounting hole for push-on contacts |
| DIN 46342 C | Flat connections, 90° offset, with mounting hole for push-on contacts |
| DIN 46343-1 A | Snap-in tabs for receptacle size 2.8, form A |
| DIN 46343-1 B | Snap-in tabs for receptacle size 2.8, form B |
| DIN 46343-2 A | Snap-in tabs for receptacle size 4.8, form A |
| DIN 46343-2 B | Snap-in tabs for receptacle size 4.8, form B |
| DIN 46343-3 A | Snap-in tabs for receptacle size 6.3, form A |
| DIN 46343-3 B | Snap-in tabs for receptacle size 6.3, form B |
| DIN 46343-4 | Flat connection with snap-in pin for enclosure for push-on contact 9.5 |
| DIN 49073 TA | Isolating material sockets, form TA |
| DIN 49073 TB | Gerätedosen aus Isolierstoff, Form TB |
| DIN 49073 TC | Isolating material sockets, form TC |
| DIN 49073 GA | Metal boxes, form GA |
| DIN 49073 GB | Isolating material sockets, form GB |
| DIN 49073 GC | Isolating material sockets, form GC |
| DIN 49003 A | Elbow |
| DIN 49003 B | Elbow |
| DIN 49020 A | Armored steel tubes with or without socket |
| DIN 49020 AS | Tube |
| DIN 49020 B | Sockets, form B |
| DIN 49020 BS | Sockets, form BS |
| DIN 49016-2 GM | Socket pipes for medium compressive stress |
| DIN 49016-2 KM | Socket elbows for medium compressive stress |
| DIN 49016-2 LM | Socket pipes for hard compressive stress |
| DIN 49016-2 NM | Socket elbows for hard compressive stress |
| DIN 49016-3 GH | Pipes |
| DIN 49016-3 HH | Sockets |
| DIN 49016-3 KH | Elbow |
| DIN 49017-2 GM | Socket pipes for light compressive stress |
| DIN 49017-2 KM | Socket elbow |
| DIN 49018-1 A | Flexible corrugated and inflammable conduits of insulating material for middle pressure load, form A |
| DIN 49018-1 B | Flexible corrugated and inflammable conduits of insulating material for middle pressure load, form B |
| DIN 49018-1 HA | Sockets for middle pressure load, form HA |
| DIN 49018-1 HB | Sockets for light pressure load, form HB |
| DIN 49018-2 | Flexible corrugated and inflammable conduits of insulating material with plain mantle and for heavy pressure load |
| DIN 49018-3 AS CF 105 | Flexible retardant insulating material pipes corrugated |
| DIN 49019-2 A | Flexible non-retardant insulating material pipes |
| DIN 46211 A | Punched cable sockets, for copper conductor |
| DIN 46211 C | Punched cable sockets, for copper conductor |
| DIN 46225 A | Punched claw cable sockets with isolation for isolated wires |
| DIN 46225 B | Punched claw cable sockets with isolation for isolated wires with slot |
| DIN 46230 | Cable sockets for solderless connections, pin form, without isolation, for copper conductors |
| DIN 46231 | Cable sockets for solderless connections, isolated for copper conductors |
| DIN 46234 | Cable sockets for solderless connections, ring form, without isolation, for copper conductors |
| DIN 46235 | Cable sockets for compression connections, cover plate type, for copper conductors |
| DIN 46237 | Crush cable socket for solderless connections, isolated for copper conductors |
| DIN 46245-1 A | Push on contacts with insulating sleeve for plug breadth 2.8 |
| DIN 46245-1 B | Push on contacts with insulating sleeve for plug breadth 2.8 |
| DIN 46245-2 | Receptacles for tabs size 4.8, with insulating sleeve |
| DIN 46245-3 | Receptacles for tabs size 6.3, with insulating sleeve |
| DIN 46247-1 A | Push on contacts without insulating sleeve for plug breadth 2.8 |
| DIN 46247-1 B | Push on contacts without insulating sleeve for plug breadth 2.8 |
| DIN 46247-2 | Push on contacts without insulating sleeve for plug breadth 4.8 |
| DIN 46247-3 | Push on contacts without insulating sleeve for plug breadth 6.3 |
| DIN 46247-4 | Push on contacts without insulating sleeve for plug breadth 9.5 |
| DIN 46329 | Cable sockets for compression connections, ring type, for aluminium conductors |
| DIN 46330-1 A | Short push-in contact without insulation sleeve for plug breadth 2,4 |
| DIN 46340-1 A | Snap-in receptacles for tabs size 2.8, form A |
| DIN 46340-1 B | Snap-in receptacles for tabs size 2.8, form B |
| DIN 46340-3 A | Push on contacts with snap-in pin for boxes for plug breadth 6.3 |
| DIN 46340-3 B | Push on contacts with snap-in pin for boxes for plug breadth 6.3 |
| DIN 46340-4 | Snap-in receptacles for tabs size 9.5 |
| DIN 46340-5 A | Snap-in receptacles for tab size 7.7, form A |
| DIN 46340-5 B | Snap-in receptacles for tab size 7.7, form B |
| DIN 46346 A | Flag receptables for tab size 6.3 |
| DIN 46346 B | Flag receptables for tab size 6.3 |
| DIN 43147-1 A | Dropper clamps for catenary wire: 35 mm² and 70 mm² to 185 mm², form A |
| DIN 43147-2 B | Dropper clamps for catenary wire: 35 mm² and 70 mm² to 95 mm², form B |
| DIN 43147-2 C | Dropper clamps for catenary wire: 120 mm², 150 mm² to 185 mm², form C |
| DIN 43147-3 D | Hanger clamps, slide-Hanger clamps for catenary wire, form D |
| DIN 43147-3 E | Hanger clamps, slide-Hanger clamps for catenary wire, form E |
| DIN 48066-1 AN | Hinges, supporting hinges, form AN |
| DIN 48066-1 AS | Hinges, supporting hinges, form AS |
| DIN 48066-2 BN | Hinges, strain hinges, form BN |
| DIN 48066-2 BS | Hinges, strain hinges, form BS |
| DIN 48074 A | Straight plates and forks, connecting dimensions |
| DIN 48074 B | Straight plates and forks, connecting dimensions |
| DIN 48075-1 | Parallel groove clamps for aluminium stranded conductors |
| DIN 48075-2 | Parallel groove clamps for stranded conductors of cooper and bronce |
| DIN 48078-1 AS | Clevis straps for overhead lines, form AS |
| DIN 48078-1 BN | Clevis straps for overhead lines, form BN |
| DIN 48078-2 CS | Clevis straps for overhead lines, form CS |
| DIN 48078-2 DN | Clevis straps for overhead lines, form DN |
| DIN 46285 | One to three pole terminal strip 380V ~440- |
| DIN 49810-5 | Lamps for firedamp and explosion protected hand lamps (HT) |
| DIN 49812-1 A1 | General lighting service lamps, tubular lampes, form A1 |
| DIN 49812-1 A2 | General lighting service lamps, tubular lampes, form A2 |
| DIN 49812-1 A3 | General lighting service lamps, tubular lampes, form A3 |
| DIN 49812-1 A4 | General lighting service lamps, tubular lampes, form A4 |
| DIN 49812-1 C1 | General lighting service lamps, pigmy lampes, form C1 |
| DIN 49812-1 C2 | General lighting service lamps, pigmy lampes, form C2 |
| DIN 49812-2 B | General lighting service lamps, round bulb lamps, form B |
| DIN 49812-2 D | General lighting service lamps, large candle lamps, form D |
| DIN 49812-3 E | General lighting service lamps, mushroom lamps, form E |
| DIN 49812-4 B | Lamp unit for firedamp and explosion protected signal lamp, form B |
| DIN 49812-4 C1 | Lamp unit for firedamp and explosion protected signal lamp, form C1 |
| DIN 49812-4 C2 | Lamp unit for firedamp and explosion protected signal lamp, form C2 |
| DIN 49846-1 K | Miniature lamps, form K |
| DIN 49846-2 LA | Miniature lamps, form LA |
| DIN 49846-2 LB | Miniature lamps, form LB |
| DIN 49846-3 LC | Miniature lamps, form LC |
| DIN 49846-3 LD | Miniature lamps, form LD |
| DIN 49848-1 B1 | Bicycle incandescent lamps, form B1 |
| DIN 49848-1 B2 | Bicycle incandescent lamps, form B2 |
| DIN 49848-1 B3 | Bicycle incandescent lamps, form B3 |
| DIN 49848-2 HS3 | Bicycle incandescent lamps, form HS3 |
| DIN 49852 A | Fluorescent tubes and light bulbs for gauge aims, form A |
| DIN 49852 B | Fluorescent tubes and light bulbs for gauge aims, form B |
| DIN 72601-3 E | Lamps for road motor vehicle single filament bulbs for headlamps |
| DIN 72601-3 Q | Lamps for road motor vehicle single filament bulbs for headlamps |
| DIN 72601-4 F | Lamps for road vehicles, motor vehicle lamps up to 15W for signal and other lamps |
| DIN 72601-4 H | Lamps for road vehicles, motor vehicle lamps up to 15W for signal and other lamps |
| DIN 72601-4 J | Lamps for road vehicles, motor vehicle lamps up to 15W for signal and other lamps |
| DIN 72601-4 K | Lamps for road vehicles, motor vehicle lamps up to 15W for signal and other lamps |
| DIN 72601-6 K | Lamps for road motor vehicles single filament lamps for signal lamps |
| DIN 72601-6 R | Lamps for road motor vehicles single filament lamps for signal lamps |
| DIN 72601-6 U | Lamps for road motor vehicles single filament lamps for signal lamps |
| DIN 72601-9 | Motorcar lamps with socket W2 x 4,6d |
| DIN 47705 | PVC screened and sheathed cable NYM |
| DIN 47726 | PVC cabling wire 05V, fine wired |
| DIN 47727 | PVC-conductor 07V, fine wired |
| DIN 47728 | Rubber hose 05RR und 05RRT |
| DIN 47729 | Rubber hose 05RN |
| DIN 47730 | Rubber hose 07RN |
| DIN 72551-6 A | Low voltage circuit type A |
| DIN 72551-6 B | Low voltage circuit type B |
| DIN 49500 | Line safety switches 6 to 25 A 415~ and 250V- for screw-in in fuse base D II |
| DIN 41496 Q | Soldering lugs, form Q |
| DIN 41496 R | Soldering lugs, form R |
| DIN 41496 S | Soldering lugs, form S |
| DIN 41496 A1 | Solder lugs without rotary protection form A1 |
| DIN 41496 A2 | Solder lugs without rotary protection form A2 |
| DIN 41496 A3 | Solder lugs without rotary protection form A3 |
| DIN 41496 B1 | Solder lugs without rotary protection form B1 |
| DIN 41496 B2 | Solder lugs without rotary protection form B2 |
| DIN 41496 B3 | Solder lugs without rotary protection form B3 |
| DIN 41496 J2 | Solder lugs for through plug connection form J2 |
| DIN 41496 K2 | Solder lugs for through plug connection form K2 |
| DIN 41496 L2 | Solder lugs for plug-in connection form L2 |
| DIN 41496 U1 | Solder lugs with rivet shank form U1 |
| DIN 41496 U2 | Solder lugs with rivet shank form U2 |
| DIN 41496 U3 | Solder lugs with rivet shank form U3 |
| DIN 41496 V1 | Solder lugs with rivet shank form V1 |
| DIN 41496 V2 | Solder lugs with rivet shank form V2 |
| DIN 41496 V3 | Solder lugs with rivet shank form V3 |
| DIN 41496 M1 | Solder pins with rivet collar (rolled from sheet) form M1 |
| DIN 41496 N1 | Solder pins with flange (rolled from sheet) form N1 |
| DIN 41496 W2 | Solder pins with collar (rolled from sheet) form W2 |
| DIN 72333-3 | Tapered battery terminal post connector, ground braiding |
| DIN 72333-3 A1 | Tapered battery terminal post connector, ground strap, form A1 without end clamp |
| DIN 72333-3 A2 | Tapered battery terminal post connector, ground strap, form A2 with end clamp |
| DIN 72333-3 B1 | Tapered battery terminal post connector, ground strap, form B1 without end clamp |
| DIN 72333-3 B2 | Tapered battery terminal post connector, ground strap, form B2 with end clamp |
| DIN 72333-3 C1 | Tapered battery terminal post connector, ground strap, form C1 with cable socket |
| DIN 72333-3 C2 | Tapered battery terminal post connector, ground strap, form C1 with claw cable socket |
| DIN 49012 G | Metal tubes (without plastic cladding and without metal netting) |
| DIN 49012 H | Metal tubes with retardant plastic cladding |
| DIN 49012 I | Metal tubes with plastic cladding |
| DIN 49012 K | Metal tubes with metal netting |
| DIN 49012 L | Metal tubes with retardant plastic cladding and metal netting |
| DIN 49012 M | Metal tubes with plastic cladding and metal netting |
| DIN 43693 | Position switches with follower flat construction, enclosed |
| DIN 43697 D | Serial position switches |
| DIN 42801 | Connecting bolts for voltage equalizing cable |
| DIN 43234 A | Interruptors for trains and vehicles form A |
| DIN 43234 B | Interruptors for trains and vehicles form B |
| DIN 41569 | G-fuses link 3 kV non-polarised |
| DIN 41570 | Device fuse |
| DIN 41571-2 | Cartridge fuse links 250 V, interchangeable, medium time-lag (M) |
| DIN 41571-3 | G-fuses link 250 V non-polarised, slow (T) |
| DIN 41576-2 | G-fuse link with signaling device 250 V non-polarised, medium slow (M) |
| DIN 41577-1 | G-fuse link with signaling device 250 V polarised, quick (F) |
| DIN 41577-2 | Indicating fuse links 250 V, non interchangeable, medium time-lag (M) |
| DIN 41672 | G-fuse switch 6A 250 V with screw cap |
| DIN 41676 A | G-screw-plugs without window without slot |
| DIN 41676 AS | G-screw-plugs without window with slot |
| DIN 41676 B | G-screw-plugs with window |
| DIN 41676 BPL | G-screw-plugs with window and seal holes |
| DIN 41686 | G-fuse link 500 V non-polarised, medium slow (M), quick (F) |
| DIN 43560-1 A | Band fuse links 80 V, form A open |
| DIN 43560-1 AN | Band fuse links 80 V, form AN open |
| DIN 43560-1 B | Band fuse links 80 V, form B closed |
| DIN 43560-1 BN | Band fuse links 80 V, form BN closed |
| DIN 49329 | D-Fuse-base for forefront connection, D IV 100A 750V |
| DIN 49360-1 | D-Screw plug E16 25A 500V |
| DIN 49511 | D-Fuse base for forefront connection, D IV H 100A 500V |
| DIN 49516 DP | Screw-in gage ring and sleeve socket for D-fuses D II, D III, D IV H |
| DIN 49516 P | Gauge ring key for D-screw and D-bush, screw-in D II, D III, D IV H |
| DIN 49522 | D-Fuse link; D , D 02, D 03, ~400V-250V |
| DIN 49525-1 | D-Screw plugs D 01,D 02,D 03, 380 V |
| DIN 72581-1 A | Fuses for small stress strain |
| DIN 72581-2 B | Fuses for small stress strain |
| DIN 72581-3 C | Fuses for small stress strain |
| DIN 72581-3 E | Fuses for small stress strain |
| DIN 72581-3 F | Fuses for small stress strain |
| DIN 49447 A1 | On-Wall receptacles, form A1 with closed fixing holes |
| DIN 49447 A2 | On-Wall receptacles and plug sockets, form A2 with open fixing holes |
| DIN 49447 B1 | In-wall receptacles, form B1 with closed mounting holes |
| DIN 49447 B2 | In-wall receptacles, form B2 with open mounting holes |
| DIN 41617-2 | Contact gauges D |
| DIN 41617-2 LF | Multipole connector gauges LF |
| DIN 41617-2 LS | Strip gauges LS |
| DIN 41617-2 P | Test boards |
| DIN 41620-1 A | Connectors for printed circuits, multipoint socket connector without fixing beginning |
| DIN 41620-1 B | Connectors for printed circuits, multipoint socket connector with fixing beginning |
| DIN 41622 A | Multipol connectors |
| DIN 41622 B | Multipol connectors |
| DIN 41652-6 F | Multipol connectors |
| DIN 41652-6 S | Strips |
| DIN 43589-1 | Female connectors with contact bushing |
| DIN 43589-1 B | Male connector with contact pins |
| DIN 43650-1 A | Plug connectors, square type, contact boxes, form A |
| DIN 43650-1 A | Plug connectors, square type, connectors, form A |
| DIN 43650-1 B | Plug connectors, square type, contact boxes, form B |
| DIN 43650-1 B | Plug connectors, square type, connectors, form B |
| DIN 65167 | Plug-in relays; DC 28 V, two-and four pole; 5 Amp; polarized, monostable |
| DIN 43670 | Bus bars of aluminium with square cross-section |
| DIN 43670 | Bus bars of aluminium with circle cross-section |
| DIN 43670 | Bus bars of aluminium with circle ring cross-section |
| DIN 43670-4 | Bus bars of aluminium with U-cross-section |
| DIN 43675-2 TP 78-120 | Connectors for connecting bolt, applicable up to 6300 A |
| DIN 43675-2 TP 78-180 | Connectors for connecting bolt, applicable up to 8000 A |
| DIN 42553 D | Filling tube D |
| DIN 42553 E | Breather with snow guard E |
| DIN 46341-1 A | Connectors without insulating sleeve for copper conductors form A |
| DIN 46341-1 B | Connectors without insulating sleeve for copper conductors form B |
| DIN 48085-1 | Full tension compression joints for copper conductors |
| DIN 48085-2 | Full tension compression joints for aluminium conductors |
| DIN 48085-3 | Full tension compression joints for aluminium-steel conductors |
| DIN 72586 A | Line connectors, 2- to 7-pole for wire profile up to 10 mm² |
| DIN 72586 B | Line connectors, 12-pole for wire profile up to 6 mm² |
| DIN 72586 C | Line connectors, 12-pole with flat plugs |
| DIN 43161 A | Pins for overhead equipment |
| DIN 41307-2 L | Accessory parts, fixing angles for types M, EI und UI, form L |
| DIN 41307-2 W | Accessory parts, fixing angles for types M, EI und UI, form W |
| DIN 48073 N | Connecting pin, with disk |
| DIN 48073 S | Connecting pin |
| DIN 34110 | R-rings |
| DIN 71401-1 | Drain cocks for internal combustion engines (not for new constructions), form A |
| DIN 71401-2 C | Drain valves for internal combustion engines |
| DIN 71555 | Motor vehicles – Pipe clips for exhaust systems |
| DIN 73365-3 A | Injection Pumps for Diesel Engines, union nuts, form A |
| DIN 73365-3 B | Injection Pumps for Diesel Engines, pressure sleeves, form B |
| DIN 73365-3 C | Injection Pumps for Diesel Engines, sealing ferrules, form C |
| DIN 73365-3 D | Injection Pumps for Diesel Engines, soldered sealing ferrules, form D |
| DIN 73365-3 E | Injection Pumps for Diesel Engines, unions, form E |
| DIN 73365-3 L | Injection Pumps for Diesel Engines, pressure pipe connections, form L |
| DIN 73365-3 R | Injection Pumps for Diesel Engines, pressure pipe connections, form R |
| DIN 73378 | Polyamide tubing for motor vehicles |
| DIN 73379-1 TYPE 1 | Fuel hoses in tank |
| DIN 73379-1 TYPE 2 | Fuel hoses with medium permeation |
| DIN 73379-1 TYPE 3 | Fuel hoses with permeation |
| DIN 73400 gasket | Bajonette-sealings, gaskets |
| DIN 73400 sealing cap | Bayonet-sealings, sealing caps |
| DIN 73411-2 | Hose elbow |
| DIN 74053-1 50 A | Drawbar eyes 50, with sleeve, form A with welding end |
| DIN 74053-1 50 B | Drawbar eyes 50, with sleeve, form B with screw end |
| DIN 74053-1 Sleeve 50 | Sleeves 50 |
| DIN 74053-1 50 D1 | Drawbar eyes 50, with sleeve, form D1 with 8-hole flange |
| DIN 74054-1 40 A | Drawbar eyes 40, with sleeve, form A with welding end |
| DIN 74054 40 B | Drawbar eyes 40, with sleeve, form B with screw end |
| DIN 74054-1 Sleeve 40 | Sleeves 40 |
| DIN 74054-1 40 D | Drawbar eyes 40, with sleeve, form D with 8 flange |
| DIN 74233-1 ES | Fittings for brake pipes, male fittings for brake pipes, form ES |
| DIN 74233-1 FS | Fittings for brake pipes, male fittings for brake pipes, form FS |
| DIN 74233-2 EM | Fittings for brake pipes, union nuts for brake pipes, form EM |
| DIN 74233-2 FM | Fittings for brake pipes, union nuts for brake pipes, form FM |
| DIN 74234 B | Brake pipes, form B |
| DIN 74234 C | Brake pipes, form C |
| DIN 74234 D | Brake pipes, form D |
| DIN 74234 E | Flares, form E |
| DIN 74234 | Brake pipes forms B, C or D with flare form E |
| DIN 74234 F | Flares, form F |
| DIN 74310-2 | Hoses |
| DIN 74324-1 R | Thermoplastic tubing |
| DIN 26512 | Shields hook |
| DIN 37081 A | Supports with hole |
| DIN 37081 C | Supports with pin |
| DIN 37081 D | Spring plate |
| DIN 37081 E | Spring plate |
| DIN 37082 B | Compression springs |
| DIN 37082 C | Spring bolt |
| DIN 26020 1 | Toggle nuts |
| DIN 26020 5 | Gaskets |
| DIN 26020 6 | Eye bolts |
| DIN 26020 7 | Dome cup |
| DIN 26020 B | Dome, form B |
| DIN 26029-2 B | Vent holes and drain plugs, form B |
| DIN 25106 A | Rosettes, form A |
| DIN 25106 B | Rosettes, form B |
| DIN 20506 A | Clamping plates for securing rails onto steel supports, form A |
| DIN 20506 B | Clamping plates for securing rails onto steel supports, form B |
| DIN 1595 B | Knobs, form B |
| DIN 1595 C | Knobs, form C |
| DIN 1595 D | Knobs, form D |
| DIN 1595 H | Knob screws, form H |
| DIN 1595 J | Coat buttons, form J |
| DIN 25109-2 3 | Housings |
| DIN 25109-2 4 | Labyrinth rings |
| DIN 25109-2 5 | Gaskets |
| DIN 25109-2 6 | Spacer washers |
| DIN 25109-2 7 | Axle journals |
| DIN 25109-2 8 | Axle journals |
| DIN 25109-2 9 | Axle journals |
| DIN 25109-2 10 | Axle journals |
| DIN 25109-2 11 | Slotted nuts |
| DIN 25109-2 13 | Retaining elements |
| DIN 25109-2 14 | Retaining elements |
| DIN 25109-2 15 | Retaining elements |
| DIN 25109-2 16 | Retaining elements |
| DIN 25109-2 21 | Cap |
| DIN 25109-2 25 | Cap |
| DIN 25109-2 28 | Gasket |
| DIN 25074 1 | Hinges |
| DIN 25074 2 | Sleeves |
| DIN 25074 3 | Bolt |
| DIN 25074 A | Door hinges, complete |
| DIN 34016 A | Spring plates for spring bracket, form A |
| DIN 34016 B | Spring plates for spring bracket, form B |
| DIN 4621 A | Alignment clips, form A |
| DIN 4621 B | Alignment clips, form B |
| DIN 4621 C | Alignment clips, form C |
| DIN 4621 CS | Alignment clips, form CS |
| DIN 4621 D | Alignment clips, form D |
| DIN 4621 E | Alignment clips, form E |
| DIN 5543 A | Plate springs, spring plate |
| DIN 5543 B | Plate springs, spring plate |
| DIN 5543 C | Plate springs, spring plate |
| DIN 5543 D | Plate springs, spring plate |
| DIN 5543 E | Plate springs, spring plate |
| DIN 5543 F | Plate springs, spring plate |
| DIN 95363 A | Elastomer mounts, stud mounts, form A |
| DIN 95363 B | Elastomer mounts, stud mounts, form B |
| DIN 95363 C | Elastomer mounts, stud mounts, form C |
| DIN 95363 D | Elastomer mounts, stud mounts, form D |
| DIN 95363 E | Elastomer mounts, stud mounts, form E |
| DIN 95363 F | Elastomer mounts, stud mounts, form F |
| DIN 95364 A | Elastomer mounts, buffer, form A |
| DIN 95364 B | Elastomer mounts, buffer, form B |
| DIN 95364 C | Elastomer mounts, buffer, form C |
| DIN 95364 D | Elastomer mounts, buffer, form D |
| DIN 95364 E | Elastomer mounts, buffer, form E |
| DIN 95364 F | Elastomer mounts, buffer, form F |
| DIN 95364 G | Elastomer mounts, buffer, form G |
| DIN 2093 | Disc springs |
| DIN 11023 | Linch pin |
| DIN 11024 | Spring cotter |
| DIN 2098-1 | Zylindrische Schraubenfedern aus runden Draehten,_x000D_ Baugroessen fuer kaltgeformte Druckfedern ab 0,5 mm Drahtdurchmesser |
| DIN 2098-2 | Zylindrische Schraubenfedern aus runden Draehten,_x000D_ Baugroessen fuer kaltgeformte Druckfedern unter 0,5 mm Drahtdurchmesser |
| DIN 48063-1 VN | Clip pins, form VN |
| DIN 48063-1 W | Clips, form W |
| DIN 1016 | Hot-rolled strip and hot rolled sheet |
| DIN 1543 | Steel plates above 4.75 mm (heavy plate) |
| DIN 1544 | Cold rolled steel strip |
| DIN 1623-2 | Cold rolled bands and sheets |
| DIN 1751 | Sheet of wrought copper and copper alloys |
| DIN 1783 | Sheets and strips of aluminium and aluminium alloy |
| DIN 59220 | Hot-rolled sheet metal with patterns |
| DIN 59382 | Cold rolled bands and sheets, rust-resistant steels |
| DIN 59605 W2 | Embossed sheet of wrought aluminium alloys, form W2 |
| DIN 59605 W5 | Embossed sheet of wrought aluminium alloys, form W5 |
| DIN 59740 | Blank sheets or metal strip of nickel and nickel forgeable alloy hot-rolled |
| DIN 59745 | Blank sheets or metal strip of nickel and nickel forgeable alloy cold-rolled |
| DIN 1732-1 | Welding filler metals for aluminium and aluminium alloys |
| DIN 2076 | Drawn round springs wires |
| DIN 2077 | Spring steel, round, hot-rolled |
| DIN 4189-1 | Woven wire cloth made of steel, stainles steel or non-ferrous metals |
| DIN 59781 | Round wire of wrought nickel and nickel alloy |
| DIN 65471 | Aerospace; filler metals for welding titanium and titanium alloys; filler rods and filler wires |
| DIN 791 | Expanded metal |
| DIN 16977 | Polyacetale (POM) sheets |
| DIN 16984 | Polyamid (PA) sheets |
| DIN 16986 | Thermoplastics flats |
| DIN 7712 | Ebonite sheets |
| DIN 7713 | Ebonite bars of round section |
| DIN 24041 Rv | Perforated plates, form Rv |
| DIN 24041 Rd | Perforated plates, form Rd |
| DIN 24041 Rg | Perforated plates, form Rg |
| DIN 24041 Qv | Perforated plates, form Qv |
| DIN 24041 Qd | Perforated plates, form Qd |
| DIN 24041 Qg | Perforated plates, form Qg |
| DIN 24041 Lv | Perforated plates, form Lv |
| DIN 24041 Lg | Perforated plates, form Lg |
| DIN 24041 Lge | Perforated plates, form Lge |
| DIN 24041 SKv | Perforated plates, form SKv |
| DIN 5517-1 | Semiproducts for railway vehicles- Bars, profiles and sheet of wrought aluminium alloys |
| DIN 5517-1 | Semiproducts for railway vehicles- Bars, profiles and sheet of wrought aluminium alloys |
| DIN 5517-1 | Semiproducts for railway vehicles- Bars, profiles and sheet of wrought aluminium alloys |
| DIN 5518 A | Profiles, form A |
| DIN 5518 B | Profiles, form B |
| DIN 5518 C | Profiles, form C |
| DIN 5518 D | Profiles, form D |
| DIN 5518 E | Profiles, form E |
| DIN 5518 F | Profiles, form F |
| DIN 5518 G | Profiles, form G |
| DIN 5518 H | Profiles, form H |
| DIN 5518 J | Profiles, form J |
| DIN 5518 K | Profiles, form K |
| DIN 5518 L | Profiles, form L |
| DIN 5518 M | Profiles, form M |
| DIN 5518 N | Profiles, form N |
| DIN 5518 O | Profiles, form O |
| DIN 5518 P | Profiles, form P |
| DIN 5518 Q | Profiles, form Q |
| DIN 5518 R | Profiles, form R |
| DIN 5518 S | Profiles, form S |
| DIN 5518 T | Profiles, form T |
| DIN 59413 C | Cold rolled steel sections, permissible tolerances of dimensions, form and weight, form C |
| DIN 59413 Hut | Cold rolled steel sections, permissible tolerances of dimensions, form and weight, form Hut |
| DIN 59413 L | Cold rolled steel sections, permissible tolerances of dimensions, form and weight, form L |
| DIN 59413 U | Cold rolled steel sections, permissible tolerances of dimensions, form and weight, form U |
| DIN 59413 Z | Cold rolled steel sections, permissible tolerances of dimensions, form and weight, form Z |
| DIN 9714 | Aluminium and Wrought Aluminium Alloy. Extruded channel sections, edges rounded |
| DIN 16893 | Crosslinked Polyethylene (PE-X) pipes |
| DIN 16982 | Polyamid tubes of circular cross-section (PA) |
| DIN 16983 | Hollow rods of circular cross-section of polyamide (PA) |
| DIN 1755-2 | Tubes of wrought copper alloys, seamless drawn, preferred dimensions for general purposes |
| DIN 1786 | Copper tubes for plumbing |
| DIN 1795 | Round tubes of wrought aluminium and aluminium alloys |
| DIN 2394-1 | As-welded and sized precision steel tubes |
| DIN 49023 AS | Flexible steel pipes corrugated for high pressure demands |
| DIN 5517-1 | Semiproducts for railway vehicles- Bars, profiles and sheet of wrought aluminium alloys |
| DIN 59755 | Tubes of wrought nickel and nickel alloy, cold worked |
| DIN 8079 | Chlorinated polyvinyl chloride (PCC-C) pipes |
| DIN 9107 | Round tubes of wrought aluminium and aluminium alloys |
| DIN 16980 | Thermoplastics rods |
| DIN 1756 | Round rods of wrought copper and copper alloys |
| DIN 4620 | Spring steel, hot-rolled for layered leaf springs |
| DIN 4964-1 A | Wallower of high-speed steel with rotund cross section |
| DIN 4964-1 B | Wallower of high-speed steel with square cross section |
| DIN 4964-1 C | High-speed steel tool holder bits with triangular cross-section |
| DIN 4964-1 D | Wallower of high-speed steel with rectangle cross section |
| DIN 4964-1 E | Wallower of high-speed steel with trapeze cross section |
| DIN 5517-1 | Semiproducts for railway vehicles- Bars, profiles and sheet of wrought aluminium alloys |
| DIN 5517-1 | Semiproducts for railway vehicles- Bars, profiles and sheet of wrought aluminium alloys |
| DIN 5517-1 | Semiproducts for railway vehicles- Bars, profiles and sheet of wrought aluminium alloys |
| DIN 5517-1 | Semiproducts for railway vehicles- Bars, profiles and sheet of wrought aluminium alloys |
| DIN 59760 | Round rods of nickel and nickel forging alloy, hot roles |
| DIN 59761 | Square rods of nickel and nickel forging alloy, hot rolled |
| DIN 59762 | Hexagonal bars of wrought nickel and nickel alloys |
| DIN 59763 | Rectangle rods of nickel and nickel forging alloy, hot rolled |
| DIN 59765 | Round rods of nickel and nickel forging alloy, pulled |
| DIN 59767 | Hexagonal rods of nickel and nickel forging alloy, pulled |
| DIN 59768 | Rectangle rods of nickel and nickel forging alloy, pulled, with sharp edges |
| DIN 7527-6 A | Steel forgings, forged free form rod |
| DIN 7527-6 B | Steel forgings, forged free form, square rods |
| DIN 7527-6 C | Steel forgings, forged free form, hexagon rods |
| DIN 7527-6 D | Steel forgings, forged free form, octagon rods |
| DIN 7527-6 E | Steel forgings, forged free form, flat rods |
| DIN 1013-1 | Hot-rolled rounds for general purposes, part 1 |
| DIN 1013-2 | Hot-rolled rounds for general purposes, part 2 |
| DIN 1014-1 | Hot-rolled squares for general purposes, part 1 |
| DIN 1014-2 | Hot-rolled squares for general purposes, part 2 |
| DIN 1015 | Hot-rolled hexagons |
| DIN 1017-1 | Hot-rolled flats for general purposes, sheet 1 |
| DIN 1017-2 | Hot rolled flats for special application, sheet 2 |
| DIN 1018 | Hot rolled half-rounds and flat half-ovals |
| DIN 1019 | Hot-rolled bulb flats |
| DIN 1022 | Hot-rolled square root equal angles (LS-steel) |
| DIN 174 | Flat steel |
| DIN 175 | Polished round steel |
| DIN 176 | Bright hexagon steel |
| DIN 177 | Steel wire, cold drawn |
| DIN 178 | Square steel |
| DIN 668 | Round steel |
| DIN 669 | Round steel shafts |
| DIN 670 | Round steel |
| DIN 671 | Round steel |
| DIN 24556 L | Fluidpower; clavis bracket with pivot pin and locking plate |
| DIN 24556 B | Fluidpower; clavis bracket with pivot pin and locking plate |
| DIN 24556 A | Fluidpower; clavis bracket with pivot pin and locking plate |
| DIN 711 (eS) | Thrust ball bearings, single direction, slick case washer |
| DIN 711 (kS) | Thrust ball bearings, single direction, round case washer |
| DIN 715 | Thrust ball bearings, double dicrection |
| DIN 722 | Thrust cylindrical roller bearings, single direction |
| DIN 728 | Single direction self-aligning thrust bearings with asymmetric rollers |
| DIN 711 (eS) | Thrust ball bearings, double dicrection (simplified model) |
| DIN 715 | Thrust ball bearings, double dicrection (simplified model) |
| DIN 722 | Thrust cylindrical roller bearings, single direction (simplified model) |
| DIN 728 | Single direction self-aligning thrust bearings with asymmetric rollers (simplified model) |
| DIN 715 (ks) | Bearings with crowned housing washers and washers |
| DIN 715 (ks) v | Bearings with crowned housing washers and washers |
| DIN 720 | Tapered roller bearing |
| DIN 720 | Tapered roller bearing |
| DIN 617 NA | Needle roller bearings with cage - Dimensions series 48, 49 and 69 - Unsealed bearings with inner ring |
| DIN 617 RNA | Needle roller bearings with cage - Dimensions series 48, 49 and 69 - Unsealed bearings without inner ring |
| DIN 618 HK | Needle roller bearings with cage, sealed |
| DIN 618 BK | Needle roller bearings, drawn cups with closed ends with cage, sealed |
| DIN 618 HK | Needle roller bearings, drawn cups with open ends with cage, sealed |
| DIN 5402-3 A | Needle rollers, form A |
| DIN 5402-3 B | Needle rollers, form B |
| DIN 5405-1 | Needle roller and cage assemblies |
| DIN 5405-2 | Axial-needle wreaths |
| DIN 5405-3 | Needle roller bearings, thrust washers |
| DIN 5429-2 NKIA | Needle angular contact ball bearings |
| DIN 5429-1 NKX | Needle axial cylindrical bearings without protective cap |
| DIN 5429-1 NKX-Z | Needle axial cylindrical bearings with protective cap |
| DIN 5429-1 NKXR | Needle axial cylindrical bearings without protective cap |
| DIN 5429-1 NKXR-Z | Needle axial cylindrical bearings with protective cap |
| DIN 617 NA-ZW | Needle roller bearings with cage - Dimensions series 69 - Unsealed bearings with inner ring |
| DIN 617 RNA-ZW | Needle roller bearings with cage - Dimensions series 69 - Unsealed bearings without inner ring |
| DIN 617 NA-RS | Needle roller bearings with cage - Dimensions series 49 - Sealed bearings with inner ring |
| DIN 617 RNA-RS | Needle roller bearings with cage - Dimensions series 49 - Sealed bearings without inner ring |
| DIN 617 NA-RS | Needle roller bearings with cage - Dimensions series 49 - Sealed bearings with inner ring (simplified model) |
| DIN 617 NA | Needle roller bearings with cage - Dimensions series 48, 49 and 69 - Unsealed bearings with inner ring (simplified model) |
| DIN 617 NA-ZW | Needle roller bearings with cage - Dimensions series 69 - Unsealed bearings with inner ring (simplified model) |
| DIN 617 RNA | Needle roller bearings with cage - Dimensions series 48, 49 and 69 - Unsealed bearings without inner ring (simplified model) |
| DIN 617 RNA-RS | Needle roller bearings with cage - Dimensions series 49 - Sealed bearings without inner ring (simplified model) |
| DIN 617 NA-ZW | Needle roller bearings with cage - Dimensions series 69 - Unsealed bearings with inner ring (simplified model) |
| DIN 618 HK | Needle roller bearings with cage, sealed (simplified model) |
| DIN 618 BK | Needle roller bearings, drawn cups with closed ends with cage, sealed (simplified model) |
| DIN 618 HK | Needle roller bearings, drawn cups with open ends with cage, sealed (simplified model) |
| DIN 5405-2 | Axial-needle wreaths (simplified model) |
| DIN 5405-1 | Needle roller bearings, Needle roller and cage assemblies (simplified model) |
| DIN 5429-2 NKIA | Needle angular contact ball bearings (simplified model) |
| DIN 5429-1 NKX | Needle axial ball bearings without protective cap (simplified model) |
| DIN 5429-1 NKX-Z | Needle axial ball bearings with protective cap (simplified model) |
| DIN 5429-1 NKXR | Needle-Axial cylinder roller bearings without protective cap (simplified model) |
| DIN 5429-1 NKXR-Z | Needle-axial cylinder roller bearings with protective cap (simplified model) |
| DIN 615 | Magneto bearing |
| DIN 625-1 | Radial deep groove ball bearings, single row |
| DIN 625-3 | Radial deep groove ball bearings, double row |
| DIN 625-4 | Rolling bearings, radial deep groove ball bearings, with flanged outer ring |
| DIN 626-1 YEL | Insert bearing |
| DIN 626-1 YEN | Insert bearing |
| DIN 628-1 | Angular contact radial ball bearings, single row |
| DIN 628-3 | Angular contact radial ball bearings, double row, with cage |
| DIN 628-4 | Radial-Schraegkugellager, einreihig, nicht selbsthaltend,_x000D_ Vierpunktlager, mit geteiltem Innenring |
| DIN 628-5 | Angular contact radial ball bearings, double row, with spacer balls |
| DIN 628-6 | Rolling bearings, angular contact radial ball bearings, single row, conctact angle 15° and 25° |
| DIN 630 | Self aligning ball bearings, double row, cylindrical bore |
| DIN 630 K | Self aligning ball bearings, double row, conus bore (1:12) |
| DIN 630 2RS | Self aligning ball bearings, double row, cylindrical bore |
| DIN 630 K-2RS | Self aligning ball bearings, double row, conus bore (1:12) |
| DIN 635-1 | Self aligning roller bearings, single row |
| DIN 635-1 K | Self aligning roller bearings, single row |
| DIN 635-2 | Radial spherical roller bearings - Part 2: Double row with cylindrical bore |
| DIN 635-2 K | Radial spherical roller bearings - Part 2: Double row with tapered bore (1:12) |
| DIN 635-2 K30 | Radial spherical roller bearings - Part 2: Double row with tapered bore (1:30) |
| DIN 5412-1 HJ | Cylindrical roller bearings, separate thrust collars |
| DIN 5412-1 N | Cylindrical roller bearings, single row, N |
| DIN 5412-1 NJ | Cylindrical roller bearings, single row, NJ |
| DIN 5412-1 NU | Cylindrical roller bearings, single row, NU |
| DIN 5412-1 NUP | Cylindrical roller bearings, single row, NUP |
| DIN 5412-1 RNU | Cylindrical roller bearings, single row, RNU |
| DIN 5412-4 NN | Cylindrical roller bearings, double row, NN |
| DIN 5412-4 NNK | Cylindrical roller bearings, double row, NNK |
| DIN 5412-4 NNU | Cylindrical roller bearings, double row, NNU |
| DIN 5412-4 NNUK | Cylindrical roller bearings, double row, NNUK |
| DIN 615 | Magneto bearing |
| DIN 625-1 N | Radial deep groove ball bearings, single row (simplified model) |
| DIN 625-1 | Radial deep groove ball bearings, single row (simplified model) |
| DIN 625-3 | Radial deep groove ball bearings, double row (simplified model) |
| DIN 625-4 | Rolling bearings, radial deep groove ball bearings, with flanged outer ring (simplified model) |
| DIN 626-1 YEL | Insert bearing |
| DIN 626-1 YEN | Insert bearing |
| DIN 628-1 | Angular contact radial ball bearings, single row (simplified model) |
| DIN 628-3 | Angular contact radial ball bearings, double row (simplified model) |
| DIN 628-4 | Radial-Schraegkugellager, einreihig, nicht selbsthaltend,_x000D_ Vierpunktlager, mit geteiltem Innenring |
| DIN 628-5 | Angular contact radial ball bearings, double row, with spacer balls (simplified model) |
| DIN 5412-1 HJ | Cylindrical roller bearings, separate thrust collars (simplified model) |
| DIN 5412-1 N | Cylindrical roller bearings, single row, with cage, type N (simplified model) |
| DIN 5412-1 NJ | Cylindrical roller bearings, single row, with cage, type NJ (simplified model) |
| DIN 5412-1 NU | Cylindrical roller bearings, single row, with cage, type NU (simplified model) |
| DIN 5412-1 NUP | Cylindrical roller bearings, single row, with cage, type NUP (simplified model) |
| DIN 5412-1 RNU | Cylindrical roller bearings, single row, with cage, type RNU (simplified model) |
| DIN 5412-4 NN | Cylindrical roller bearings, double row, with cage, increased accuracy (simplified model) |
| DIN 5412-4 NNK | Cylindrical roller bearings, double row, NNK (simplified model) |
| DIN 5412-4 NNU | Cylindrical roller bearings, double row, with cage, increased accuracy (simplified model) |
| DIN 5412-4 NNUK | Cylindrical roller bearings, double row, NNUK (simplified model) |
| DIN 630 K | Self aligning ball bearings, double row, conus bore (1:12) (simplified model) |
| DIN 630 | Angular self aligning ball bearings, double row (simplified model) |
| DIN 635-1 K | Self aligning roller bearings, single row (simplified model) |
| DIN 635-2 K30 | Radial spherical roller bearings - Part 2: Double row with tapered bore (1:30) (simplified model) |
| DIN 635-2 K | Radial spherical roller bearings - Part 2: Double row with tapered bore (1:12) (simplified model) |
| DIN 635-1 | Self aligning roller bearings, single row (simplified model) |
| DIN 635-2 | Radial spherical roller bearings - Part 2: Double row with cylindrical bore (simplified model) |
| DIN 24338 | Spherical plain bearing rod ends |
| DIN 24555 | Ball joints with narrow universal joint bearings |
| DIN 648 C | Spherical bearing |
| DIN 648 E | Spherical bearing |
| DIN 648 EW | Spherical bearing |
| DIN 648 G | Spherical bearing |
| DIN 648 K | Spherical bearing |
| DIN 1850-1 U | Bushes for plain bearings, form U |
| DIN 1494 | Wrapped bushes for plain bearings |
| DIN 1850-3 J | Slide bearings - Part 3: Bushes from sintered metal, form J - Cylinder bearing |
| DIN 1850-3 K | Slide bearings - Part 3: Bush from sintered metal, form K - Cup and ball bearing |
| DIN 1850-3 V | Slide bearings - Part 3: Bush from sintered metal, form V - Collar bearing |
| DIN 1850-4 M | Friction bearings - Part 4: Bushes from artificial coal, form M |
| DIN 1850-4 N | Friction bearings - Part 4: Bushes from artificial coal, form N |
| DIN 1850-5 P | Friction bearings - Part 5: Thermoset plastic bushes, form P |
| DIN 1850-5 R | Friction bearings - Part 5: Thermoset plastic bushes, form R |
| DIN 1850-6 S | Slide bearings - Part 6: Thermoplastic bushes, form S |
| DIN 1850-6 T | Slide bearings - Part 6: Thermoplastic bushes, form T |
| DIN 1850-1 G | Bushes for plain bearings, form G |
| DIN 8221 | Bushings for plain bearings |
| DIN 503 A | Flange bearings, Form A |
| DIN 503 B | Flange bearings, Form B |
| DIN 504 A | Eye type bearings, Form A |
| DIN 504 B | Eye type bearings, Form B |
| DIN 505 M | Half bearings, Form M |
| DIN 505 L | Cap bearings, Form L |
| DIN 506 C | Half bearings, Form C |
| DIN 506 A | Cap bearings, Form A |
| DIN 736 | Plummer block housings for rolling bearings of diameter series 2 |
| DIN 737 | Plummer block housings for rolling bearings of diameter series 2 |
| DIN 738 | Plummer block housings for rolling bearings of diameter series 2 |
| DIN 739 | Plummer block housings for rolling bearings of diameter series 2 |
| DIN 5401 | Roller bearings, balls for roller bearings |
| DIN 5402-1 | Cylindrical rollers |
| DIN 5415 | Adapter sleeves |
| DIN 5416 | Roller bearings, sleeves |
| DIN 5417 | Snap rings for rolling bearings |
| DIN 5419 | Felt rings for roller bearing case |
| DIN 5419 | Felt strips for roller bearing case |
| DIN 65506 | Anchor nuts with MJ-thread |
| DIN 987 A | Rivet nuts with steel core, self-locking, form A |
| DIN 987 B | Rivet nuts with steel core, self-locking, form B |
| DIN 1587 A | Hexagon cap nuts, height type, type A |
| DIN 1587 B | Hexagon cap nuts, height type, type B |
| DIN 917 A | Hexagon cap nuts, low type, type A |
| DIN 917 B | Hexagon cap nuts, low type, type B |
| DIN 985 | Prevailing torque type hexagon nuts with non-metallic, low type |
| DIN 6924 | Prevailing torque type hexagon nuts, non-metallic insert |
| DIN 6925 | Prevailing torque type hexagon nuts, all metal nuts |
| DIN 6926 | Prevailing torque type hexagon flange nuts, non-metallic insert |
| DIN 6927 | Prevailing torque type hexagon flange nuts, all metal nuts |
| DIN 980 M | Prevailing torque type hexagon nuts, all metal nuts, form M |
| DIN 980 V | Prevailing torque type hexagon nuts, all metal nuts, form V |
| DIN 982 | Prevailing torque type hexagon nuts with non-metallic insert, high type |
| DIN 986 | Prevailing torque type hexagon domed cap nuts with non metallic insert |
| DIN 466 | Knurled thumb nuts, high form |
| DIN 467 | Knurled thumb nuts, low form |
| DIN 6303 A | Knurled nuts, form A |
| DIN 6303 B | Knurled nuts, form B |
| DIN 431 B | Pipe nuts with thread, form B |
| DIN 439 B | Hexagon thin nuts, form B |
| DIN 934 | Hexagon nuts |
| DIN 936 | Hexagon thin nuts |
| DIN 555 | Hexagon nuts |
| DIN 985 | Prevailing torque type hexagon nuts with non-metallic, low type |
| DIN 30386 | Hexagon nuts, rounded acme thread |
| DIN 30387 | Shouldered nuts, metrical fine thread |
| DIN 30389 A | Hexagon nuts and crown nuts with round thread, form A (right thread) |
| DIN 30389 B | Hexagon nuts and crown nuts with round thread, form B (left thread) |
| DIN 30389 C | Hexagon nuts and crown nuts with round thread, form C (right thread) |
| DIN 30389 D | Hexagon nuts and crown nuts with round thread, form D (left thread) |
| DIN 30389 E | Hexagon nuts and crown nuts with round thread |
| DIN 34814 | Plastic hexagon nuts |
| DIN 431 A | Pipe nuts with thread, form A |
| DIN 439 A | Hex nuts, lower form A |
| DIN 6330 B | Hexagon nuts, 1.5d height |
| DIN 6331 | Hexagon nuts, 1.5d height, with collar |
| DIN 6334 | Hexagon extension nuts |
| DIN 65480 | Nuts, self locking hexagon, with MJ-thread |
| DIN 65545 | Hexagon nuts with MJ thread |
| DIN 6915 | Hexagon nuts with large widths across flats |
| DIN 6923 | Hexagon nuts with flange |
| DIN 70615 | Hexagon nuts with small widths across flats |
| DIN 977 | Hexagon weld nuts with flange |
| DIN 80705 | Thin nuts with small widths across flats |
| DIN 28129 | Clamp nuts for covers |
| DIN 1804 | Slotted round nuts for hook spanner |
| DIN 1816 | Round nuts with set pin holes inside |
| DIN 22425 | Triangular nuts |
| DIN 314 | Wing nuts, edged wings |
| DIN 315 | Wing nuts, rounded wings |
| DIN 546 | Slotted round nuts |
| DIN 547 | Round nuts with drilled holes in one face |
| DIN 548 | Round nuts with set pin holes inside |
| DIN 582 | Lifting eye nuts |
| DIN 6305 | Tommy nuts with fixed clamping bolt |
| DIN 6307 | Tommy nuts with movable clamping bolt |
| DIN 65246 | Nuts, hexagon, slitted/castellated, with MJ-thread, self-locking, in steel, classification: 1100MPa/120° |
| DIN 65247 | Thin castle nuts with MJ thread of corrosion resistant steel |
| DIN 70851 | Groove nuts |
| DIN 70852 | Groove nuts |
| DIN 74361-2 A | Disc wheels for motor vehicles and trailers, form A |
| DIN 74361-2 B | Disc wheels for motor vehicles and trailers, form B |
| DIN 74361-2 F | Disc wheels for motor vehicles and trailers, form F |
| DIN 7965 | Screwed inserts |
| DIN 7967 | Self locking counter nuts |
| DIN 80701 | Toggle nuts |
| DIN 80704 | Bow nuts, metric screw thread |
| DIN 928 | Square weld nuts |
| DIN 929 | Hexagonal weld nuts |
| DIN 935-1 | Hexagon slotted and castle nuts, metric coarse and fine pitch thread, product grades A and B |
| DIN 935-3 | Hexagon slotted nuts, metric coarse pitch thread, product grade C |
| DIN 937 | Hexagon thin slotted and castle nuts |
| DIN 979 | Hexagon thin slotted and castle nuts, metric coarse and fine pitch thread |
| DIN 557 | Square nuts |
| DIN 562 | Square thin nuts |
| DIN 7080 | Pressure resistant circular sight glasses of borosilicate glass without limitation in the range of low temperature |
| DIN 5580 A | Pressure vessels made of aluminium alloys, form A |
| DIN 5580 B1 | Pressure vessels made of aluminium alloys, form B1 |
| DIN 5580 C1 | Pressure vessels made of aluminium alloys, form C1 |
| DIN 5580 D1 | Pressure vessels made of aluminium alloys, form D1 |
| DIN 5588-1 | Flangeable compressed air devices |
| DIN 5588-1 | O-rings |
| DIN 5588-1 D | Gasket rings |
| DIN 5590 A | Pressure vessels made of steel, form A |
| DIN 5590 A-UIC | Pressure vessels made of steel, form A-UIC |
| DIN 5590 C | Pressure vessels made of steel, form C |
| DIN 5590 C-UIC | Pressure vessels made of steel, form C-UIC |
| DIN 5590 D | Pressure vessels made of steel, form D |
| DIN 5590 E | Pressure vessels made of steel, form E |
| DIN 5590 F | Pressure vessels made of steel, form F |
| DIN 7584 | Steel tube nozzles with external thread, flat sealing up to working pressure of 10 kp/cm2 |
| DIN 7585 | Sleeves, flat sealing up to working pressure of 10 kp/cm2 |
| DIN 7592 | Copper tube nozzles up to working pressure of 10 bar |
| DIN 7584 ring | Steel tube nozzles with external thread, flat sealing up to working pressure of 10 kp/cm2, rings |
| DIN 7585 ring | Sleeves, flat sealing up to working pressure of 10 kp/cm2, rings |
| DIN 7592 Ring | Copper tube nozzles up to working pressure of 10 bar, rings |
| DIN 46320-1 1 | Screwed glands for cables, clamping screws pos.-no.1 |
| DIN 46320-1 2 | Screwed glands for cables, intermediate connection pos.-no.2 |
| DIN 46320-1 3 | Screwed glands for cables, clamping screws pos.-no.3 |
| DIN 46320-1 4 | Screwed glands for cables, intermediate connection pos.-no.4 |
| DIN 46320-1 5 | Screwed glands for cables, intermediate connection pos.-no.5 |
| DIN 46320-1 6 | Screwed glands for cables, gaskets pos.-no.6 |
| DIN 46320-1 7 | Screwed glands for cables, gaskets pos.-no.7 |
| DIN 46320-1 8 | Screwed glands for cables, pressure rings pos.-no.8 |
| DIN 46320-1 9 | Screwed glands for cables, connecting thread-gaskets pos.-no.9 |
| DIN 46320-1 A | Screwed glands for cables, form A |
| DIN 46320-1 B | Screwed glands for cables, form B |
| DIN 46320-1 C | Screwed glands for cables, form C |
| DIN 46320-1 D | Screwed glands for cables, form D |
| DIN 1564 | Sockets |
| DIN 1564 | Reducing sockets |
| DIN 1565 | Double nipple |
| DIN 1565 | Reducing nipple |
| DIN 1565 | Pipe nipple |
| DIN 1566 | Double nipple |
| DIN 1566 | Reducing double nipple |
| DIN 1567 | Reducing-T |
| DIN 1567 | T-pieces |
| DIN 1568 | Cross pieces |
| DIN 1569 W | Angles |
| DIN 1569 Y | Y-pieces |
| DIN 3861 A | Solderless tube fittings, cutting rings, form A |
| DIN 3861 B | Solderless tube fittings, cutting rings, form B |
| DIN 3862 | Solderless tube fittings, double cone rings |
| DIN 3863 B1 | Compression couplings, spherical liners, form B1 |
| DIN 3863 B2 | Compression couplings, spherical liners, form B2 |
| DIN 3867 | Solderless tube fittings, pressure rings |
| DIN 3870 A2 | Non-soldering and soldering compression fittings, union nuts, series A2 |
| DIN 3870 A3 | Non-soldering and soldering compression fittings, union nuts, series A3 |
| DIN 3870 B1 | Non-soldering and soldering compression fittings, union nuts, series B1 |
| DIN 3870 B2 | Non-soldering and soldering compression fittings, union nuts, series B2 |
| DIN 3871 | Non-soldering and soldering compression couplings, socket unions, form A |
| DIN 3871 | Non-soldering and soldering compression couplings, socket unions, form B |
| DIN 3872 | Solderless tube fittings, union nuts |
| DIN 3900 | Male stud connector, non soldered connections with cutting ring, tapered stud thread |
| DIN 3901 A | Non-soldering compression fittings with cutting ring. Double ended stud ends with parallel thread for stud ends type A |
| DIN 3901 B | Non-soldering compression fittings with cutting ring. Double ended stud ends with parallel thread for stud ends type B |
| DIN 3902 | Pipe unions |
| DIN 3903 | Non soldering compression fittings with cutting ring. Elbow studs with taper threaded stud end |
| DIN 3903 F | Non soldering compression fittings with cutting ring. Elbow studs with taper threaded stud end, Form F |
| DIN 3903 P | Non soldering compression fittings with cutting ring. Elbow studs with taper threaded stud end, Form P |
| DIN 3904 | Non-soldered taper-bush type pipe unions. Elbows used as an adaptor with parallel thread on screwed in end |
| DIN 3905 F | Pipe union elbows, form F |
| DIN 3905 P | Pipe union elbows, form P |
| DIN 3906 | Non soldering compression fittings with cutting ring. Branch T-studs with taper threaded stud end |
| DIN 3906 F | Non soldering compression fittings with cutting ring. Branch T-studs with taper threaded stud end, form F |
| DIN 3906 P | Non soldering compression fittings with cutting ring. Branch T-studs with taper threaded stud end, form P |
| DIN 3907 | Non-soldered taper bush type pipe unions. T-unions used as an adaptor with parallel thread on screwed-in end |
| DIN 3908 F | Non-soldering taper-bush type pipe unions, T-adaptors, form F |
| DIN 3908 P | Non-soldering taper-bush type pipe unions, T-adaptors, form P |
| DIN 3909 | Non-soldering taper-bush type pipe unions, single-ended fittings |
| DIN 3910 | Non-soldering taper-bush type pipe unions, straight bulkheads lead in fitting |
| DIN 3911 | Non-soldering taper-bush type pipe unions, elbow bulkheads lead in fitting |
| DIN 3913 | Non soldering compression fittings with cutting ring. Run L-studs with taper threaded stud end |
| DIN 3913 F | Non soldering compression fittings with cutting ring. Run L-studs with taper threaded stud end, form F |
| DIN 3913 P | Non soldering compression fittings with cutting ring. Run L-studs with taper threaded stud end, form P |
| DIN 3914 | Non-soldered taper bush type pipe unions. L-unions used as an adaptor with parallel thread on screwed-in end |
| DIN 3942 F | Swivel elbows with 24° cone connectors and O-ring, form F |
| DIN 3942 P | Swivel elbows with 24° cone connectors and O-ring, form P |
| DIN 3943 F | Swivel branch tees with 24° cone connectors and O-ring, form F |
| DIN 3943 P | Swivel branch tees with 24° cone connectors and O-ring, form P |
| DIN 3944 F | Swivel run tees with 24° cone connectors and O-ring, form F |
| DIN 3944 P | Swivel run tees with 24° cone connectors and O-ring, form P |
| DIN 3946 | Straight reducing swivel adaptors with 24° cone connectors with O-ring |
| DIN 3951 | Non-soldering taper-bush type pipe unions, cross adaptor |
| DIN 3952 | Non-soldering taper-bush type pipe unions, adjustable elbows |
| DIN 3953 | Non-soldering taper-bush type pipe unions, adjustable T-adapter |
| DIN 3954 | Non-soldering taper-bush type pipe unions, adjustable L-adapter |
| DIN 3955 | Double ended stud ends with parallel threads and shaft for stud ends type A |
| DIN 46320-3 L | Flat nuts for screwed glands with steel conduit thread, form L |
| DIN 46320-3 M | Flat nuts for screwed glands with steel conduit thread, form M |
| DIN 46320-4 N | Lock for screwed glands, form N |
| DIN 5586 A | Locking screws with collar and vent, form A |
| DIN 5586 B | Locking screws with collar and vent, form B |
| DIN 71428 | Cylindrical thread nipples for use with union nuts |
| DIN 71429 A | Bulkheads, form A |
| DIN 71429 B | Bulkheads, form B |
| DIN 71433 A | T-pieces, form A |
| DIN 71433 B | T-pieces, form B |
| DIN 71433 C | Elbows, form C |
| DIN 74305-1 A | Hollow screws |
| DIN 74305-2 | Solderless tube fittings - Hexagon nuts (not for new construction) |
| DIN 74313-2 C | Reducers, form C |
| DIN 74313-2 D | Reducers, form D |
| DIN 74313-1 A | Non-soldering compression fittings, reducers, form A |
| DIN 74313-1 B | Non-soldering compression fittings, reducers, form B |
| DIN 74315 A | Non soldering compression couplings, elbow bodies, form A |
| DIN 74315 B | Non soldering compression couplings, elbow bodies, form B |
| DIN 74315 C | Non soldering compression couplings, elbow bodies, form C |
| DIN 7584 E | Steel tube nozzles with external thread, flat sealing up to working pressure of 10 kp/cm2, form E |
| DIN 7589 | Threaded coupling |
| DIN 7589 Ku | Boltings with flat seal, form Ku with copper tube nozzles |
| DIN 7589 S | Boltings with flat seal, form S with steel tube nozzles |
| DIN 7589 Sch | Boltings with flat seal, form Sch with sleeves |
| DIN 7592 E | Copper tube nozzles up to working pressure of 10 bar, form E |
| DIN 7605 | Cap nuts |
| DIN 7612 | Connecting piece |
| DIN 7631 | Connectors |
| DIN 7632 A | Reducing adapters with parallel screwed-in ends |
| DIN 7633 | Soldered bush |
| DIN 7637 | Adapters for welding |
| DIN 7638 | Elbow couplings |
| DIN 7638 G | Elbow couplings, form G |
| DIN 7638 P | Elbow couplings, form P |
| DIN 7639 | T-couplings |
| DIN 7639 G | T-couplings, form G |
| DIN 7639 P | T-couplings, form P |
| DIN 7641 | Ring fittings for coupling nuts |
| DIN 7643 | Hollow screws for ring-type nipples |
| DIN 7644 | Hollow screw adapters |
| DIN 7647 A | Adaptors with parallel screwed-in ends, form A |
| DIN 8063-6 W1 | Pipe connections and form pieces, form W1 |
| DIN 8063-6 W1 G | Pipe connections and form pieces, form W1 G |
| DIN 8063-6 W2 | Pipe connections and form pieces, form W2 |
| DIN 86103 B | Sockets for screwed ends - with metric fine thread and Whitworth pipe thread, form B |
| DIN 86103 C | Sockets for screwed ends - with metric fine thread and Whitworth pipe thread, form C |
| DIN 86103 E | Sockets for screwed ends - with metric fine thread and Whitworth pipe thread, form E |
| DIN 86103 F | Sockets for screwed ends - with metric fine thread and Whitworth pipe thread, form F |
| DIN 8906 E1 | Flared flange solderless compression couplings, PN 40, form E1 |
| DIN 8906 T2 | Flared flange solderless compression couplings, PN 40, form T2 |
| DIN 8906 T2/NS4 | Flared flange solderless compression couplings, PN 40, form T2/NS4 |
| DIN 8906 TR2.1 | Flared flange solderless compression couplings, PN 40, form TR2.1 |
| DIN 8906 TR2.2 | Flared flange solderless compression couplings, PN 40, form TR2.2 |
| DIN 8906 U1 | Flared flange solderless compression couplings, PN 40, form U1 |
| DIN 8906 U1.1 | Flared flange solderless compression couplings, PN 40, form U1.1 |
| DIN 8906 U2 | Flared flange solderless compression couplings, PN 40, form U2 |
| DIN 8906 UR2 | Flared flange solderless compression couplings, PN 40, form UR2 |
| DIN 8906 UR3 | Flared flange solderless compression couplings, PN 40, form UR3 |
| DIN 8906 US3 | Flared flange solderless compression couplings, PN 40, form US3 |
| DIN 8906 US3.1 | Flared flange solderless compression couplings, PN 40, form US3.1 |
| DIN 8914 B1 | Seal bonnets for 90° flared flange solderless compression couplings rated for PN 40, form B1 |
| DIN 8914 B2 | Gaskets for 90° flared flange solderless compression couplings rated for PN 40, form B2 |
| DIN 16283 | Adjusting nuts |
| DIN 2988 | Sockets, reduced |
| DIN 71430 A | Swiveling fittings for use with union nuts, knees |
| DIN 71430 B | Swiveling fittings for use with union nuts, L-pieces |
| DIN 71430 C | Swiveling fittings for use with union nuts, T-pieces |
| DIN 71430 D | Swiveling fittings for use with union nuts, cross pieces |
| DIN 7642 B | Ring type nipples for brazed connection, form B |
| DIN 7642 E | Ring type nipples for brazed connection, form E |
| DIN 11851 C | Stainless steel screwed pipe connections, form C |
| DIN 11851 D | Stainless steel screwed pipe connections, form D |
| DIN 11851 F | Stainless steel screwed pipe connections, form F |
| DIN 11851 G | Stainless steel screwed pipe connections, form G |
| DIN 11851 S | Stainless steel screwed pipe connections, form S |
| DIN 11851 SC | Stainless steel screwed pipe connections, form SC |
| DIN 11851 SD | Stainless steel screwed pipe connections, form SD |
| DIN 11851 SK | Stainless steel screwed pipe connections, form SK |
| DIN 11851 SKC | Stainless steel screwed pipe connections, form SKC |
| DIN 11851 SKD | Stainless steel screwed pipe connections, form SKD |
| DIN 11851 W | Stainless steel screwed pipe connections, form W |
| DIN 2353 A | Non-soldering compression fittings with cutting ring - complete fittings and survey, form A |
| DIN 2353 AA | Non-soldering compression fittings with cutting ring - complete fittings and survey, form AA |
| DIN 2353 AB | Non-soldering compression fittings with cutting ring - complete fittings and survey, form AB |
| DIN 2353 B | Non-soldering compression fittings with cutting ring - complete fittings and survey, form B |
| DIN 2353 BA | Non-soldering compression fittings with cutting ring - complete fittings and survey, form BA |
| DIN 2353 BB | Non-soldering compression fittings with cutting ring - complete fittings and survey, form BB |
| DIN 2353 C | Non-soldering compression fittings with cutting ring - complete fittings and survey, form C |
| DIN 2353 D | Non-soldering compression fittings with cutting ring - complete fittings and survey, form D |
| DIN 2353 F | Non-soldering compression fittings with cutting ring - complete fittings and survey, form F |
| DIN 2353 G | Non-soldering compression fittings with cutting ring - complete fittings and survey, form G |
| DIN 2353 H | Non-soldering compression fittings with cutting ring - complete fittings and survey, form H |
| DIN 2353 J | Non-soldering compression fittings with cutting ring - complete fittings and survey, form J |
| DIN 2353 M | Non-soldering compression fittings with cutting ring - complete fittings and survey, form M |
| DIN 2353 N | Non-soldering compression fittings with cutting ring - complete fittings and survey, form N |
| DIN 2353 O | Non-soldering compression fittings with cutting ring - complete fittings and survey, form O |
| DIN 2353 P | Non-soldering compression fittings with cutting ring - complete fittings and survey, form P |
| DIN 3869 | Profile sealing rings |
| DIN 968 C-H | Cross recessed pan head tapping screws with collar |
| DIN 968 C-Z | Cross recessed pan head tapping screws with collar |
| DIN 968 F-H | Cross recessed pan head tapping screws with collar |
| DIN 968 F-Z | Cross recessed pan head tapping screws with collar |
| DIN 968 R-H | Cross recessed pan head tapping screws with collar |
| DIN 968 R-Z | Cross recessed pan head tapping screws with collar |
| DIN 6928 C | Hexagon head sheet metal tapping screws with collar, form C |
| DIN 6928 F | Sechskant-Blechschrauben mit Bund, Form F |
| DIN 7504 K | Self-drilling screws with tapping screw thread, form K |
| DIN 7504 L | Self-drilling screws with tapping screw thread, form L |
| DIN 7504 M-H | Self-drilling screws with tapping screw thread, form M |
| DIN 7504 M-Z | Self-drilling screws with tapping screw thread, form M |
| DIN 7504 O-H | Self-drilling screws with tapping screw thread, form O |
| DIN 7504 O-Z | Self-drilling screws with tapping screw thread, form O |
| DIN 7504 R-H | Self-drilling screws with tapping screw thread, form R |
| DIN 7504 R-Z | Self-drilling screws with tapping screw thread, form R |
| DIN 7971 C | Slotted pan head tapping screws, form C |
| DIN 7971 F | Slotted pan head tapping screws, form F |
| DIN 7972 B | Countersunk flat head tapping screws with slot, form B |
| DIN 7972 BZ | Countersunk flat head tapping screws with slot, form BZ |
| DIN 7973 B | Raised countersunk oval head tapping screws with slot, form B |
| DIN 7973 BZ | Raised countersunk oval head tapping screws with slot, form BZ |
| DIN 7976 C | Hexagon head tapping screws, form C |
| DIN 7976 F | Hexagon head tapping screws, form F |
| DIN 7981 C-H | Pan head tapping screws with cross recessed, form C |
| DIN 7981 C-Z | Cross recessed Z pan head tapping screws, form C |
| DIN 7981 F-H | Cross recessed H pan head tapping screws, form F |
| DIN 7981 F-Z | Cross recessed Z pan head tapping screws, form F |
| DIN 7982 C-H | Cross recessed H countersunk head tapping screws, form C |
| DIN 7982 C-Z | Cross recessed countersunk head tapping screws, form C |
| DIN 7982 F-H | Cross recessed H countersunk head tapping screws, form F |
| DIN 7982 F-Z | Cross recessed countersunk head tapping screws, form F |
| DIN 7983 C-H | Cross recessed raised countersunk head H tapping screws, Form C |
| DIN 7983 C-Z | Cross recessed raised countersunk head Z tapping screws, form C |
| DIN 7983 F-H | Cross recessed raised countersunk head H tapping screws, form F |
| DIN 7983 F-Z | Cross recessed raised countersunk head Z tapping screws, form F |
| DIN 2510-3 L | Bolted fastening with waisted shank; Stud-bolts, form L |
| DIN 2510-3 K | Bolted fastening with waisted shank; Stud-bolts, form K |
| DIN 2510-3 KO | Bolted fastening with waisted shank; Stud-bolts, form KO |
| DIN 2510-3 KU | Bolted fastening with waisted shank; Stud-bolts, form KU |
| DIN 2510-3 KUO | Bolted fastening with waisted shank; Stud-bolts, form KUO |
| DIN 2510-3 Z | Bolted fastening with waisted shank; Stud-bolts, form Z |
| DIN 2510-3 ZO | Bolted fastening with waisted shank; Stud-bolts, form ZO |
| DIN 2510-3 ZU | Bolted fastening with waisted shank; Stud-bolts, form ZU |
| DIN 2510-3 ZUO | Bolted fastening with waisted shank; Stud-bolts, form ZUO |
| DIN 2510-4 GP | Bolted connections with reduced shank, studs, form GP |
| DIN 2510-4 GPO | Bolted connections with reduced shank, studs, form GPO |
| DIN 2510-4 GQ | Bolted connections with reduced shank, studs, form GQ |
| DIN 2510-4 GQO | Bolted connections with reduced shank, studs, form GQO |
| DIN 2510-4 GR | Bolted connections with reduced shank, studs, form GR |
| DIN 2510-4 GRO | Bolted connections with reduced shank, studs, form GRO |
| DIN 2510-4 GS | Bolted connections with reduced shank, studs, form GS |
| DIN 2510-4 GSO | Bolted connections with reduced shank, studs, form GSO |
| DIN 2510-4 HP | Bolted connections with reduced shank, studs, form HP |
| DIN 2510-4 HPO | Bolted connections with reduced shank, studs, form HPO |
| DIN 2510-4 HQ | Bolted connections with reduced shank, studs, form HQ |
| DIN 2510-4 HQO | Bolted connections with reduced shank, studs, form HQO |
| DIN 2510-4 HR | Bolted connections with reduced shank, studs, form HR |
| DIN 2510-4 HRO | Bolted connections with reduced shank, studs, form HRO |
| DIN 2510-4 HS | Bolted connections with reduced shank, studs, form HS |
| DIN 2510-4 HSO | Bolted connections with reduced shank, studs, form HSO |
| DIN 2510-5 NF | Bolted connections with reduced shank; hexagon nuts |
| DIN 2510-5 TF | Bolted connections with reduced shank; hexagon nuts |
| DIN 2510-6 AF | Bolted connections with reduced shank; cap nuts |
| DIN 2510-6 AFO | Bolted connections with reduced shank; cap nuts |
| DIN 2510-6 BF | Bolted connections with reduced shank; cap nuts |
| DIN 2510-6 BFO | Bolted connections with reduced shank; cap nuts |
| DIN 2510-7 D | Bolted connections with reduced shank; extension sleeves |
| DIN 2510-7 E | Bolted connections with reduced shank; extension sleeves |
| DIN 2509 K | Double end studs, form K |
| DIN 2509 L | Double end studs, form L |
| DIN 975 | Threaded rod |
| DIN 976-1 A | Stud bolts - Part 1: Metric thread, form A |
| DIN 976-1 B | Stud bolts - Part 1: Metric thread, form B |
| DIN 976-2 | Stud bolts, metric thread MFS |
| DIN 74361-2 D | Disc wheels for motor vehicles and trailers, form D |
| DIN 74361-2 E | Disc wheels for motor vehicles and trailers, form E |
| DIN 32501-1 | Welding studs with external thread |
| DIN 417 | Slotted set screws with full dog point |
| DIN 427 | Slotted headless screws with chamfered end |
| DIN 438 | Slotted set screws with cup point |
| DIN 551 | Slotted set screws with flat point |
| DIN 553 | Slottet set screws with cone point |
| DIN 913 | Hexagon socket set screws with flat point |
| DIN 914 | Hexagon socket set screws with cone point |
| DIN 915 | Hexagon socket set screws with dog point |
| DIN 916 | Hexagon socket set screws with cup point |
| DIN 926 | Slotted set screws with full dog point |
| DIN 34827 | Hexalobular socket set screws |
| DIN 95 | Recessed raised countersunk head wood screws, with slot |
| DIN 96 | Slotted half round head wood screws |
| DIN 97 | Slotted countersunk flat head wood screws |
| DIN 571 | Hexagon wood screws |
| DIN 7995 H | Cross recessed raised countersunk head wood screws, form H |
| DIN 7995 Z | Cross recessed raised countersunk head wood screws, form Z |
| DIN 7996 H | Cross recessed half round head wood screws, form H |
| DIN 7996 Z | Cross recessed half round head wood screws, form Z |
| DIN 7997 H | Cross recessed countersunk head wood screws, form H |
| DIN 7997 Z | Cross recessed countersunk head wood screws, form Z |
| DIN 464 | Knurled thumb screws, high type |
| DIN 464 SZ | Knurled thumb screws, high type SZ |
| DIN 465 | Slotted knurled thumb screws |
| DIN 653 | Knurled thumb screws, thin type |
| DIN 7964 KF | Bolts and screws with coarse thread and reduced shank, form KF |
| DIN 7964 LF | Bolts and screws with coarse thread and long shank, form LF |
| DIN 558 | Hexagon screws, thread proximate till head |
| DIN 561 | Hexagon head set screws with small hexagon and dog point, form ZA |
| DIN 564 | Hexagon set screws with half dog point |
| DIN 601 | Hexagon bolts, without hexagon nut |
| DIN 601 Mu | Hexagon bolts, with hexagon nut DIN 555 |
| DIN 609 | Hexagon fits bolts with long thread |
| DIN 610 | Hexagon fitting bolts with short threaded portion |
| DIN 65265 | Hexagon bolts with MJ thread |
| DIN 65267 | Hexagon bolts with MJ thread |
| DIN 65268 | Hexagon bolts with MJ thread |
| DIN 65522 | Hexagon bolts with MJ thread |
| DIN 65523 | Hexagon bolts with MJ thread |
| DIN 65525 | Bolts, hexagon, close tolerance, with MJ thread, short thread, steel, nominal strength 1100 MPa, for temperatures up to 235°C |
| DIN 6914 | Hexagon screws with large widths across flats |
| DIN 6921 | Hexagon bolts with flange |
| DIN 6922 | Hexagon flange bolts with reduced shank |
| DIN 6929 KDE | Screws with coarse thread and reduced shank for captive applications, form KDE |
| DIN 6929 LDE | Screws with coarse thread and reduced shank for captive applications, form LDE |
| DIN 7500-1 DE | Thread rolling screws for metrical ISO thread |
| DIN 7513 A | Thread - Self-tapping screws, form A |
| DIN 7964 KD1 | Bolts and screws with coarse thread and reduced shank, form KD1 |
| DIN 7964 KD2 | Bolts and screws with coarse thread and reduced shank, form KD2 |
| DIN 7964 KDE | Bolts and screws with coarse thread and reduced shank, form KDE |
| DIN 7964 LD1 | Bolts and screws with coarse thread and long shank, form LD1 |
| DIN 7964 LD2 | Bolts and screws with coarse thread and long shank, form LD2 |
| DIN 7964 LDE | Bolts and screws with coarse thread and long shank, form LDE |
| DIN 7968 | Hexagon fit bolts |
| DIN 7968 Mu | Hexagon fit bolts with hexagon nut for steel structures |
| DIN 7990 | Hexagon bolts without nut for steel structures |
| DIN 7990 Mu | Hexagon bolts with nut |
| DIN 7999 | High tensile strength hexagon fit bolts with large width across flats for stuctural bolting |
| DIN 931-1 | Hexagon head bolts with shank, product classes A and B |
| DIN 931-2 | Hexagon head bolts, metric thread M42 to M160 x 6, product grade B |
| DIN 933 | Hexagon set screws with thread to head, product groups A and B |
| DIN 960 | Hexagon set screws with shank, metric fine thread |
| DIN 961 | Hexagon set screws with thread to head, fine thread |
| DIN 34823 | Raised countersunk head screws with 12 point socket |
| DIN 7969 | Slotted countersunk flat head screws |
| DIN 7969 Mu | Slotted countersunk head bolts with hexagon nut for steel structures |
| DIN 7991 | Hexagon socket countersunk head screws |
| DIN 8245 | Sloted countersunk (flat) head screws for fine mechanics |
| DIN 924 | Slotted raised countersunk head screws with dog point |
| DIN 963 A | Slotted countersunk flat head screws, Thread to the head |
| DIN 963 C | Slotted countersunk flat head screws, with shaft |
| DIN 964 A | Slotted raised countersunk (oval) head screws, thread to the head |
| DIN 964 C | Slotted raised countersunk (oval) head screws, with shaft |
| DIN 965 A-H | Cross recessed H countersunk (flat) head screws, thread up to head |
| DIN 965 A-Z | Cross recessed Z countersunk (flat) head screws, thread up to head |
| DIN 965 C-H | Cross recessed H countersunk (flat) head screws, incl. shaft |
| DIN 965 C-Z | Cross recessed Z countersunk (flat) head screws, incl. shaft |
| DIN 966 A-H | Cross recessed countersunk H (oval) head screws, thread with head |
| DIN 966 A-Z | Cross recessed countersunk Z (oval) head screws, thread with head |
| DIN 966 C-H | Cross recessed countersunk H (oval) head screws, thread with head |
| DIN 966 C-Z | Cross recessed countersunk Z (oval) head screws, thread with head |
| DIN 6929 KNE-H | Screws with coarse thread and reduced shank for captive applications, form KNE-H |
| DIN 6929 LNE-H | Screws with coarse thread and reduced shank for captive applications, form LNE-H |
| DIN 6929 KNE-Z | Screws with coarse thread and reduced shank for captive applications, form KNE-Z |
| DIN 6929 LNE-Z | Screws with coarse thread and reduced shank for captive applications, form LNE-Z |
| DIN 21346 | Square head bolts for shaft guides |
| DIN 21346 Mu | Square head bolts for shaft guides, with hexagon nut DIN 555 |
| DIN 22424 A | Triangle head bolts, form A |
| DIN 22424 B | Triangle head bolts, form B |
| DIN 25192 | T-head bolts, for railway vehicles |
| DIN 25193 | Mushroom head anchor screws |
| DIN 25195 | Countersunk bolts with double nip |
| DIN 316 | Wing screws |
| DIN 34817 | Weld screws with metric thread |
| DIN 444 A | Eye bolts, form A |
| DIN 444 B | Eye bolts, form B |
| DIN 444 C | Eye bolts, form C |
| DIN 4626 A | Center bolts for laminated leaf springs, form A |
| DIN 478 | Square screws with collar |
| DIN 479 | Square screws with short dog point |
| DIN 480 | Square head bolts with collar and short dog point with rounded end |
| DIN 525 C | Studs for welding, form C |
| DIN 525 B | Studs for welding, form B |
| DIN 529 | Masonry bolts |
| DIN 529 Mu SHB | Masonry bolts, with hexagon nut DIN 555 and with washer DIN 125 or DIN 126 |
| DIN 529 A | Masonry bolts, form A |
| DIN 529 A Mu SHB | Masonry bolts, form A, with hexagon nut DIN 555 and with washer DIN 125 or DIN 126 |
| DIN 529 B | Masonry bolts, form B |
| DIN 529 B Mu SHB | Masonry bolts, form B, with hexagon nut DIN 555 and with washer DIN 125 or DIN 126 |
| DIN 529 C | Masonry bolts, form C |
| DIN 529 C Mu SHB | Masonry bolts, form C, with hexagon nut DIN 555 and with washer DIN 125 or DIN 126 |
| DIN 529 D | Masonry bolts, form D |
| DIN 529 D Mu SHB | Masonry bolts, form D, with hexagon nut DIN 555 and with washer DIN 125 or DIN 126 |
| DIN 529 E | Masonry bolts, form E |
| DIN 529 E Mu SHB | Masonry bolts, form E, with hexagon nut DIN 555 and with washer DIN 125 or DIN 126 |
| DIN 529 F | Masonry bolts, form F |
| DIN 529 F Mu SHB | Masonry bolts, form F, with hexagon nut DIN 555 and with washer DIN 125 or DIN 126 |
| DIN 529 G | Masonry bolts, form G |
| DIN 529 G Mu SHB | Masonry bolts, form G, with hexagon nut DIN 555 and with washer DIN 125 or DIN 126 |
| DIN 580 | Ring bolts |
| DIN 603 | Cup head square neck bolts |
| DIN 603 Mu | Cup head square neck bolts, with hexagon nut |
| DIN 604 | Flat countersunk nib bolts |
| DIN 604 Mu | Flat countersunk nib bolts, with hexagon nut DIN 555 |
| DIN 605 | Flat countersunk square neck bolts (with long square) |
| DIN 605 Mu | Flat countersunk square neck bolts (with long square), with hexagon nut DIN 555 |
| DIN 607 | Cup head nib bolts |
| DIN 607 Mu | Cup head nib bolts, with hexagon nut DIN 555 |
| DIN 608 | Flat countersunk square neck bolts |
| DIN 608 Mu | Flat countersunk square neck bolts, with hexagon nut DIN 555 |
| DIN 6306 D | Tommy screws with moveable clamping bolt, form D |
| DIN 6306 E | Tommy screws with moveable clamping bolt, with pressure peace, form E |
| DIN 6332 S | Grub screws with thrust point, form S |
| DIN 6332 IS | Grub screws with thrust point, form IS |
| DIN 74361-2 G | Disc wheels for motor vehicles and trailers, fastening devices for bolt centering, orb collar bolt, form G |
| DIN 7500-1 AE | Thread rolling screws for metrical ISO thread, form AE |
| DIN 7500-1 BE | Thread rolling screws for metrical ISO thread, form BE |
| DIN 7500-1 KE | Thread rolling screws for metrical ISO thread, form KE |
| DIN 7500-1 LE | Thread rolling screws for metrical ISO thread, form LE |
| DIN 7500-1 ME | Thread rolling screws for metrical ISO thread, form ME |
| DIN 7500-1 CE-H | Thread rolling screws for metrical ISO thread, form CE |
| DIN 7500-1 CE-Z | Thread rolling screws for metrical ISO thread, form CE |
| DIN 7500-1 E | Thread rolling screws for metrical ISO thread, form E |
| DIN 7500-1 EE | Thread rolling screws for metrical ISO thread, form EE |
| DIN 7500-1 NE-H | Thread rolling screws for metrical ISO thread, form NE |
| DIN 7500-1 NE-Z | Thread rolling screws for metrical ISO thread, form NE |
| DIN 7500-1 OE | Thread rolling screws for metrical ISO thread, form OE |
| DIN 7500-1 PE | Thread rolling screws for metrical ISO thread, form PE |
| DIN 7500-1 QE | Thread rolling screws for metrical ISO thread, form QE |
| DIN 7513 BE | Thread - Self-tapping screws, form BE |
| DIN 7513 FE | Thread - Self-tapping screws, form FE |
| DIN 7513 GE | Thread - Self-tapping screws, form GE |
| DIN 7516 AE-H | Thread cutting screws recessed head, form AE |
| DIN 7516 AE-Z | Thread cutting screws recessed head, form AE |
| DIN 7516 DE-H | Thread cutting screws recessed head, form DE |
| DIN 7516 DE-Z | Thread cutting screws recessed head, form DE |
| DIN 7516 EE-H | Thread cutting screws recessed head, form EE |
| DIN 7516 EE-Z | Thread cutting screws recessed head, form EE |
| DIN 797 | Anchor screws |
| DIN 921 | Slotted pan head screws with large head |
| DIN 922 | Slotted pan head screws, small head and stud |
| DIN 925 | Slotted countersunk flat head screws and pivot |
| DIN 927 | Pin screw slotted |
| DIN 15237 | Seating screws |
| DIN 15237 Mu | Continuous mechanical handling equipment, seating screws with hexagon nuts DIN 555 |
| DIN 65438 | Bihexagonal head bolts, close tolerance, with MJ thread, short thread length, in titanium alloy, nominal tensile strength 1100 MPa, for temperatures up to 315°C |
| DIN 43165 A | Electric traction; screws with cup point for overhead fittings, form A |
| DIN 43165 B | Electric traction; screws with cup point for overhead fittings, form B |
| DIN 43165 C | Electric traction; screws with cup point for overhead fittings, form C |
| DIN 938 | Studs - Metal end approx. 1d |
| DIN 6379 | Studs for use with tee nuts |
| DIN 835 | Studs - Metal end approx. 2d |
| DIN 939 | Studs - Metal end approx. 1.25d |
| DIN 940 | Studs - Metal end approx. 2.5d |
| DIN 949-1 A | Studs with metric interference thread MFS - Part 1: Lengths of engagenent = 2d (Type A) |
| DIN 949-2 B | Studs with metric interference thread MFS - Part 1: Lengths of engagement = 2.5d (Type B) |
| DIN 34800 B | Bolts and screws with external hexalobular driving feature with small flange, form B |
| DIN 34800 C | Bolts and screws with external hexalobular driving feature with small flange, form C |
| DIN 34801 B | Bolts and screws with external hexalobular driving feature with large flange, form B |
| DIN 34801 C | Bolts and screws with external hexalobular driving feature with large flange, form C |
| DIN 34802 | Hexalobular socket head cap screws with large driving feature |
| DIN 34805-1 | Button head screws - Part 1: Driving feature hexalobular socket |
| DIN 34805-2 | Button head screws - Part 2: Screws with collar and driving feature hexalobular socket |
| DIN 34819 R | Hexabular socket raised head tapping screws with collar |
| DIN 34819 F | Hexabular socket raised head tapping screws with collar |
| DIN 34819 C | Hexabular socket raised head tapping screws with collar |
| DIN 6929 KOE | Screws with coarse thread and reduced shank for captive applications, form KOE |
| DIN 6929 LOE | Screws with coarse thread and reduced shank for captive applications, form LOE |
| DIN 6929 KPE | Screws with coarse thread and reduced shank for captive applications, form KPE |
| DIN 6929 LPE | Screws with coarse thread and reduced shank for captive applications, form LPE |
| DIN 6929 KQE | Screws with coarse thread and reduced shank for captive applications, form KQE |
| DIN 6929 LQE | Screws with coarse thread and reduced shank for captive applications, form LQE |
| DIN 906 | Internal drive pipe plugs, conical thread |
| DIN 906 ISR | Pipe plugs with hexalobular, conical thread |
| DIN 906 IVZ | Pipe plugs with internal serration, conical thread |
| DIN 908 | Hexagon socket screw plugs with collar, cylindrical thread |
| DIN 908 ISR | Plug screws with collar and hexagon socket (ISR) according to DIN EN ISO 10664, cylindrical thread |
| DIN 908 IVZ | Plug screws with collar and internal serration (IVZ) in accordance with DIN 34824, cylindrical thread |
| DIN 908 L-ISK | Hexagon socket screw plugs with collar, type L - light version, cylindrical thread |
| DIN 908 L-ISR | Plug screws with collar and hexagon socket (ISR) according to DIN EN ISO 10664, type L - light version, cylindrical thread |
| DIN 908 L-IVZ | Plug screws wirh collar and internal serration (IVZ) in accordance with DIN 34824, type L - light version, cylindrical thread |
| DIN 909 | Hexagon head pipe plugs, conical thread |
| DIN 910 | Hexagon head screws plugs with collar, cylindrical thread, rule execution |
| DIN 910 L | Hexagon head screws plugs with collar, cylindrical thread, type L (light version) |
| DIN 7604 A | Hexagon head screw plugs; light type, cylindrical thread, form A |
| DIN 7604 B | Hexagon head screw plugs; light type, cylindrical thread, form B |
| DIN 7604 C | Hexagon head screw plugs; light type, tapered thread, form C |
| DIN 34821 | Cheese head screws with 12 point socket |
| DIN 34822 | Cheese head screws with flange with 12 point socket |
| DIN 404 | Slotted capstan screws |
| DIN 6912 | Hexagon socket head cap screws with reduced loadability, low head, with centre |
| DIN 6929 KCE-H | Screws with coarse thread and reduced shank for captive applications, form KCE-H |
| DIN 6929 LCE-H | Screws with coarse thread and reduced shank for captive applications, form LCE-H |
| DIN 6929 KCE-Z | Screws with coarse thread and reduced shank for captive applications, form KCE-Z |
| DIN 6929 LCE-Z | Screws with coarse thread and reduced shank for captive applications, form LCE-Z |
| DIN 6929 KEE | Screws with coarse thread and reduced shank for captive applications, form KEE |
| DIN 6929 LEE | Screws with coarse thread and reduced shank for captive applications, form LEE |
| DIN 7964 KA | Bolts and screws with coarse thread and reduced shank, form KA |
| DIN 7964 KAE | Bolts and screws with coarse thread and reduced shank, form KAE |
| DIN 7964 KB | Bolts and screws with coarse thread and reduced shank, form KB |
| DIN 7964 KBE | Bolts and screws with coarse thread and reduced shank, form KBE |
| DIN 7964 KC-H | Bolts and screws with coarse thread and reduced shank, form KC-H |
| DIN 7964 KC-Z | Bolts and screws with coarse thread and reduced shank, form KC-Z |
| DIN 7964 KCE-H | Bolts and screws with coarse thread and reduced shank, form KCE-H |
| DIN 7964 KCE-Z | Bolts and screws with coarse thread and reduced shank, form KCE-Z |
| DIN 7964 KE | Bolts and screws with coarse thread and reduced shank, form KE |
| DIN 7964 KEE | Bolts and screws with coarse thread and reduced shank, form KEE |
| DIN 7964 KGE | Bolts and screws with coarse thread and reduced shank, form KGE |
| DIN 7964 LA | Bolts and screws with coarse thread and long shank, form LA |
| DIN 7964 LAE | Bolts and screws with coarse thread and long shank, form LAE |
| DIN 7964 LB | Bolts and screws with coarse thread and long shank, form LB |
| DIN 7964 LBE | Bolts and screws with coarse thread and long shank, form LBE |
| DIN 7964 LC-H | Bolts and screws with coarse thread and long shank, form LC-H |
| DIN 7964 LC-Z | Bolts and screws with coarse thread and long shank, form LC-Z |
| DIN 7964 LCE-H | Bolts and screws with coarse thread and long shank, form LCE-H |
| DIN 7964 LCE-Z | Bolts and screws with coarse thread and long shank, form LCE-Z |
| DIN 7964 LE | Bolts and screws with coarse thread and long shank, form LE |
| DIN 7964 LEE | Bolts and screws with coarse thread and long shank, form LEE |
| DIN 7964 LGE | Bolts and screws with coarse thread and long shank, form LGE |
| DIN 7984 | Hexagon socket head cap screws with low head with reduced loadability |
| DIN 7985 H | Cross recessed raised cheese head screws H |
| DIN 7985 Z | Cross recessed raised cheese head screws Z |
| DIN 8243 A | Slotted cheese head screws for fine mechanics |
| DIN 8243 B | Slotted cheese head screws for fine mechanics |
| DIN 8243 C | Slotted cheese head screws for fine mechanics |
| DIN 84 | Slotted cheese head screws, accordingin to ISO 1207 |
| DIN 85 | Slotted pan head screws, Product grade A |
| DIN 912 | Hexagon socket head cap screws |
| DIN 920 | Slotted pan head screws with small head |
| DIN 923 | Slotted pan head screws with shoulder |
| DIN 967 H | Cross recessed pan head screws with collar, form H |
| DIN 967 Z | Cross recessed pan head screws with collar, form Z |
| DIN 9841 A | Hexagon socket slotted head cap screws, form A |
| DIN 9841 B | Hexagon socket slotted head cap screws, form B |
| DIN 1478 | Turnbuckles made from tubes or bars |
| DIN 1479 | Hexagon turnbuckles |
| DIN 1480 | Forged turnbuckles (open form) |
| DIN 186 A | T-head bolts with square neck, form A |
| DIN 186 B | T-head bolts with square neck, form B |
| DIN 188 | T-head bolts with double nib |
| DIN 261 | T-head bolt |
| DIN 34828 | Welding studs for turnbuckles |
| DIN 508 | Nuts for T-grooves |
| DIN 6304 E | Tommy screw with fixed clamping bolt, form E |
| DIN 6304 F | Tommy screw with fixed clamping bolt, form F |
| DIN 6310 | Side view pressure spring for drill fixture |
| DIN 6314 | Clamp, straight |
| DIN 6315 B | Clamp forked, form B |
| DIN 6315 C | Clamp forked-with round rudiment, form C |
| DIN 6316 | Goose neck clamp |
| DIN 6319 C | Spherical washers, form C |
| DIN 6319 D | Conical seats, form D |
| DIN 6319 G | Conical seats, form G |
| DIN 6323 A | Slot stones loose, form A |
| DIN 6323 B | Slot stones loose, form B |
| DIN 6323 C | Slot stones loose, form C |
| DIN 6372 | Pre plug washers for gadget |
| DIN 649 | T-slots for T-head bolts |
| DIN 650 | T-slots |
| DIN 787 | Screws for T-slots |
| DIN 7992 | T-head bolts with large head |
| DIN 82004-1 1 | Turnbuckles |
| DIN 82004-1 A | Turnbuckles with oval eye, form A |
| DIN 82004-1 B | Turnbuckles with double lug, form B |
| DIN 82004-1 C | Turnbuckles with stud eye head fittings, form C |
| DIN 82004-1 D | Turnbuckles with double lug and stud eye head fittings, form D |
| DIN 82004-1 E | Turnbuckles with double lug and oval eye, form E |
| DIN 82004-2 1 | Turnbuckles |
| DIN 82004-2 A | Turnbuckles with oval eye, form A |
| DIN 82004-2 B | Turnbuckles with double lug, form B |
| DIN 82004-2 C | Turnbuckles with stud eye head fittings, form C |
| DIN 82004-2 D | Turnbuckles with double lug and stud eye head fittings, form D |
| DIN 82004-2 E | Turnbuckles with double lug and oval eye, form E |
| DIN 82006 B | Oval eye head fittings with metric thread for swivels, form B |
| DIN 82006 C | Oval eye head fittings with metric thread for turnbuckles, form C |
| DIN 82006 D | Oval eye head fittings with metric thread for turnbuckles, form D |
| DIN 82008-1 B | Double lug head fittings with threaded shank – Part 1: For swivels and turnbuckles, non-alloy quality steel, form B |
| DIN 82008-1 C | Double lug head fittings with threaded shank – Part 1: For swivels and turnbuckles, non-alloy quality steel, with right-hand thread, form C |
| DIN 82008-1 D | Double lug head fittings with threaded shank – Part 1: For swivels and turnbuckles, non-alloy quality steel, with left-hand thread, form D |
| DIN 82008-2 C | Double lug head fittings with threaded shank – Part 2: For turnbuckles, stainless steel, with right-hand thread, form C |
| DIN 82008-2 D | Double lug head fittings with threaded shank – Part 2: For turnbuckles, stainless steel, with left-hand thread, form D |
| DIN 82010 B | Stud eye head fittings with metric thread for swivels, form B |
| DIN 82010 C | Stud eye head fittings with metric thread for turnbuckles, form C |
| DIN 82010 D | Stud eye head fittings with metric thread for turnbuckles, form D |
| DIN 42923 | Slide rails for electrical machines |
| DIN 1024 TB | Hot-rolled T-bars with round edges, form TB |
| DIN 1024 T | Hot-rolled T-bars with round edges, form T |
| DIN 1025-1 | Hot rolled I-beams - Part 1: narrow flange I-beams, I-serie |
| DIN 1025-2 | Hot rolled I-beams - Part 2: I-girder, IPB-row |
| DIN 1025-3 | Hot rolled I-beams, bright I-girder, light type, IPBI row |
| DIN 1025-4 | Hot rolled I-beams, bright I-girder, heightened type, IPBv row |
| DIN 1025-5 | Hot rolled I-beams, Medium flange I-beams, IPE-serie |
| DIN 1026-1 | Hot-rolled steel channels - Part 1: Taper flange steel channels |
| DIN 1026-2 | Hot-rolled steel channels - Part 2: Parallel flange steel channels |
| DIN 1027 | Hot-rolled zees with round edges |
| DIN 1028 | Hot-rolled equal leg angles with round edges |
| DIN 1029 | Hot-rolled unequal leg angles with round edges |
| DIN 1570 | Hot-rolled ribbed and grooved spring steel |
| DIN 1771 | Angles of wrought aluminium and aluminium alloys |
| DIN 2395-1 A | Rectangular and square welded precision steel tubes, form A |
| DIN 2395-1 B | Rectangular and square welded precision steel tubes, form B |
| DIN 2395-3 | Rectangular and square electric welded precision steel tubes |
| DIN 536-1 A | Craine rails dimensions, sectional properties, steel grades for crane rails with foot flange, form A |
| DIN 59051 | Hot-rolled sharp-edged T-bars |
| DIN 59200 | Hot-rolled wide flats |
| DIN 59350 | Precision flats steel |
| DIN 59350 | Precision squares |
| DIN 59370 | Bright steel sharp-edged equal leg angles |
| DIN 59370 | Bright steel sharp-edged unequal leg angles |
| DIN 59410 | Hot formed square and rectangular steel tubes |
| DIN 59411 | Cold formed welded square and rectangular steel tubes |
| DIN 6318 | Stepped packing blocks as support for clamps |
| DIN 6326 A | Stepped settings up blocks, form A |
| DIN 6326 B | Stepped settings up blocks, form B |
| DIN 6326 C | Stepped settings up blocks, form C |
| DIN 6326 G | Stepped settings up blocks, form G |
| DIN 6326 K | Stepped settings up blocks, form K |
| DIN 9825-2 D | Guide pillars for press tool sets, form D |
| DIN 9825-3 K | Guide pillars for press tool sets, form K |
| DIN 9825-4 L | Guide pillars for press tool sets, form L |
| DIN 9825-4 LA | Guide pillars for press tool sets, form LA |
| DIN 9831-1 AG | Guide bushes for press tool sets, form AG |
| DIN 9831-1 BG | Guide bushes for press tool sets, form BG |
| DIN 9831-1 CG | Guide bushes for press tool sets, form CG |
| DIN 9831-2 AW | Guide bushes for press tool sets, form AW |
| DIN 9831-2 BW | Guide bushes for press tool sets, form BW |
| DIN 9831-2 CW | Guide bushes for press tool sets, form CW |
| DIN 9832 | Holder for guide bushes large press tools |
| DIN 9833 A | Guide posts, form A |
| DIN 9833 D | Guide posts, form D |
| DIN 9834 | Guide bushes for press tools |
| DIN 9835-1 | Elastomer pressure springs for press tools |
| DIN 9835-2 A | Elastomer pressure springs for press tools, form A |
| DIN 9835-2 B | Elastomer pressure springs for press tools, form B |
| DIN 9837 | Round punches with cylindrical head |
| DIN 9839 A | Punches with ball fixation, form A |
| DIN 9840-1 D | Round punches, perforation punch with continuous shank, form D |
| DIN 9840-1 DA | Round punches, perforation punch with continuous shank, form DA |
| DIN 9840-2 C | Round punches, perforation punch with stepped shank, form C |
| DIN 9840-2 CA | Round punches, perforation punch with stepped shank, form CA |
| DIN 9840-2 E | Round punches, perforation punch with stepped shank, form E |
| DIN 9840-2 EA | Round punches, perforation punch with stepped shank, form EA |
| DIN 9843 | Round punches with ball fixation |
| DIN 9844 A | Round punches with cylindrical head, form A |
| DIN 9844 B | Round punches with cylindrical head, form B |
| DIN 9845 A | Piercing die bushes and punch guide bushes, form A |
| DIN 9845 B | Piercing die bushes and punch guide bushes, form B |
| DIN 9845 C | Piercing die bushes and punch guide bushes, form C |
| DIN 9845 D | Piercing die bushes and punch guide bushes, form D |
| DIN 9845 E | Piercing die bushes and punch guide bushes, form E |
| DIN 9846 A | Rectangular punches for press tools, form A |
| DIN 9846 B | Rectangular punches for press tools, form B |
| DIN 9846 C | Rectangular punches for press tools, form C |
| DIN 9847 | Ejectors |
| DIN 9848 | Trigger stops for cut-out |
| DIN 9849 A | Stops for cut-off, form A |
| DIN 9849 B | Stops for cut-off, form B |
| DIN 9859-2 A | Rivet shanks for press tools, form A |
| DIN 9859-2 AE | Rivet shanks for press tools, form AE |
| DIN 9859-3 CE | Screwed shanks for press tools, form CE |
| DIN 9859-4 D | Shanks for press tools, necked and flanged, form D |
| DIN 9859-4 DE | Shanks for press tools, necked and flanged, form DE |
| DIN 9859-5 E | Punch holder shanks with round cover plate, form E |
| DIN 9859-5 EE | Punch holder shanks with round cover plate, form EE |
| DIN 9859-5 EF | Punch holder shanks with round cover plate, form EF |
| DIN 9859-6 G | Rectangular flanged shanks, form G |
| DIN 9859-6 GE | Rectangular flanged shanks, form GE |
| DIN 9859-6 H | Rectangular flanged shanks, form H |
| DIN 9859-6 HE | Rectangular flanged shanks, form HE |
| DIN 9859-7 K | Screwed collar shanks for press tools, form K |
| DIN 9859-7 KE | Screwed collar shanks for press tools, form KE |
| DIN 9861-1 D | Round punches with straight shaft up to 20 mm cutting diameter, form D |
| DIN 9861-1 DA | Round punches with straight shaft up to 20 mm cutting diameter, form DA |
| DIN 9861-2 C | Round punches with stepped shaft up to 2.5 mm cutting diameter, form C |
| DIN 9861-2 CA | Round punches with stepped shaft up to 2.5 mm cutting diameter, form CA |
| DIN 9862 A | Side cutters, form A |
| DIN 9862 B | Side cutters, form B |
| DIN 9862 C | Side cutters, form C |
| DIN 9863 A | Stops for side cutter, form A |
| DIN 9863 B | Stops for side cutter, form B |
| DIN 9863 C | Stops for side cutter, form C |
| DIN 9863 D | Stops for side cutter, form D |
| DIN 9864-1 A | Round find spikes, form A |
| DIN 9864-1 B | Round find pins, form B |
| DIN 9864-1 C | Round find pins, form C |
| DIN 9864-1 D | Round find pins, form D |
| DIN 9864-1 E | Round find pins, form E |
| DIN 9864-1 F | Round find pins, form F |
| DIN 9865 | Designation plates |
| DIN 9866-1 A | Top tool holders for press tools, form A |
| DIN 9866-1 AD | Top tool holders for press tools, form AD |
| DIN 9866-1 ADE | Top tool holders for press tools, form ADE |
| DIN 9866-1 AE | Top tool holders for press tools, form AE |
| DIN 9866-2 B | Top tool holders for press tools, form B |
| DIN 9866-2 BD | Top tool holders for press tools, form BD |
| DIN 9866-2 BDE | Top tool holders for press tools, form BDE |
| DIN 9866-2 BE | Top tool holders for press tools, form BE |
| DIN 9866-3 C | Stamp heads, angular, light construction, form C |
| DIN 9866-3 CD | Stamp heads, angular, light construction, form CD |
| DIN 9873-1 A | Pressing tools, plates for tools, form A |
| DIN 9873-1 B | Pressing tools, plates for tools, form B |
| DIN 9873-1 C | Pressing tools, plates for tools, form C |
| DIN 1469 A | Fitting grooved pins with neck, form A |
| DIN 1469 B | Fitting grooved pins with neck, form B |
| DIN 1469 C | Fitting grooved pins with neck, form C |
| DIN 1470 | Grooved pins, full length parallel grooved mit pilot |
| DIN 1471 | Grooved pins, full length taper grooved |
| DIN 1472 | Feather grooved pins |
| DIN 1473 | Grooved pins |
| DIN 1474 | Grooved pins, half length reverse grooved |
| DIN 1475 | Grooved pins, third length center grooved |
| DIN 1476 | Round head grooved pins |
| DIN 1477 | Countersunk head grooved pins |
| DIN 1143-1 | Nails for use in automatic nailing machines |
| DIN 1144 A | Nails for light weight building slabs, form A |
| DIN 1144 B | Nails for light weight building slabs, form B |
| DIN 1151 A | Round plain head nails, form A |
| DIN 1151 B | Round plain head nails, form B |
| DIN 1152 | Round nails with cold headed head |
| DIN 1157 | Tin tacks |
| DIN 1158 | Hook nails |
| DIN 1163 | Molder pins |
| DIN 18182-4 | Accessories for use with gypsum plasterboards, nails |
| DIN 68163 A | Fasteners for assembling timber pallets, nails, form A |
| DIN 68163 K | Fasteners for assembling timber pallets, nails, form K |
| DIN 124 | Round head rivets, nominal diameters 10 to 36 mm, form A/B |
| DIN 660 | Half-round-rivet, nominal diameters 1 to 8 mm, form A/B |
| DIN 7341 A | Rivet pins, form A |
| DIN 302 | Countersunk head rivets, nominal diameters 10 to 36 mm, form A/B |
| DIN 65379 | Countersunk rivets 100° |
| DIN 65399 | Countersunk rivets 100° |
| DIN 65547 P | Rivets with universal head, of titanium base alloy, metric series, form P |
| DIN 65547 S | Rivets with universal head, of titanium base alloy, metric series, form S |
| DIN 65548 P | Rivets with counter sunk 100°, titan alloy, metric row, form P |
| DIN 65548 S | Rivets with counter sunk 100°, titan alloy, metric row, form S |
| DIN 65552 | Blind rivets with 100° countersunk head, corrosion-resisting steel, with mandrel |
| DIN 661 | Countersunk-head rivets nominal diameter 1 to 8 mm, form A/B |
| DIN 662 | Filister rivets, nominal diameter 1.6 to 6 mm |
| DIN 662 | Filister rivets, nominal diameter 1.6 to 6 mm, form A/B |
| DIN 674 | Snap head rivets, nominal diameter 1.4 to 6 mm |
| DIN 674 | Snap head rivets, nominal diameter 1.4 to 6 mm, form A/B |
| DIN 675 | Flat countersunk head rivets, nominal diameters 3 to 5 mm |
| DIN 6791 | Semi-tubular pan head rivets, nominal diameters 1.6 to 10 mm |
| DIN 6792 | Halbhohlniete mit Senkkopf, _x000D_ Nenndurchmesser 1.6 bis 10 mm, _x000D_ (geschlossen) |
| DIN 6792 OFFEN | Semi-tubular rivets with counter sunk, nominal diameter 1.6 to 10 mm (open) |
| DIN 7331 A | Hollow rivets, two-parts, rivets, form A |
| DIN 7331 K | Hollow rivets, head part, form K |
| DIN 7331 AN | Hollow rivets, rivet part, form AN |
| DIN 7331 B | Hollow rivets, two-parts, rivets, form B |
| DIN 7331 BN | Hollow rivets, rivet part, form BN |
| DIN 7337 A | Blind rivets with break mandrel, form A |
| DIN 7337 B | Blind rivets with break mandrel, form B |
| DIN 7338 A | Rivets for brake linings and clutch linings, form A |
| DIN 7338 B | Rivets for brake linings and clutch linings, form B |
| DIN 7338 C1 | Rivets for brake linings and clutch linings, form C1 |
| DIN 7338 C2 | Rivets for brake linings and clutch linings, form C2 |
| DIN 7339 | Tubular rivets (one piece) drawn from strip |
| DIN 7340 A | Tubular rivets, form A |
| DIN 7340 B | Tubular rivets, form B |
| DIN 7341 B | Rivet pins, form B |
| DIN 1 A | Taper pins, form A |
| DIN 1 B | Taper pins, form B |
| DIN 258 | Taper pins with threaded pin |
| DIN 6325 | Parallel pins, hardened, tolerance zone m6 |
| DIN 7 | Parallel pins |
| DIN 7977 | Taper pins with thread and constant threaded part |
| DIN 7978 A | Taper pins with inner thread, no hardened, form A |
| DIN 7978 B | Taper pins with inner thread, no hardened, form B |
| DIN 7979 C | Parallel pins, with internal thread, unhardened, form C |
| DIN 7979 D | Parallel pins, with internal thread, hardened, form D |
| DIN 1481 | Clamping pins |
| DIN 7346 | Clamping pins |
| DIN 94 | Split pins |
| DIN 1433 | Clevis pins without head |
| DIN 1434 A | Clevis pins with small head, without cotter pin hole, form A |
| DIN 1434 B | Clevis pins with small head, with cotter pin hole, form B |
| DIN 1435 | Clevis pins with small head, finish mg |
| DIN 1436 | Clevis pins with large head, finish mg |
| DIN 1443 A | Clevis pins without head, form A |
| DIN 1443 B | Clevis pins without head, form B |
| DIN 1444 A | Clevis pins with head, no cotter pin hole, form A |
| DIN 1444 B | Clevis pins with head, with cotter pin hole, form B |
| DIN 1445 | Clevin pins with head and thread pin |
| DIN 5525 A | Pins without head, form A (without locking hole) |
| DIN 5525 B | Pins without head, form B (without locking hole) |
| DIN 5526 A | Pins with head, form A (without locking hole) |
| DIN 5526 B | Pins with head, form B (without locking hole) |
| DIN 32500-1 P | Studs for drawn arc stud welding, form P |
| DIN 32500-1 KP | Ceramic rings for stud bolts, form KP |
| DIN 32500-2 Z | Studs for drawn arc stud welding, form Z |
| DIN 32500-2 KZ | Ceramic rings for unthreaded studs, form KZ |
| DIN 32500-3 | Studs for drawn arc stud welding, concrete anchor and shear connectors |
| DIN 32500-4 | Studs for drawn arc stud welding, T-studs |
| DIN 32500-5 | Studs for drawn arc stud welding |
| DIN 32501-2 | Studs for stud welding with tip ignition, unthreaded studs |
| DIN 32501-5 | Studs for stud welding with tip ignition, studs with internal thread for automatic feed |
| DIN 73125 D | Piston pins for spark-ignited engines, form D |
| DIN 73125 E | Piston pins for spark-ignited engines, form E |
| DIN 1578 | Snap rings for wheel tyres |
| DIN 3760 A | Radial-shaft seals, form A |
| DIN 3760 AS | Radial-shaft seals, form AS |
| DIN 3761-1 B | Rotary shaft lip type seals, form B |
| DIN 3761-1 BS | Rotary shaft lip type seals, form BS |
| DIN 3761-1 C | Rotary shaft lip type seals, form C |
| DIN 3761-1 CS | Rotary shaft lip type seals, form CS |
| DIN 3771-1 | Fluid systems; O-rings |
| DIN 7603 A | Sealing rings, form A, flat gaskets |
| DIN 7603 C | Sealing rings, form C, fill gaskets |
| DIN 7603 D | Sealing rings, form D, convex gaskets |
| DIN 28040 FB | Sealing for vessels and process apparatus, form FB |
| DIN 28040 FS | Sealing for vessels and process apparatus, form FS |
| DIN 6881 | Hollow wedges |
| DIN 6883 | Flat wedges |
| DIN 6884 | Stressed type fastening with taper action |
| DIN 6886 A | Wedges, form A |
| DIN 6886 B | Wedges, form B |
| DIN 6887 | Wedges with nose |
| DIN 6889 | Hollow wedges with nose |
| DIN 6885-1 A | Parallel keys, deep pattern |
| DIN 6885-1 AB | Parallel keys, deep pattern |
| DIN 6885-1 AS | Parallel keys, deep pattern |
| DIN 6885-1 B | Parallel keys, deep pattern |
| DIN 6885-1 BS | Parallel keys, deep pattern |
| DIN 6885-1 ABS | Parallel keys, deep pattern |
| DIN 6885-1 C | Parallel keys, deep pattern |
| DIN 6885-1 CD | Parallel keys, deep pattern |
| DIN 6885-1 D | Parallel keys, deep pattern |
| DIN 6885-1 DS | Parallel keys, deep pattern |
| DIN 6885-1 E | Parallel keys, deep pattern |
| DIN 6885-1 EF | Parallel keys, deep pattern |
| DIN 6885-1 EoS | Parallel keys, deep pattern |
| DIN 6885-1 F | Parallel keys, deep pattern |
| DIN 6885-1 FoS | Parallel keys, deep pattern |
| DIN 6885-1 G | Parallel keys, deep pattern |
| DIN 6885-1 H | Parallel keys, deep pattern |
| DIN 6885-1 J | Parallel keys, deep pattern |
| DIN 6885-2 A | Parallel keys, deep pattern for machine tool |
| DIN 6885-2 C | Parallel keys, deep pattern for machine tool |
| DIN 6885-2 E | Parallel keys, deep pattern for machine tool |
| DIN 6885-2 EoS | Parallel keys, deep pattern for machine tool |
| DIN 6885-3 A | Parallel keys, low pattern |
| DIN 6885-3 B | Parallel keys, low pattern |
| DIN 6885-3 C | Parallel keys, low pattern |
| DIN 6885-3 E | Parallel keys, low pattern |
| DIN 6885-3 EoS | Parallel keys, low pattern |
| DIN 6880 | Bright key steels |
| DIN 6888 | Spring washers |
| DIN 462 | Internal tab washers |
| DIN 471 | Retaining rings for shafts |
| DIN 472 | Retaining rings for bores |
| DIN 703 | Adjusting rings |
| DIN 705 A | Adjusting rings, form A |
| DIN 705 B | Adjusting rings, form B |
| DIN 705 C | Adjusting rings, form C |
| DIN 981 | Locknuts |
| DIN 983 | Retaining rings with lugs |
| DIN 984 | Retaining rings with lugs |
| DIN 5406 MB | Lockwashers; safety plates |
| DIN 5406 MS | Lockwashers, lockclips |
| DIN 6799 | Retaining washers for shafts |
| DIN 7993 A | Circular wire snap-rings for drills, form A |
| DIN 7993 B | Circular wire snap-rings for drills, form B |
| DIN 15414 | Bottom hook blocks, nut lecking devices for cranes |
| DIN 9925 | Circular wire snap rings for shafts |
| DIN 9926 | Circular wire snap-rings for drills |
| DIN 9927 | Snap rings with rectangular profile for shafts |
| DIN 6367 | Cutter retaining screws for milling machine arbors |
| DIN 1498 EG | Tension bushes without countersink E with straight slot G |
| DIN 1498 EP | Tension bushes without countersink E with arrow shaped slot P |
| DIN 1498 ES | Tension bushes without countersink E with inclined slot S |
| DIN 1498 EW | Tension bushes without countersink E with wavy slot W |
| DIN 1498 FG | Tension bushes with countersink F with straight slot G |
| DIN 1498 FP | Tension bushes with countersink F with arrow shaped slot P |
| DIN 1498 FS | Tension bushes with countersink F with inclined slot S |
| DIN 1498 FW | Tension bushes with countersink F with wavy slot W |
| DIN 1499 AG | Tension bush with countersink A with straight slot G |
| DIN 1499 AP | Tension bushes with countersink A with arrow shaped slot P |
| DIN 1499 AS | Tension bushes with countersink A with inclined slot S |
| DIN 1499 AW | Tension bushes with countersink A with wavy slot W |
| DIN 1552-1 B | Bushes for railway vehicles - Part 1: Press-fit bushes of steel, form B |
| DIN 1552-1 BA | Bushes for railway vehicles - Part 1: Press-fit bushes of steel, form BA |
| DIN 1552-1 C | Bushes for railway vehicles - Part 1: Press-fit bushes of steel, form C |
| DIN 1552-1 CA | Bushes for railway vehicles - Part 1: Press-fit bushes of steel, form CA |
| DIN 1552-2 D | Bushes for railway vehicles - Part 2: Press-fit bushes of steel |
| DIN 16903-1 A | Open insert nuts for plastics mouldings, form A |
| DIN 16903-1 B | Open insert nuts for plastics mouldings, form B |
| DIN 16903-1 C | Open insert nuts for plastics mouldings, form C |
| DIN 16903-1 D | Open insert nuts for plastics mouldings, form D |
| DIN 16903-2 E | Closed insert nuts with disk for plastics mouldings, form E |
| DIN 16903-2 F | Closed insert nuts with disk for plastics mouldings, form F |
| DIN 16903-2 G | Closed insert nuts with disk for plastics mouldings, form G |
| DIN 16903-2 H | Closed insert nuts with disk for plastics mouldings, form H |
| DIN 16903-3 P | Closed insert nuts with dead hole for plastics mouldings, form P |
| DIN 16903-3 Q | Closed insert nuts with dead hole for plastics mouldings, form Q |
| DIN 16903-3 R | Closed insert nuts with dead hole for plastics mouldings, form R |
| DIN 16903-3 S | Closed insert nuts with dead hole for plastics mouldings, form ´S |
| DIN 16903-4 T | Insert nuts, heavy type for plastics mouldings and pressure die castings, form T |
| DIN 16903-4 U | Insert nuts, heavy type for plastics mouldings and pressure die castings, form U |
| DIN 172 A | Press fitting bushes |
| DIN 172 B | Press fitting bushes |
| DIN 173-1 K | Plug drill bushings |
| DIN 173-2 E | Renewable jig bushes, form E |
| DIN 173-2 ER | Renewable jig bushes, form ER |
| DIN 173-2 ES | Renewable jig bushes, form ES |
| DIN 173-2 G | Renewable jig bushes, form G |
| DIN 173-2 H | Renewable jig bushes, form H |
| DIN 173-2 K | Head cap bolts, form K |
| DIN 173-1 KL | Plug drill bushings |
| DIN 173-1 L | Plug drill bushings |
| DIN 173-1 | Flat headed screws |
| DIN 173 | Clamping bushings |
| DIN 179 A | Drill bushings |
| DIN 179 B | Drill bushings |
| DIN 6371 | Captive C-washers for apparatuses |
| DIN 1864 | Core drills with Morse taper shank, long series, for the use in jig bushes |
| DIN 222 | Shell drills |
| DIN 343 | Core drills with Morse taper shank |
| DIN 344 | Core drills with parallel shank |
| DIN 8022 | Shell core drills with hard metal tips |
| DIN 8043 | Core drills with carbide tips |
| DIN 8010 | Carbide tips for drills; tip angle 115° for major service loads |
| DIN 8011 | Carbide tips for reamers, counterbores and shank-type cutters, Type R |
| DIN 8011 | Carbide tips for reamers, counterbores and shank-type cutters, Type T |
| DIN 8013 | Carbide tips for drills; tip angle 85° for minor service loads |
| DIN 338 | Parallel shank twist drills, jobber series |
| DIN 339 | Parallel shank twist drills for use in jig bushes |
| DIN 340 | Parallel shank twist drills, long series |
| DIN 1869 | Parallel shank twist drills, extra long series |
| DIN 1897 | Parallel shank twist drills, stub series |
| DIN 1898-1 | Taper pin hole drills - Part 1: Pin hole drills with parallel shank |
| DIN 1899 | Micro-precision drills |
| DIN 341 | Morse taper shank twist drills for use in jig bushes, long series |
| DIN 345 | Morse taper shank twist drills |
| DIN 346 | Morse taper shank twist drills, oversize shank |
| DIN 1870 | Morse taper shank twist drills, extra long series |
| DIN 1898-2 | Taper pin hole drills - Part 2: Pin hole drills with Morse taper shank |
| DIN 6537 A | Solid-hardmetal twist drills with stepped parallel shank, form A |
| DIN 6537 B | Solid-hardmetal twist drills with stepped parallel shank, form B |
| DIN 6537 C | Solid-hardmetal twist drills with stepped parallel shank, form C |
| DIN 6538-1 A | Twist drills with hardmetall cutting edges with reinforced parallel shank, form A |
| DIN 6538-1 B | Twist drills with hardmetall cutting edges with reinforced parallel shank, form B |
| DIN 6539 | Solid-hardmetal twist drills with continuous parallel shank |
| DIN 8037 | Twist drills with parallel shank with carbide tips |
| DIN 8038 | Twist drills with parallel shank with carbide tips for drilling plastics (thermosetting plastics) |
| DIN 8041 | Twist drills with morse taper shank with carbide tips |
| DIN 1861 | Twist drills for jig boring machines |
| DIN 8039 | Parallel shank rock drills with carbide tip |
| DIN 8374 A | Subland twist drills with parallel shank for clearance holes and countersinks for countersunk head screws, form A |
| DIN 8374 B | Subland twist drills with parallel shank for clearance holes and countersinks for countersunk head screws, form B |
| DIN 8375 | Subland twist drills with Morse taper shank for clearance holes and countersinks for countersunk head screws |
| DIN 8376 | Subland twist drills with parallel shank for clearance holes and counterbores for hexagon socket head cap screws and slotted cheese head screws |
| DIN 8377 | Subland twist drills with Morse taper shank for clearance holes and counterbores for hexagon socket head cap screws and slotted cheese head screws |
| DIN 8378 | Subland twist drills with parallel shank for holes prior to tapping screw threads |
| DIN 8379 | Subland twist drills with Morse taper shank for holes prior to tapping screw threads |
| DIN 333 A | Centre drills 60°, form A |
| DIN 333 B | Centre drills 60°, form B |
| DIN 333 R | Centre drills 60°, form R |
| DIN 4951 L | Straight turning tools with high speed steel tips, form L left straight turning tool |
| DIN 4951 R | Straight turning tools with high speed steel tips, form R right straight turning tool |
| DIN 4952 L | Bent turning tools with high speed steel tips, form L left bent turning tool |
| DIN 4952 R | Bent turning tools with high speed steel tips, form R right bent turning tool |
| DIN 4953 | Boring tools with high speed steel tips |
| DIN 4954 | Internal side turning tools for corner work with high speed steel tips |
| DIN 4955 | Straight turning tools with high speed steel tips |
| DIN 4956 | Wide face square nase tools with high speed steel tips |
| DIN 4960 L | Offset side turning tools with high speed steel tips, form L left offset side turning tool |
| DIN 4960 R | Offset side turning tools with high speed steel tips, form R right offset side turning tool |
| DIN 4961 L | Parting-off tools with high speed steel tips, form L left parting-off tool |
| DIN 4961 R | Parting-off tools with high speed steel tips, form R right parting-off tool |
| DIN 4963 L | Right angle parting-off tools with high speed steel tips, form L left right angle parting-off tool |
| DIN 4963 R | Right angle parting-off tools with high speed steel tips, form R right right angle parting-off tool |
| DIN 4965 L | Bent tools for corner work with high speed steel tips, form L left bent tool for corner work |
| DIN 4965 R | Bent tools for corner work with high speed steel tips, form R right bent tool for corner work |
| DIN 4971 L | Straight turning tools with carbide tips, form L left straight turning tool |
| DIN 4971 R | Straight turning tools with carbide tips, form R right straight turning tool |
| DIN 4972 L | Bent turning tools with carbide tips, form L left bent turning tool |
| DIN 4972 R | Bent turning tools with carbide tips, form R right bent turning tool |
| DIN 4973 | Boring tools with carbide tips |
| DIN 4974 | Internal side turning tools for corner work with carbide tips |
| DIN 4975 | Pointed straight turning tools with carbide tips |
| DIN 4976 | Wide face square nase tools with carbide tips |
| DIN 4977 L | Offset face turning tools with carbide tips, form L left offset face turning tool |
| DIN 4977 R | Offset face turning tools with carbide tips, form R right offset face turning tool |
| DIN 4978 L | Offset turning tools for corner work with carbide tips, form L left offset turning tool for corner work |
| DIN 4978 R | Offset turning tools for corner work with carbide tips, form R right offset turning tool for corner work |
| DIN 4980 L | Offset side turning tools with carbide tips, form L left offset side turning tool |
| DIN 4980 R | Offset side turning tools with carbide tips, form R right offset side turning tool |
| DIN 4981 L | Parting-off tools with carbide tips, form L left parting-off tool |
| DIN 4981 R | Parting-off tools with carbide tips, form R right parting-off tool |
| DIN 1530-1 A | Ejector pins with cylindrical head |
| DIN 1530-2 C | Shouldered ejector pins with cylindrical head |
| DIN 1530-3 D | Ejector pins with conical head |
| DIN 1530-4 F | Ejector pins with cylindrical head, with rectangular reduced shank (flat ejector pins) |
| DIN 16716 C | Guide bushes of steel, form C |
| DIN 16716 E | Guide bushes of steel, form E |
| DIN 16752 C | Sprue bushes, form C |
| DIN 16752 D | Sprue bushes, form D |
| DIN 16756 | Ejector sleeves with cylindrical head |
| DIN 16757 | Sprue puller |
| DIN 16759 | Centering sleeves |
| DIN 16761 A | Guide pillars, form A |
| DIN 16761 B | Guide pillars, form B |
| DIN 1823-1 A | Angular cutters for toolmaking, form A |
| DIN 1823-1 B | Angular cutters for toolmaking, form B |
| DIN 1824 A | Tool-making angular cutters for tools with relieved teeth, form A |
| DIN 1824 B | Tool-making angular cutters for tools with relieved teeth, form B |
| DIN 1831-1 | Side and face milling cutters with inserted cutting blades |
| DIN 1834-1 A | Narrow side and face milling cutters, form A |
| DIN 1834-1 B | Narrow side and face milling cutters, form B |
| DIN 1880 | Shell end mills with tenon and parallel key drive |
| DIN 1890-1 | Slotting cutters with straight teeth |
| DIN 1891-1 A | Slotting cutters, interlocking and adjustable, form A |
| DIN 1891-1 B | Slotting cutters, interlocking and adjustable, form B |
| DIN 1892-1 | Interlocking two parts cylindrical cutters |
| DIN 1893-1 | Disc type thread milling cutters for ISO metric trapezoidal threads |
| DIN 6513-1 | Concav corner rounding cutters |
| DIN 8031 | Side and face milling (sloatting) cutters for indexable inserts |
| DIN 8047 A | Side milling cutters, carbide-tipped, form A |
| DIN 8047 B | Side milling cutters, carbide-tipped, form B |
| DIN 8048 | Side milling cutters with exchangeable blades, hard material cutting edges |
| DIN 8056 | Shell end cylindrical milling cutters with tenon drive, with carbide tips |
| DIN 842-1 A | Angular cutters with plain bore, form A |
| DIN 847 | Double equal-angle milling cutters |
| DIN 852-1 | Shell type thread milling cutters for ISO metric threads |
| DIN 855 A | Semi-circular profile milling cutters, concave, form A |
| DIN 855 B | Semi-circular profile milling cutters, concave, form B |
| DIN 856 | Convex milling cutters |
| DIN 884-1 | Solid cylindrical cutters |
| DIN 885-1 A | Side and face milling cutters, form A |
| DIN 885-1 B | Side and face milling cutters, form B |
| DIN 885 A | Side and face milling cutters, form A |
| DIN 885 B | Side and face milling cutters, form B |
| DIN 885 C | Side and face milling cutters, form C |
| DIN 885 D | Side and face milling cutters, form D |
| DIN 885 E | Side and face milling cutters, form E |
| DIN 885 F | Side and face milling cutters, form F |
| DIN 1830-1 EB | Inserted blade face milling cutters for internal alignment on spindle-noses according to DIN 2079, form EB |
| DIN 1830-1 PB | Inserted blade face milling cutters for internal alignment on spindle-noses according to DIN 2079, form PB |
| DIN 1830-3 EC | Inserted blade face milling cutters for milling machine arbors according to DIN 6361 and DIN 6362, form EC |
| DIN 1830-3 PC | Inserted blade face milling cutters for milling machine arbors according to DIN 6361 and DIN 6362, form PC |
| DIN 1830-4 ED | Inserted blade face milling cutters for internal alignment for combined mounting on spindle-noses No. 50 and 60 according to DIN 2079, form ED |
| DIN 1830-4 PD | Inserted blade face milling cutters for internal alignment for combined mounting on spindle-noses No. 50 and 60 according to DIN 2079, form PD |
| DIN 8030 A | Face milling cutters for indexable inserts, form A |
| DIN 8030 B | Face milling cutters for indexable inserts, form B |
| DIN 8030 C | Face milling cutters for indexable inserts, form C |
| DIN 8033-2 ZYA | Hard metal burrs, cylindrical burrs, form ZYA |
| DIN 8033-3 WRC | Hard metal burrs, cylindrical round nose burrs, form WRC |
| DIN 8033-4 SKM | Hard metal burrs, conical pointed nose, form SKM |
| DIN 8033-5 KEL | Hard metal burrs, conical round nose burrs, form KEL |
| DIN 8033-6 KSJ | Hard metal burrs, 60 degree cone burrs, form KSJ |
| DIN 8033-6 KSK | Hard metal burrs, 90 degree cone burrs, form KSK |
| DIN 8033-7 WKN | Hard metal burrs, inverted cone burrs, form WKN |
| DIN 8033-8 KUD | Hard metal burrs, spherical burrs, form KUD |
| DIN 8033-9 SPG | Hard metal burrs, arch pointed nose burrs, form SPG |
| DIN 8033-10 RBF | Hard metal burrs, arch round nose burrs, form RBF |
| DIN 8033-12 TRE | Hard metal burrs, oval burrs, form TRE |
| DIN 1889-2 C | Die-sinking cutters with Morse taper shank, form C |
| DIN 1889-2 D | Die-sinking cutters with Morse taper shank, form D |
| DIN 2185 | Reduction sleeves for tools with morse taper shanks |
| DIN 326-1 C | Slotting drills with Morse taper shank, form C |
| DIN 326-1 D | Slotting drills with Morse taper shank, form D |
| DIN 326-1 E | Slotting drills with Morse taper shank, form E |
| DIN 326-1 F | Slotting drills with Morse taper shank, form F |
| DIN 6327-1 D | Adjustable adaptors for tools short build |
| DIN 6327-1 E | Adjustable adaptors for tools short build with sinking and bore |
| DIN 6327-2 F | Adjustable adaptors for tools long build |
| DIN 6327-2 G | Adjustable adaptors for tools long build with sinking and bore |
| DIN 6327-3 H | Adjustable adaptors with tools groove, deduced build |
| DIN 6327-4 | Adjustable adaptors for tools groove nut and clamp nut |
| DIN 6328-1 A | Taper chucks for parallel shank for tools with DIN-driving squares |
| DIN 6328-2 B | Taper chucks for parallel shank for tools with DIN-driving squares |
| DIN 6328-3 C | Taper chucks for parallel shank for tools with DIN-driving squares |
| DIN 6329 | Sockets for parallel shank tools with driving tenons |
| DIN 8026 | Slotting end mills with Morse taper shank with carbide tips |
| DIN 8045 | End mills with Morse taper shank with hard metal tips |
| DIN 8096-2 | End mills type A for indexable inserts with Morse taper shanks |
| DIN 845-1 B | End mills with Morse taper shank, form B |
| DIN 845-1 C | End mills with Morse taper shank, form C |
| DIN 851-2 B | T-slot cutters with Morse taper shank, form B |
| DIN 2328 | End mills with 7/24 taper shank |
| DIN 2328-1 | End mills with 7/24 taper shank |
| DIN 1833-1 A | Dovetail cutters with parallel shank, form A |
| DIN 1833-1 B | Dovetail cutters with parallel shank, form B |
| DIN 1833-1 C | Dovetail cutters with parallel shank, form C |
| DIN 1833-1 D | Dovetail cutters with parallel shank, form D |
| DIN 1833-1 E | Dovetail cutters with parallel shank, form E |
| DIN 1833-1 F | Dovetail cutters with parallel shank, form F |
| DIN 1833-1 G | Dovetail cutters with parallel shank, form G |
| DIN 1833-1 H | Dovetail cutters with parallel shank, form H |
| DIN 1889-1 AA | Die-sinking cutters with parallel shank, form AA |
| DIN 1889-1 AB | Die-sinking cutters with parallel shank, form AB |
| DIN 1889-1 AD | Cylindrical die-sinking cutters with parallel shank, form AD |
| DIN 1889-1 AE | Cylindrical die-sinking cutters with parallel shank, form AE |
| DIN 1889-1 BA | Cylindrical die-sinking cutters with parallel shank, form BA |
| DIN 1889-1 BB | Cylindrical die-sinking cutters with parallel shank, form BB |
| DIN 1889-1 BD | Cylindrical die-sinking cutters with parallel shank, form BD |
| DIN 1889-1 BE | Cylindrical die-sinking cutters with parallel shank, form BE |
| DIN 1889-3 EA | Tapered cylindrical die-sinking cutters with parallel shank, form EA |
| DIN 1889-3 EB | Tapered cylindrical die-sinking cutters with parallel shank, form EB |
| DIN 1889-3 ED | Tapered cylindrical die-sinking cutters with parallel shank, form ED |
| DIN 1889-3 EE | Tapered cylindrical die-sinking cutters with parallel shank, form EE |
| DIN 1889-3 FA | Tapered cylindrical die-sinking cutters with parallel shank, form FA |
| DIN 1889-3 FB | Tapered cylindrical die-sinking cutters with parallel shank, form FB |
| DIN 1889-3 FD | Tapered cylindrical die-sinking cutters with parallel shank, form FD |
| DIN 1889-3 FE | Tapered cylindrical die-sinking cutters with parallel shank, form FE |
| DIN 327-1 A | Parallel shank slot drills, form A |
| DIN 327-1 B | Parallel shank slot drills, form B |
| DIN 327-1 C | Parallel shank slot drills, form C |
| DIN 327-1 D | Parallel shank slot drills, form D |
| DIN 327-1 G | Parallel shank slot drills, form G |
| DIN 327-1 H | Parallel shank slot drills, form H |
| DIN 327-1 J | Parallel shank slot drills, form J |
| DIN 327-1 K | Parallel shank slot drills, form K |
| DIN 6518-1 A | Corner-rounding cutters with parallel shank, form A |
| DIN 6518-1 B | Corner-rounding cutters with parallel shank, form B |
| DIN 6518-1 D | Corner-rounding cutters with parallel shank, form D |
| DIN 6518-1 E | Corner-rounding cutters with parallel shank, form E |
| DIN 6527 A | Solid hardmetal end mills with stepped parallel shank, form A |
| DIN 6527 B | Solid hardmetal end mills with stepped parallel shank, form B |
| DIN 6527 C | Solid hardmetal end mills with stepped parallel shank, form C |
| DIN 6528 | Solid hardmetal end mills with continuous parallel shank |
| DIN 69844-1 A | ANS-end mills with parallel shank, form A |
| DIN 69844-1 B | ANS-end mills with parallel shank, form B |
| DIN 69844-1 D | ANS-end mills with parallel shank, form D |
| DIN 69844-1 E | ANS-end mills with parallel shank, form E |
| DIN 8027 A | Slotting end mills with parallel shanks with carbide tips, form A |
| DIN 8027 B | Slotting end mills with parallel shanks with carbide tips, form B |
| DIN 8044 A | End mills with parallel shanks with hardmetal tips, form A |
| DIN 8044 B | End mills with parallel shanks with hardmetal tips, form B |
| DIN 8096-1 | End mills type A for indexable inserts with parallel shanks |
| DIN 844-1 A | End mills with parallel shank, form A |
| DIN 844-1 B | End mills with parallel shank, form B |
| DIN 844-1 D | End mills with parallel shank, form D |
| DIN 844-1 E | End mills with parallel shank, form E |
| DIN 850-1 A | Woodruff keyseat cutters, form A |
| DIN 850-1 B | Woodruff keyseat cutters, form B |
| DIN 850-1 C | Woodruff keyseat cutters, form C |
| DIN 850-1 D | Woodruff keyseat cutters, form D |
| DIN 850-1 E | Woodruff keyseat cutters, form E |
| DIN 850-1 F | Woodruff keyseat cutters, form F |
| DIN 850-1 G | Woodruff keyseat cutters, form G |
| DIN 850-1 H | Woodruff keyseat cutters, form H |
| DIN 851-1 AA | T-slot cutters with parallel shanks, form AA |
| DIN 851-1 AB | T-slot cutters with parallel shanks, form AB |
| DIN 851-1 AD | T-slot cutters with parallel shanks, form AD |
| DIN 851-1 AE | T-slot cutters with parallel shanks, form AE |
| DIN 851 AA | T-slot cutters with parallel shanks, form AA |
| DIN 851 AB | T-slot cutters with parallel shanks, form AB |
| DIN 851 AD | T-slot cutters with parallel shanks, form AD |
| DIN 851 AE | T-slot cutters with parallel shanks, form AE |
| DIN 1814 | Tap wrenches, jaws movable |
| DIN 2181 | Screwing taps in sets, set of two for fine pitch metric ISO-threads from M1 to M52 |
| DIN 223-1 A | Circular screwing dies for ISO metric coarse thread M1 to M68, form A |
| DIN 223-1 B | Circular screwing dies for ISO metric coarse thread M1 to M68, form B |
| DIN 223-3 A | Circular screwing dies for fine pitch metric ISO-threads M1 to M68, form A |
| DIN 223-3 B | Circular screwing dies for fine pitch metric ISO-threads M1 to M68, form B |
| DIN 225 | Die stock |
| DIN 352 | Screwing taps in sets, set of three, for coarse pitch metric ISO-threads from M1 to M68 |
| DIN 353 | Set of taps in two Whitworth pipe thread R 1 / 8''to''R4 |
| DIN 357 | Nuts taps for metric ISO-threads from M3 to M68 |
| DIN 371 | Machine taps with reinforced shank; for coarse pitch metric ISO-threads from M1 to M10 |
| DIN 374 | Machine screwing taps, for fine pitch metric ISO-threads from M1.6 to M52 |
| DIN 376 | Machine screwing taps, for coarse pitch metric ISO-threads from M1,6 to M68 |
| DIN 5159 A | Circular screwing dies for taper pipe threads R1/16 to R2, form A |
| DIN 5159 B | Circular screwing dies for taper pipe threads R1/16 to R2, form B |
| DIN 2221 | Taper plug gauges for taper sleeve for drill chucks |
| DIN 2222 | Taper ring gauges for taper shafts for drill chucks |
| DIN 2231 | Limit gap gauges and forged gauging members over 3 mm up to 100 mm nominal size |
| DIN 2231 R | Limit gap gauges and forged gauging members over 3 mm up to 100 mm nominal size |
| DIN 2232 | Gap gauges "GO" with forged gauging member over 3 mm up to 100 mm nominal size |
| DIN 2233 | Gap gauges "NOT GO" with forged gauging member over 3 mm up to 100 mm nominal size |
| DIN 2240-1 R | Handles, form R |
| DIN 2240-1 S | Handles, form S |
| DIN 2240-2 GD | Handles, form GD |
| DIN 2240-2 GDK | Handles, form GDK |
| DIN 2240-2 GE | Handles, form GE |
| DIN 2240-2 GEK | Handles, form GEK |
| DIN 2240-2 K-1 | Handles, clamping pieces K for pass dimension |
| DIN 2240-2 K | Handles, clamping pieces K for pass dimension |
| DIN 2240-2 | Handles, Head capbolts with hexagon socket |
| DIN 2241 | Screw setting gauges for measuring instruments for metric screw threads; setting plug gauges and setting ring gauges from 1 mm to 100 mm nominal thread diameter |
| DIN 2241 R | Screw setting gauges for measuring instruments for metric screw threads; setting plug gauges and setting ring gauges from 1 mm to 100 mm nominal thread diameter, form R |
| DIN 2241 | Screw setting gauges for measuring instruments for metric screw threads; setting plug gauges and setting ring gauges from 1 mm to 100 mm nominal thread diameter |
| DIN 2241 S | Screw setting gauges for measuring instruments for metric screw threads; setting plug gauges and setting ring gauges from 1 mm to 100 mm nominal thread diameter, form S |
| DIN 2245-1 Z | """GO"" and ""NOT GO"" plug gauges for holes from 1 mm up to 40 mm nominal diameter, form Z" |
| DIN 2245-1 RV | """GO"" and ""NOT GO"" plug gauges for holes from 1 mm up to 40 mm nominal diameter, form RV" |
| DIN 2245-1 RZ | """GO"" and ""NOT GO"" plug gauges for holes from 1 mm up to 40 mm nominal diameter, form RZ" |
| DIN 2245-1 V | """GO"" and ""NOT GO"" plug gauges for holes from 1 mm up to 40 mm nominal diameter, form V" |
| DIN 2245-2 RZ | Limit plug gauges for holes up 40 mm up to 65 mm nominal diameter, form RZ |
| DIN 2246-1 RZ | "GO" plug gauges for holes from 1 mm up to 40 mm nominal diameter |
| DIN 2246-1 SZ | "GO" plug gauges for holes from 1 mm up to 40 mm nominal diameter, form SZ |
| DIN 2246-2 FG | "GO" plug gauges for holes over 120 mm up to 200 mm nominal diameter, form FG |
| DIN 2246-3 ZG | "GO" plug gauges for holes over 40 mm up to 120 mm nominal diameter, form ZG |
| DIN 2247-1 | "NOT GO" plug gauges for holes from 1 mm up to 40 mm nominal diameter |
| DIN 2247-1 | "NOT GO" plug gauges for holes from 1 mm up to 40 mm nominal diameter, form SZ |
| DIN 2247-3 ZA | "NOT GO" plug gauges with cylindrical gauging member for holes over 40 mm up to 120 mm nominal diameter, form ZA |
| DIN 2247-4 FA | "NOT GO" plug gauges, with segmental zylindrical gauging member over 120 mm up to 200 mm nominal diameter , form FA |
| DIN 2248-1 Z | """GO"" Gauging members, for holes from 1mm up to 40mm nominal diameter, form Z" |
| DIN 2248-2 ZG | "GO" gauging members for holes over 40 mm up to 120 mm nominal diameter, form ZG |
| DIN 2248-3 FG | "GO" gauging members for holes over 120 mm up to 200 mm nominal diameter, form FG |
| DIN 2249-1 V | """NOT GO"" gauging members, for holes above 5 mm up to 40 mm nominal diameter, form V" |
| DIN 2249-1 Z | """NOT GO"" gauging members, for holes from 1 mm up to 40 mm nominal diameter, form Z" |
| DIN 2249-2 S | "Spherical ""NOT GO"" gauging members, for holes over 40 mm up to 500 mm nominal diameter, form S" |
| DIN 2249-3 FA | "NOT GO" gauging members, segmental zylindrical plug members for holes over 120 mm up to 200 mm nominal diameter , form FA |
| DIN 2249-4 ZA | """NOT GO"" gauging members for holes over 40 mm up to 120 mm nominal diameter cylindrical plug gauges, form ZA" |
| DIN 2250-1 | GO ring gauges and setting ring gauges - Part 1: From 1 mm bis 315 mm nominal diameter |
| DIN 2253 | Reference gauges for gap gauges from 1 mm to 315 mm nominal size |
| DIN 2254-1 A | "NOT GO" ring gauges- Part 1: Nominal diameter from 1 mm to 315 mm |
| DIN 2269 | Cylindrical measuring pins |
| DIN 2269 | Thread pins |
| DIN 2275 | Feeler gauges |
| DIN 2275 | Feeler gauges |
| DIN 2280 R | """GO"" and ""NOT GO"" screw plug gauges for ISO general purpose metric screw threads from 1 mm up to 40 mm nominal diameter, form R" |
| DIN 2280 S | """GO"" and ""NOT GO"" screw plug gauges for ISO general purpose metric screw threads from 1 mm up to 40 mm nominal diameter, form S" |
| DIN 2281-1 R | "GO" screw plug gauges - Part 1: "GO" workshop gauges, check and setting plug gauges for ISO general purpose metric screw threads from 1 mm up to 40 mm nominal diameter, form R |
| DIN 2281-1 S | "GO" screw plug gauges - Part 1: "GO" workshop gauges, check and setting plug gauges for ISO general purpose metric screw threads from 1 mm up to 40 mm nominal diameter, form S |
| DIN 2282-1 | "GO" screw gauging members - Part 1: "GO" workshop gauges, reference and setting gauges for ISO general purpose metric screw threads from 1 mm up to 40 mm nominal diameter |
| DIN 2282-2 | "GO" screw gauging members - Part 2: "GO" workshop gauges, reference and setting gauging members for ISO general purpose metric screw threads over 40 mm up to 200 mm nominal diameter |
| DIN 2283-1 R | "NOT GO" screw plug gauges - Part 1: "NOT GO" workshop gauges, rcheck and setting plug gauges for ISO general purpose metric screw threads from 1 mm up to 40 mm nominal diameter, form R |
| DIN 2283-1 S | "NOT GO" screw plug gauges - Part 1: "NOT GO" workshop gauges, rcheck and setting plug gauges for ISO general purpose metric screw threads from 1 mm up to 40 mm nominal diameter, form S |
| DIN 2283-2 | "NOT GO" screw plug gauges - Part 2: "NOT GO" workshop gauges, check and setting plug gauges for ISO general purpose metric screw threads over 40 mm up to 200 mm nominal diameter |
| DIN 2284-1 | """NOT GO"" screw gauging members" |
| DIN 2284-2 | "NOT GO" screw gauging members - Part 2: "NOT GO" workshop gauges, reference and setting gauges for ISO general purpose metric screw threads over 40 mm up to 200 mm nominal diameter |
| DIN 2285-1 | "GO" screw ring gauges for ISO metric screw thread - Part 1: Nominal diameter from 1 mm up to 200 mm, general purpse |
| DIN 2299-1 A | "NOT GO" screw ring gauges for metric screw threads - Part 1: Nominal diameter from 1 mm up to 200 mm, general purpose |
| DIN 229-1 | Morse taper gauges; taper plug gauges |
| DIN 229-2 | Morse taper gauges; taper ring gauges |
| DIN 230-1 | Morse taper gauges; taper plug gauges for taper sockets with drift slot |
| DIN 230-2 | Morse taper gauges; taper ring gauges for taper shanks with drift tang |
| DIN 234-1 | Metric taper gauges; taper plug gauges |
| DIN 234-2 | Metic taper gauges; taper ring gauges |
| DIN 235-1 | Metric taper gauges; taper plug gauges for taper sockets with drift slot |
| DIN 235-2 | Metric taper gauges; taper ring gauges for taper shanks with drift tang |
| DIN 40401-1 | Gauges for Edison thread for D-type fuses "Go" ring gauges |
| DIN 40401-2 Gd | "Go" and "Not GO" plug gauges for D-type fuses |
| DIN 40401-2 Gk | "Go" and "Not GO" plug gauges for D-type fuses |
| DIN 9 A | Hand taper pin reamers, form A straight fluted |
| DIN 9 B | Hand taper pin reamers, form B swirl fluted with swerve to the left |
| DIN 204 A | Hand reamers for Morse tapers, form A straight fluted |
| DIN 204 B | Hand reamers for Morse tapers, form B swirl fluted with swerve to the left |
| DIN 208 A | Machine reamers with Morse taper shank, form A straight fluted |
| DIN 208 B | Machine reamers with Morse taper shank, form B swirl fluted |
| DIN 208 C | Machine reamers with Morse taper shank, form C peeling |
| DIN 209 A | Machine reamers with insert blades, Form A straight fluted reamer |
| DIN 209 B | Machine reamers with insert blades, Form B obliquely fluted reamer |
| DIN 311 | Machine bridge reamers with Morse taper, swirl fluted with swerve to the left |
| DIN 1895 C | Machine reamers for Morse tapers, form C swirl fluted finish reamer with swerve to the left |
| DIN 1895 D | Machine reamers for Morse tapers, form D swirl fluted before reamer with swerve to the left |
| DIN 1895 E | Machine reamers for Morse tapers, form E straight fluted |
| DIN 2180 | Machine taper pin reamers with Morse taper shank, swirl fluted with swerve to the left |
| DIN 8051 A | Machine reamers for Morse taper shank with carbide tips with short cutting part, form A straight fluted |
| DIN 8051 B | Machine reamers for Morse taper shank with carbide tips with short cutting part, form B diagonally slotted |
| DIN 8094 A | Machine reamers for Morse taper shank with carbide tips with long cutting part, form A straight fluted |
| DIN 8094 B | Machine reamers for Morse taper shank with carbide tips with long cutting part, form B diagonally slotted |
| DIN 1896 C | Machine reamers for metric tapers, form C swirl fluted finish reamer with swerve to the left |
| DIN 1896 D | Machine reamers for metric tapers, form D swirl fluted before reamer with swerve to the left |
| DIN 1896 E | Machine reamers for metric tapers, form E straight fluted |
| DIN 205 A | Hand reamers for metric tapers, form A straight fluted |
| DIN 205 B | Hand reamers for metric tapers, form B swirl fluted with swerve to the left |
| DIN 206 A | Hand reamers, form A straight fluted |
| DIN 206 B | Hand reamers, form B swirl fluted with swerve to the left |
| DIN 212-1 A | Machine-reamers with parallel shank; continuous shank, form A straight fluted |
| DIN 212-1 B | Machine-reamers with parallel shank; continuous shank, form B swirl fluted |
| DIN 212-2 C | Machine-reamers with parallel shank; stepped shanks, form C straight fluted |
| DIN 212-2 D | Machine-reamers with parallel shank; stepped shanks, form D swirl fluted |
| DIN 212-2 E | Machine-reamers with parallel shank; stepped shanks, form E peeling |
| DIN 2179 | Machine taper pin reamers with parallel shanks, swirl fluted with swerve to the left |
| DIN 8050 A | Machine-reamers with parallel shanks with carbide tips with short cutting part, form A straight fluted |
| DIN 8050 B | Machine-reamers with parallel shanks with carbide tips with short cutting part, form B diagonally slotted |
| DIN 8093 A | Machine reamers with parallel shanks with carbide tips with long cutting part, form A straight fluted |
| DIN 8093 B | Machine reamers with parallel shanks with carbide tips with long cutting part, form B diagonally slotted |
| DIN 859 A | Hand reamers with parallel shanks - adjustable, slotted, form A straight fluted |
| DIN 859 B | Hand reamers with parallel shanks - adjustable, slotted, form B swirl fluted |
| DIN 219 A | Shell reamers, form A straight fluted reamer |
| DIN 219 B | Shell reamers, form B swirl fluted reamer |
| DIN 219 C | Shell reamers, form C Peeling reamer |
| DIN 220 A | Shell reamers with inserted blades, Form A straight fluted reamer |
| DIN 220 B | Shell reamers with inserted blades, form B grooved reamers |
| DIN 8054 | Shell reamers with carbide tips |
| DIN 8089 A | Stub reamers, form A straight fluted |
| DIN 8089 B | Stub reamers, form B swirl fluted |
| DIN 8089 C | Stub reamers, form C peeling |
| DIN 8090 A | Stub reamers with hard metall tips, form A straight fluted |
| DIN 8090 B | Stub reamers with hard metall tips, form B diagonally slotted left-handed |
| DIN 8090 C | Stub reamers with hard metall tips, form C diagonally slotted right-handed |
| DIN 6450 C | Pin punches, form C |
| DIN 6450 D | Pin punches, form D |
| DIN 6451 | Cape chisel |
| DIN 6453 | Flat chisel |
| DIN 7353 | Metal marking punches |
| DIN 4950 A | Carbide tips, form A |
| DIN 4950 C | Carbide tips, form C |
| DIN 4950 D | Carbide tips, form D |
| DIN 4950 E | Carbide tips, form E |
| DIN 4950 B | Carbide tips, form B |
| DIN 4966 G | Carbide tips for light cutting operations, form G |
| DIN 4966 H | Carbide tips for light cutting operations, form H |
| DIN 4966 J | Carbide tips for light cutting operations, form J |
| DIN 4967-1 CCMT | Indexable hardmetal inserts with rounded corners, with partly cylindrical hole, 7° normal clearance, form CCMT |
| DIN 4967-1 CCMW | Indexable hardmetal inserts with rounded corners, with partly cylindrical hole, 7° normal clearance, form CCMW |
| DIN 4967-1 DCMT | Indexable hardmetal inserts with rounded corners, with partly cylindrical hole, 7° normal clearance, form DCMT |
| DIN 4967-1 DCMW | Indexable hardmetal inserts with rounded corners, with partly cylindrical hole, 7° normal clearance, form DCMW |
| DIN 4967-1 RCMT | Indexable hardmetal inserts with rounded corners, with partly cylindrical hole, 7° normal clearance, form RCMT |
| DIN 4967-1 RCMW | Indexable hardmetal inserts with rounded corners, with partly cylindrical hole, 7° normal clearance, form RCMW |
| DIN 4967-1 SCMT | Indexable hardmetal inserts with rounded corners, with partly cylindrical hole, 7° normal clearance, form SCMW |
| DIN 4967-1 SCMW | Indexable hardmetal inserts with rounded corners, with partly cylindrical hole, 7° normal clearance, form SCMW |
| DIN 4967-1 TCMT | Indexable hardmetal inserts with rounded corners, with partly cylindrical hole, 7° normal clearance, form TCMT |
| DIN 4967-1 TCMW | Indexable hardmetal inserts with rounded corners, with partly cylindrical hole, 7° normal clearance, form TCMW |
| DIN 4968-1 SNGN | Throwaway carbide indexable inserts for turning, form SNGN |
| DIN 4968-1 SNUN | Throwaway carbide indexable inserts for turning, form SNUN |
| DIN 4968-1 SPGN | Throwaway carbide indexable inserts for turning, form SPGN |
| DIN 4968-1 SPUN | Throwaway carbide indexable inserts for turning, form SPUN |
| DIN 4968-1 TNGN | Throwaway carbide indexable inserts for turning, form TNGN |
| DIN 4968-1 TNUN | Throwaway carbide indexable inserts for turning, form TNUN |
| DIN 4968-1 TPGN | Throwaway carbide indexable inserts for turning, form TPGN |
| DIN 4968-1 TPUN | Throwaway carbide indexable inserts for turning, form TPUN |
| DIN 4968-3 SNAN | Carbide indexable inserts for milling, form SNAN |
| DIN 4968-3 SNCN | Carbide indexable inserts for milling, form SNCN |
| DIN 4968-3 SNEN | Carbide indexable inserts for milling, form SNEN |
| DIN 4968-3 SPAN | Carbide indexable inserts for milling, form SPAN |
| DIN 4968-3 SPCN | Carbide indexable inserts for milling, form SPCN |
| DIN 4968 SNGN | Indexable hardmetal inserts with rounded corners, without fixation hole, form SNGN |
| DIN 4968 SNUN | Indexable hardmetal inserts with rounded corners, without fixation hole, form SNUN |
| DIN 4968 SPGN | Indexable hardmetal inserts with rounded corners, without fixation hole, form SPGN |
| DIN 4968 SPMR | Indexable hardmetal inserts with rounded corners, without fixation hole, form SPMR |
| DIN 4968 SPUN | Indexable hardmetal inserts with rounded corners, without fixation hole, form SPUN |
| DIN 4968 TNGN | Indexable hardmetal inserts with rounded corners, without fixation hole, form TNGN |
| DIN 4968 TNUN | Indexable hardmetal inserts with rounded corners, without fixation hole, form TNUN |
| DIN 4968 TPGN | Indexable hardmetal inserts with rounded corners, without fixation hole, form TPGN |
| DIN 4968 TPMR | Indexable hardmetal inserts with rounded corners, without fixation hole, form TPMR |
| DIN 4968 TPUN | Indexable hardmetal inserts with rounded corners, without fixation hole, form TPUN |
| DIN 4969 A | Ceramic indexable inserts, form A triangular plate without clearance angle |
| DIN 4969 C | Ceramic indexable inserts, form C quadratic plate without clearance angle |
| DIN 4969 E | Ceramic indexable inserts, form E rhombic plate without clearance angle |
| DIN 4988 CNMA | Indexable hardmetal inserts with rounded corners, with cylindrical fixation hole, form CNMA |
| DIN 4988 CNMG | Indexable hardmetal inserts with rounded corners, with cylindrical fixation hole, form CNMG |
| DIN 4988 CNMM | Indexable hardmetal inserts with rounded corners, with cylindrical fixation hole, form CNMM |
| DIN 4988 DNMA | Indexable hardmetal inserts with rounded corners, with cylindrical fixation hole, form DNMA |
| DIN 4988 DNMG | Indexable hardmetal inserts with rounded corners, with cylindrical fixation hole, form DNMG |
| DIN 4988 DNMM | Indexable hardmetal inserts with rounded corners, with cylindrical fixation hole, form DNMM |
| DIN 4988 RNMA | Indexable hardmetal inserts with rounded corners, with cylindrical fixation hole, form RNMA |
| DIN 4988 RNMG | Indexable hardmetal inserts with rounded corners, with cylindrical fixation hole, form RNMG |
| DIN 4988 SNMA | Indexable hardmetal inserts with rounded corners, with cylindrical fixation hole, form SNMA |
| DIN 4988 SNMG | Indexable hardmetal inserts with rounded corners, with cylindrical fixation hole, form SNMG |
| DIN 4988 SNMM | Indexable hardmetal inserts with rounded corners, with cylindrical fixation hole, form SNMM |
| DIN 4988 TNMA | Indexable hardmetal inserts with rounded corners, with cylindrical fixation hole, form TNMA |
| DIN 4988 TNMG | Indexable hardmetal inserts with rounded corners, with cylindrical fixation hole, form TNMG |
| DIN 4988 TNMM | Indexable hardmetal inserts with rounded corners, with cylindrical fixation hole, form TNMM |
| DIN 6590 SECN | Indexable hardmetal (carbide) inserts with wiper edges, without fixation hole, form SECN |
| DIN 6590 SNAN ENN | Indexable hardmetal (carbide) inserts with wiper edges, without fixation hole, form SNAN ENN |
| DIN 6590 SNAN ANN | Indexable hardmetal (carbide) inserts with wiper edges, without fixation hole, form SNAN ANN |
| DIN 6590 SNCN ENN | Indexable hardmetal (carbide) inserts with wiper edges, without fixation hole, form SNCN ENN |
| DIN 6590 SNCN ANN | Indexable hardmetal (carbide) inserts with wiper edges, without fixation hole, form SNCN ANN |
| DIN 6590 SNKN ENN | Indexable hardmetal (carbide) inserts with wiper edges, without fixation hole, form SNKN ENN |
| DIN 6590 SNKN ANN | Indexable hardmetal (carbide) inserts with wiper edges, without fixation hole, form SNKN ANN |
| DIN 6590 SPAN | Indexable hardmetal (carbide) inserts with wiper edges, without fixation hole, form SPAN |
| DIN 6590 SPCN | Indexable hardmetal (carbide) inserts with wiper edges, without fixation hole, form SPCN |
| DIN 6590 SPKN | Indexable hardmetal (carbide) inserts with wiper edges, without fixation hole, form SPKN |
| DIN 6590 TECN | Indexable hardmetal (carbide) inserts with wiper edges, without fixation hole, form TECN |
| DIN 6590 TPAN PP | Indexable hardmetal (carbide) inserts with wiper edges, without fixation hole, form TPAN PP |
| DIN 6590 TPAN PD | Indexable hardmetal (carbide) inserts with wiper edges, without fixation hole, form TPAN PD |
| DIN 6590 TPCN PP | Indexable hardmetal (carbide) inserts with wiper edges, without fixation hole, form TPCN PP |
| DIN 6590 TPCN PD | Indexable hardmetal (carbide) inserts with wiper edges, without fixation hole, form TPCN PD |
| DIN 6590 TPKN | Indexable hardmetal (carbide) inserts with wiper edges, without fixation hole, form TPKN |
| DIN 771 A | High speed steel tips for turning and planing tools, form A |
| DIN 771 B | High speed steel tips for turning and planing tools, form B |
| DIN 771 C | High speed steel tips for turning and planing tools, form C |
| DIN 771 D | High speed steel tips for turning and planing tools, form D |
| DIN 8083 | Carbide tipped circular saw blades for wood |
| DIN 8809 | Circular tool steel saw blades for woodworking |
| DIN 1837 | Metall slitting saws, fine pitch |
| DIN 1838 | Metall slitting saws, coarse pitch |
| DIN 8576 | Segment saw blades for cold circular saws |
| DIN 6438 | Tinners snips |
| DIN 6438 L | Tinners snips, form L curved (hole cutter) |
| DIN 900 A | Tommy bars for socket wrenches, form A |
| DIN 133 | Slugging wrenches, open end |
| DIN 1810 A | Hook wrenches, form A |
| DIN 1810 B | Hook wrenches, form B |
| DIN 3110 | Engineers wrenches, double head, open end, with unequal jaw widths |
| DIN 3112 | Tee handled socket wrenches, single end |
| DIN 3113 A | Combination wrenches with equal openings, form A |
| DIN 3113 B | Combination wrenches with equal openings, form B |
| DIN 3114 | Single-head engineers jaw wrenches |
| DIN 3116 A | Pin-type face wrenches, form A |
| DIN 3116 B | Pin-type face wrenches, form B |
| DIN 3116 C | Pin-type face wrenches, form C |
| DIN 3116 D | Pin-type face wrenches, form D |
| DIN 3117 A | Adjustable wrenches, open end, form A |
| DIN 3117 B | Adjustable wrenches, open end, form B |
| DIN 3118 | Double-end flat flare nut wrenches with unequel openings |
| DIN 3122 A | Drivingparts for hand operated square drive socket wrenches, form A |
| DIN 3122 B | Drivingparts for hand operated square drive socket wrenches, form B |
| DIN 3122 C | Drivingparts for hand operated square drive socket wrenches, form C |
| DIN 3122 CV | Drivingparts for hand operated square drive socket wrenches, form CV |
| DIN 3122 D | Drivingparts for hand operated square drive socket wrenches, form D |
| DIN 3122 E | Drivingparts for hand operated square drive socket wrenches, form E |
| DIN 3122 F | Drivingparts for hand operated square drive socket wrenches, form F |
| DIN 3122 G | Drivingparts for hand operated square drive socket wrenches, form G |
| DIN 3123 A | Attachments for hand operated square drive socket wrenches, form A |
| DIN 3123 B | Attachments for hand operated square drive socket wrenches, form B |
| DIN 3123 D | Attachments for hand operated square drive socket wrenches, form D |
| DIN 3123 C | Attachments for hand operated square drive socket wrenches, form C |
| DIN 3124 | Hand-operated socket wrenches, square drive for hexagon screw |
| DIN 3129 | Power square drive socket wrenches, rings |
| DIN 3129 | Power square drive socket wrenches, connection pins |
| DIN 3129 | Power square drive socket wrenches |
| DIN 317 | Drill drifts for taper shanks with drift tang |
| DIN 6368 | Spanners for shell end mill arbors |
| DIN 6434 | Rivet set |
| DIN 659 | Tee handled socket wrenches, tubular single end |
| DIN 6911 | Hexagon socket screw keys with pilot |
| DIN 7417 | Square socket keys |
| DIN 7422 | Bits with square drive for hexagon socket screws, hand operated |
| DIN 7444 | Slugging wrenches |
| DIN 806 | Centering points with full point and metric cone |
| DIN 806 E | Centering points with full point and carbide insert, morse cone |
| DIN 806 H | Centering points with flattened point and morse cone |
| DIN 806 HE | Centering points with flattened point and carbide insert, morse cone |
| DIN 807 | Lathe centres 60° with nut |
| DIN 838 | Box wrenches, double head, deep offset, with unequel openings |
| DIN 894 | Single-head engineers jaw wrenches |
| DIN 895 | Engineers wrenches, double head, open end, with unequal jaw widths |
| DIN 896 A | Tee handled socket wrenches, double end, form A |
| DIN 896 B | Tee handled socket wrenches, double end, form B |
| DIN 900 C | Tommy bars for socket wrenches, form C |
| DIN 904 | Tee wrenches, socket single square |
| DIN 334 A | Countersinks 60°, form A |
| DIN 334 B | Countersinks 60°, form B |
| DIN 334 C | Countersinks 60°, form C |
| DIN 334 D | Countersinks 60°, form D |
| DIN 335 A | Countersinks 90°, form A |
| DIN 335 B | Countersinks 90°, form B |
| DIN 335 C | Countersinks 90°, form C |
| DIN 335 D | Countersinks 90°, form D |
| DIN 347 A | Countersinks 120°, form A with cylindrical |
| DIN 347 B | Countersinks 120°, form B with a conic shaft |
| DIN 1866 | Countersinks 90 °, with parallel shank solid pilot |
| DIN 1867 | Countersinks 90°,with Morse taper shank and detachable pilot |
| DIN 373 | Counterbores with parallel shank and solid pilot |
| DIN 375 | Counterbores with Morse taper shank and detacable pilot |
| DIN 1862 | Counterbores for jig boring machines |
| DIN 1863 | Countersinks 60°, form B |
| DIN 6366-1 | Clutch drive rings for shell mill arbors |
| DIN 2079 A | Drive keys, form A |
| DIN 2079 B | Drive keys, form B |
| DIN 6355 | Milling machine arbors with steep taper |
| DIN 2082-1 | Nuts for milling machine arbors |
| DIN 2084-1 C | Specing collars for milling machine arbors, form C |
| DIN 2085 | Sets of spacer collars for milling machine arbors with 7/24 taper |
| DIN 1868 | Detachable pilots for counterbores and countersinks |
| DIN 2082-2 W | Nuts for hob arbors |
| DIN 2083-1 | Bearing collars for milling machine arbors for cutters with axial keyway |
| DIN 2083-2 A | Bearing sleeves for hob arbors; parallel type, form A |
| DIN 2083-2 B | Bearing sleeves for hob arbors; parallel type, form B |
| DIN 2084-1 A | Specing collars for milling machine arbors, form A |
| DIN 2084-1 B | Specing collars for milling machine arbors, form B |
| DIN 2084-2 D | Spacer collars for hob arbors, form D |
| DIN 2084-3 E | Spacer collars for hob arbors, form E |
| DIN 2086-2 A | Hob arbors with morse taper or metric taper shank for hobs with longitudinal keyway |
| DIN 2086-3 B | Hob arbors with morse taper or metric taper shank for hobs with clutch drive |
| DIN 2187 | Extension sockets for tools with Morse taper shanks |
| DIN 377 | Extansions for tools with square |
| DIN 523 | Lathe mandrels |
| DIN 6341-1 K | Draw-in collets, form K short collets |
| DIN 6341-1 | Tapered sleeves for collets |
| DIN 6341-1 L | Draw-in collets, form L long collets |
| DIN 6343 | Collets - dead length type |
| DIN 6344 A | Feed fingers, form A for internal feed |
| DIN 6344 B | Feed fingers, form B for external feed |
| DIN 6354 A | Milling machine arbors with step taper, form A |
| DIN 6354 B | Milling machine arbors with step taper, form B |
| DIN 6356 | Centering arbors for milling cutters |
| DIN 6357 | Holding arbors for milling eutters |
| DIN 6359 | Reduction sleeves wit 7/24 taper for parallel shanks with driving surface |
| DIN 6360 | Milling machine arbors with steep taper for shell end mills with longitudinal driving slot |
| DIN 6361 | Milling machine arbors with steep taper for shell end mills with clutch drive |
| DIN 6363 | Reduction sleeves for tools with 7:24 taper shanks |
| DIN 6364 | Reduction sleeves with external 7/24 taper for morse taper shank with tightening thread |
| DIN 6366-2 W | Clutch drive rings for shell hob arbors, form W |
| DIN 6374 | Grinding machine mandrels |
| DIN 6385 A | Short boring bars with taper 7/24, form A for radial tool holder |
| DIN 6385 B | Short boring bars with taper 7/24, form B for oblique tool holder |
| DIN 6385 C | Short boring bars with taper 7/24, form C for radial and oblique tool holder |
| DIN 6499 A | Collets with 8° setting angle for tool shanks, form A |
| DIN 6499 B | Collets with 8° setting angle for tool shanks, form B |
| DIN 6499 C | Collet holders |
| DIN 6499 D | Nuts |
| DIN 69880-1 | Tool holders with parallel shank |
| DIN 69880-3 B1 | Tool holders with parallel shank - Part 3: Type B with square cross seat, form B1 right, short |
| DIN 69880-3 B2 | Tool holders with parallel shank - Part 3: Type B with square cross seat, form B2 left, short |
| DIN 69880-3 B3 | Tool holders with parallel shank - Part 3: Type B with square cross seat, form B3 overhead, right, short |
| DIN 69880-3 B4 | Tool holders with parallel shank - Part 3: Type B with square cross seat, form B3 overhead, left, short |
| DIN 69880-3 B5 | Tool holders with parallel shank - Part 3: Type B with square cross seat, form B5 right, long |
| DIN 69880-3 B6 | Tool holders with parallel shank - Part 3: Type B with square cross seat, form B6 left, long |
| DIN 69880-3 B7 | Tool holders with parallel shank - Part 3: Type B with square cross seat, form B7 overhead, right, long |
| DIN 69880-3 B8 | Tool holders with parallel shank - Part 3: Type B with square cross seat, form B6 overhead, left, long |
| DIN 69880-6 E1 | Tool holders with parallel shank: Type E with cylindrical seat, form E1 for drilling tools with internal coolant feed |
| DIN 69880-6 E2 | Tool holders with parallel shank: Type E with cylindrical seat, form E2 for turning tools with cylindrical |
| DIN 6321 A | Location pins, form A |
| DIN 6321 B | Location pins cylindric, form B |
| DIN 6321 C | Location pins flattened, form C |
| DIN 5519 A | Bordering strips, form A |
| DIN 5519 B | Bordering strips, form B |
| DIN 5519 C | Bordering strips, form C |
| DIN 5519 D | Bordering strips, form D |
| DIN 5519 E | Bordering strips, form E |
| DIN 5519 F1 | Bordering strips, form F1 |
| DIN 5519 F2 | Bordering strips, form F2 |
| DIN 65187 A | Inserts for composite materials, form A |
| DIN 65187 B | Inserts for composite materials, form B |
| DIN 65188 | Inserts for composite materials |
| DIN 65191 | Inserts for composit materials |
| DIN 65306 A | Inserts for composite materials, form A |
| DIN 65306 B | Inserts for composite materials, form B |
| DIN 65307 | Inserts for composite materials |
| DIN 65433 A | Sleeves, wall thickness 0.25 mm, for fasteners with reduced countersunk head, form A |
| DIN 65433 B | Sleeves, wall thickness 0.25 mm, for fasteners with reduced countersunk head, form B |
| DIN 65434 A | Sleeves, form A |
| DIN 65434 B | Sleeves, form B |
| DIN 65550 | Flanged collars |
| DIN 6320 | Feet with threaded shank |
| DIN 71752 G | Fork heads, form G |
| DIN 71802 A | Hinged joints with threaded pin and hexagonal nut without spanner flat, form A |
| DIN 71802 AS | Hinged joints with threaded pin and hexagonal nut and locking clip without spanner flat, form AS |
| DIN 71802 B | Hinged joints with rivet shank, form B |
| DIN 71802 BS | Hinged joints with rivet shank and locking clip, form BS |
| DIN 71802 C | Hinged joints with threaded pin and hexagonal nut with spanner flat, form C |
| DIN 71802 CS | Hinged joints with threaded pin and hexagonal nut and locking clip with spanner flat, form CS |
| DIN 71803 A | Ball studs, form A |
| DIN 71803 B | Ball studs, form B |
| DIN 71803 C | Ball studs, form C |
| DIN 71805 A | Ball cups, form A |
| DIN 71805 B | Ball cups, form B |
| DIN 71805 S | Circlips, form S |
| DIN 8140-1 A | Wire thread inserts for ISO metric screw threads, form A |
| DIN 8140-1 B | Wire thread inserts for ISO metric screw threads, form B |
| DIN 20038 | Coupling nozzles |
| DIN 20039 A | Hose clips, form A |
| DIN 20039 B | Hose clamps, form B |
| DIN 20066 D | Hose fittings, form D |
| DIN 20066 E | Hose fittings, form E |
| DIN 20066 N | Hose fittings, form N |
| DIN 20066 N45 | Hose fittings, form N45 |
| DIN 20066 N90 | Hose fittings, form N90 |
| DIN 20066 P | Hose fittings, form P |
| DIN 20066 P45 | Hose fittings, form P45 |
| DIN 20066 P90 | Hose fittings, form P90 |
| DIN 20066 R | Hose fittings, form R |
| DIN 20066 R45 | Hose fittings, form R45 |
| DIN 20066 R90 | Hose fittings, form R90 |
| DIN 20066 S | Hose fittings, form S |
| DIN 20066 S45 | Hose fittings, form S45 |
| DIN 20066 S90 | Hose fittings, form S90 |
| DIN 20066 | Hose assemblies |
| DIN 20078-12 | Hose fittings 4-bolt split flange type, form S |
| DIN 8535 | Threaded nozzles |
| DIN 8541-3 | Hoses |
| DIN 15413 A | Hook nuts for cranes, form A |
| DIN 15413 B | Hook nuts for cranes, form B |
| DIN 15413 C | Hook nuts for cranes, form C |
| DIN 15401-1 RF | Shank hooks, form RF |
| DIN 15401-1 RFN | Shank hooks, form RFN |
| DIN 15401-1 RSN | Shank hooks, form RSN |
| DIN 15401-2 | Shank hook |
| DIN 15401-2 GF | Shank hooks with a point, form GF |
| DIN 15401-2 GFN | Shank hooks with a point, form GFN |
| DIN 15401-2 GS | Shank hooks with a point, form GS |
| DIN 15401-2 GSN | Shank hooks with a point, form GSN |
| DIN 15402-1 RF | Ramshorn shank hooks, form RF |
| DIN 15402-1 RFN | Ramshorn shank hooks, form RFN |
| DIN 15402-1 RS | Ramshorn shank hooks, form RS |
| DIN 15402-1 RSN | Ramshorn shank hooks, form RSN |
| DIN 15402-2 | Ramshorn shank hook |
| DIN 15402-2 GF | Ramshorn shank hooks, form GF |
| DIN 15402-2 GFN | Ramshorn shank hooks, form GFN |
| DIN 15402-2 GS | Ramshorn shank hooks, form GS |
| DIN 15402-2 GSN | Ramshorn shank hooks, form GSN |
| DIN 5287 A | Simplex hook (spring hooks made of one piece), form A |
| DIN 5287 B | Simplex hooks (spring hooks made of one piece), form B |
| DIN 5290-1 A | Snap hook from light metal with setting nut, form A |
| DIN 5290-2 F | Light metal snap hook without setting nut, form F |
| DIN 5297-1 A | Spring snap with fixed square eye, form A |
| DIN 5297-1 B | Spring snaps with fixed square eye, form B |
| DIN 5299 A | Snap hooks half-round wire, round wire and forged, form A |
| DIN 5299 B | Snap hooks half-round wire, round wire and forged, form B |
| DIN 5299 C | Snap hooks half-round wire, round wire and forged, form C |
| DIN 5299 D | Snap hooks half-round wire, round wire and forged, form D |
| DIN 5299 E | Snap hooks half-round wire, round wire and forged, form E |
| DIN 5545 1 | Swing-links, pos. No. 1 |
| DIN 5545 10 | Spring bolts, pos. No. 10 |
| DIN 5545 11 | Spring bolts, pos. No. 11 |
| DIN 5545 12 | Spring bolts, pos. No. 12 |
| DIN 5545 13 | Spring bolts, pos. No. 13 |
| DIN 5545 14 | Sealing pieces, pos. No. 14 |
| DIN 5545 15 | Sealing pieces, pos. No. 15 |
| DIN 5545 18 | Swing-links, pos. No. 18 |
| DIN 5545 19 | Swing-links, pos. No. 19 |
| DIN 5545 2 | Swing-links, pos. No. 2 |
| DIN 5545 20 | Spring bolts, pos. No. 20 |
| DIN 5545 3 | Swing-links, pos. No. 3 |
| DIN 5545 4 | Swing-links, pos. No. 4 |
| DIN 5545 5 | Swing-links, pos. No. 5 |
| DIN 5545 6 | Swing-link stones, pos. No. 6 |
| DIN 5545 7 | Swing-link stones, pos. No. 7 |
| DIN 5545 8 | Swing-link stones, pos. No. 8 |
| DIN 5545 9 | Adapters, pos. No. 9 |
| DIN 7540 | Eye hooks, grade 5 |
| DIN 7541 | Large-eye hooks; grade 5 |
| DIN 81408 A | Screwing-hooks, form A |
| DIN 81408 B | Screwing-hooks, form B |
| DIN 81408 C | Screwing-hooks, form C |
| DIN 81408 D | Screwing-hooks, form D |
| DIN 82016 1 | Brackets, ser. no. 1 |
| DIN 82016 3 | Brackets, ser. no. 3 |
| DIN 82016 A | Cargo shackles, form A |
| DIN 82016 B | Cargo shackles, form B |
| DIN 82101 A | Shackles, form A |
| DIN 82101 B | Shackles, form B |
| DIN 82101 C | Shackles, form C |
| DIN 82101 F1 | Brackets, form F1 |
| DIN 82101 F2 | Brackets, form F2 |
| DIN 82101 F3 | Brackets, form F3 |
| DIN 82101 G4 | Bolts, form G4 |
| DIN 82101 G5 | Bolts, form G5 |
| DIN 82101 G6 | Bolts, form G6 |
| DIN 82101 G7 | Bolts, form G7 |
| DIN 82102 | Components for lifting, towing, lashing - Shackle dee - Stainless steels |
| DIN 1052 | Dowels |
| DIN 68705-2 | Plywood |
| DIN 68705-3 | Plywoods; building-veneer plywoods |
| DIN 68705-4 | Plywoods; core-plywoods for buildings purposes |
| DIN 68705-5 | Plywoods, veneer plywoods made of beech for building purposes |
| DIN 268 | Tangential keys and tangential keyways for alternating shock loads |
| DIN 271 | Tangential keys for constant loads |
| DIN 5688-1 A | Chain slings with hooks or end links, grade 5, form A |
| DIN 5688-1 B | Chain slings with hooks or end links, grade 5, form B |
| DIN 5688-1 H1 | Chain slings with hooks or end links, grade 5, form H1 |
| DIN 5688-1 H2 | Chain slings with hooks or end links, grade 5, form H2 |
| DIN 5688-1 H3 | Chain slings with hooks or end links, grade 5, form H3 |
| DIN 5688-1 H4 | Chain slings with hooks or end links, grade 5, form H4 |
| DIN 5688-1 R1 | Chain slings with hooks or end links, grade 5, form R1 |
| DIN 5688-1 R2 | Chain slings with hooks or end links, grade 5, form R2 |
| DIN 5688-1 R3 | Chain slings with hooks or end links, grade 5, form R3 |
| DIN 5688-1 R4 | Chain slings with hooks or end links, grade 5, form R4 |
| DIN 695 A | Chain slings with hooks or end links, grade 2, form A |
| DIN 695 B | Chain slings with hooks or end links, grade 2, form B |
| DIN 695 H1 | Chain slings with hooks or end links, grade 2, form H1 |
| DIN 695 R1 | Chain slings with hooks or end links, grade 2, form R1 |
| DIN 695 H2 | Chain slings with hooks or end links, grade 2, form H2 |
| DIN 695 R2 | Chain slings with hooks or end links, grade 2, form R2 |
| DIN 695 H3 | Chain slings with hooks or end links, grade 2, form H3 |
| DIN 695 R3 | Chain slings with hooks or end links, grade 2, form R3 |
| DIN 695 H4 | Chain slings with hooks or end links, grade 2, form H4 |
| DIN 695 R4 | Chain slings with hooks or end links, grade 2, form R4 |
| DIN 80402-1 A | Locking chains - Assembly, component parts, form A |
| DIN 80402-1 B | Locking chains - Assembly, component parts, form B |
| DIN 80402-1 C | Locking chains - Assembly, component parts, form C |
| DIN 80402-1 D | Locking chains - Assembly, component parts, form D |
| DIN 80402-1 E | Locking chains - Assembly, component parts, form E |
| DIN 80402-1 5 | Safety chains - Part 1: Chains for small part security - Eyes |
| DIN 80402-1 6 | Safety chains - Part 1: Chains for small part security - S-hooks |
| DIN 80402-1 7 | Safety chains - Part 1: Chains for small part security - S-hooks |
| DIN 8150 A | End clips, form A |
| DIN 8150 | Gall's chains |
| DIN 8150 B | End bolts, form B |
| DIN 8150 C | End bolts, form C |
| DIN 8150 D | Catch bolts, form D |
| DIN 8150 E | Connector bolts, form E |
| DIN 8187-3 E2 | Roller chains - European type - Part 3: Simple roller chains with extended pins; connecting dimensions, type E2 |
| DIN 8187-3 E3 | Roller chains - European type - Part 3: Simple roller chains with extended pins; connecting dimensions, type E3 |
| DIN 8187-3 Z2 | Roller chains - European type - Part 3: Simple roller chains with extended pins; connecting dimensions, type Z2 |
| DIN 8187-3 Z3 | Roller chains - European type - Part 3: Simple roller chains with extended pins; connecting dimensions, type Z3 |
| DIN 8187-1 | Roller chains - European type - Part 1 |
| DIN 8187-1 A | Liaisons |
| DIN 8187-1 B | Liaisons |
| DIN 8187-1 C | Liaisons |
| DIN 8187-1 E | Liaisons |
| DIN 8187-1 L | Liaisons |
| DIN 8187-1 S | Liaisons |
| DIN 8187-2 K1 | Roller chains - European type - Part 2: Simple roller chains with attachments, type K1 |
| DIN 8187-2 K2 | Roller chains - European type - Part 2: Simple roller chains with attachments, type K2 |
| DIN 8187-2 M1 | Roller chains - European type - Part 2: Simple roller chains with attachments, type M1 |
| DIN 8187-2 M2 | Roller chains - European type - Part 2: Simple roller chains with attachments, type M2 |
| DIN 5685-1 G | Round steel chains without pressure testing, long limbs, form G |
| DIN 5686 | Double chains |
| DIN 24534 3 | Chain locks, chain hooks |
| DIN 32891 | Round steel link chains - Grade 2, non-calibrated, tested |
| DIN 5279 A | Chandelier chains, chain elements of sheet metal, form A |
| DIN 5279 B | Chandelier chains, chain elements of sheet metal, form B |
| DIN 5684-1 | Round steel link chains for lifting purposes, grade 5 |
| DIN 5684-2 | Round steel link chains for lifting purposes, grade 6 |
| DIN 5684-3 | Short link chain for lifting purposes – Safety – Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT) |
| DIN 5685-2 G | Round steel link chains non proof loaded - Part 2: Semi long link, form G |
| DIN 5685-3 | Round steel link chains non proof loaded - Part 3: Short link |
| DIN 5687-1 | Round steel link chains - Part 1: Grade 5, medium tolerance, tested |
| DIN 5688-3 G | Chain slings - Part 3: Master link assemblies, grade 8, form G |
| DIN 5688-3 A | Chain slings - Part 3: Links, grade 8, form A |
| DIN 5688-3 B | Chain slings - Part 3: Links, grade 8, form B |
| DIN 762-1 | Round steel link chains - Chain strands from round steel link chains, nominal pitch: 5xd, for the operation in bucket elevators - part 1: Made from case hardened quality steel, Grade 2 |
| DIN 763 | Round steel link chains, tested. non calibrated, long link |
| DIN 766 | Round steel link chains, grade 3, calibrated, tested |
| DIN 8192 A | Chain wheels for roller chains as specified in DIN ISO 606, form A |
| DIN 8192 B | Chain wheels for roller chains as specified in DIN ISO 606, form B |
| DIN 32676 | Clamp connections for stainless steel tubes - Weld-on type |
| DIN 32676 B | Blind clamping clips, form B |
| DIN 32676 D | Seals, form D |
| DIN 32676 GK | Clamp joints, form GK |
| DIN 32676 KK | Clamping unions, form KK |
| DIN 32676 KL | Clamping unions, form KL |
| DIN 5291 | Roll buckles |
| DIN 5292 | Strap buckles |
| DIN 15078 B | Cranes; flanged crane rail wheels; with roller bearings without gear wheel, form B wide wheel |
| DIN 15078 S | Cranes; flanged crane rail wheels; with roller bearings without gear wheel, form S narrow wheel |
| DIN 15084 A | Cranes, crane rail wheels with roller bearing covers, form A with grooved gasket |
| DIN 15084 B | Cranes, crane rail wheels with roller bearing covers, form B for radial shaft seals |
| DIN 31216-2 1 | Sash fasteners, double sided, ser. no. 1 |
| DIN 31216-2 2 | Sash fasteners, single sided, ser. no. 2 |
| DIN 31216-2 3 | Springs, ser. no. 3 |
| DIN 31216-2 4 | Bolts, ser. no. 4 |
| DIN 31216-2 5 | Base plates for outside surfaces, ser. no. 5 |
| DIN 31216-2 E | Rubbing plates, form E |
| DIN 31216-2 F | Rubbing plates, form F |
| DIN 81415 A | Turnbuckles for furniture and fitments for furniture and fitments, form A |
| DIN 81415 B | Turnbuckles for furniture and fitments for furniture and fitments, form B |
| DIN 81415 C | Turnbuckles for furniture and fitments for furniture and fitments, form C |
| DIN 81415 D | Turnbuckles for furniture and fitments for furniture and fitments, form D |
| DIN 81416 A | Entering catches, light type, for furniture and fitments, form A |
| DIN 81416 B | Entering catches, light type, for furniture and fitments, form B |
| DIN 81416 C | Entering catches, light type, for furniture and fitments, form C |
| DIN 81416 D | Entering catches, light type, for furniture and fitments, form D |
| DIN 81416 E | Entering catches, light type, for furniture and fitments, form E |
| DIN 128 A | Curved spring lock washers |
| DIN 93 | Washers with tap |
| DIN 5296 B | Rings, form B, not welded |
| DIN 115 | Insertion rings |
| DIN 127 A | Spring lock washers, form A |
| DIN 127 B | Spring lock washers, form B |
| DIN 137 B | Wave spring washers |
| DIN 137 A | Curved spring washers |
| DIN 322 G | Loose lubrication rings for general purposes |
| DIN 322 U | Loose lubrication rings for general purposes |
| DIN 432 | Washers with external tap |
| DIN 463 | Washers with 2 taps |
| DIN 5296 A | Rings, form A, welded |
| DIN 5296 C | Rings, form C, welded (half round) |
| DIN 65202 | Aerospace series - Elastomeric O-rings |
| DIN 6905 | Spring washers for screw and washer assemblies |
| DIN 70951 | Snap rings for slotted nuts to DIN 70851 |
| DIN 70952 A | Locking plates for groove nuts according to DIN 70852, form A |
| DIN 70952 B | Locking plates for groove nuts according to DIN 70852, form B |
| DIN 73123 A | Snap rings for piston pins, form A |
| DIN 73123 B | Snap rings for piston pins, form B |
| DIN 73123 C | Snap rings for piston pins, form C |
| DIN 73130 A | Round wire snap rings for piston pins, form A |
| DIN 73130 C | Round wire snap rings for piston pins, form C |
| DIN 74361-2 C | Disc wheels for motor vehicles and trailers, form C |
| DIN 7980 | Spring lock washers for screws with cylindrical heads (Attention: recalled without substitution) |
| DIN 18264 | Spring hinges for doors, single action |
| DIN 31211 B | Hinges, Form B |
| DIN 31211 N | Hinges, form N |
| DIN 31212 A | Hinges, outer half, form A |
| DIN 31212 J | Hinges, outer half, form J |
| DIN 3133 D | Toggle-type fasteners, sailent, with elongated base plate, form D |
| DIN 3133 G | Toggle-type fasteners, sailent, with elongated base plate, form G |
| DIN 3133 K | Toggle-type fasteners, sailent, with elongated base plate, form K |
| DIN 3134 D | Toggle-type fasteners with and without locking eye, form D |
| DIN 3134 E | Toggle-type fasteners with and without locking eye, form E |
| DIN 7954 A | Hinges rolled, form A |
| DIN 7954 B | Hinges rolled, form B |
| DIN 7954 C | Hinges rolled, form C |
| DIN 7954 D | Hinges rolled, form D |
| DIN 7955 A | Hinges forged, form A |
| DIN 7955 B | Hinges forged, form B |
| DIN 7955 C | Hinges forged, form C |
| DIN 7955 D | Hinges forged, form D |
| DIN 7956 | Continuous hinges, rolled |
| DIN 7957 | Flap hinges, rolled |
| DIN 81402 A | Hinges for ship's cabinet doors, for screwing on, form A |
| DIN 81402 B | Hinges for ship's cabinet doors, for screwing on, form B |
| DIN 81402 C | Hinges for ship's cabinet doors, for screwing on, form C |
| DIN 81402 D | Hinges for ship's cabinet doors, for screwing on, form D |
| DIN 81402 E | Hinges for ship's cabinet doors, for screwing on, form E |
| DIN 81402 F | Hinges for ship's cabinet doors, for screwing on, form F |
| DIN 81402 G | Hinges for ship's cabinet doors, for screwing on, form G |
| DIN 1440 | Washers for clevis pins, medium finish |
| DIN 433-1 | Washers, product grade A, up to hardness 250 HV, preferably for chesse head screws |
| DIN 433-2 | Washers, product grade A, from hardness 300 HV, preferably for chesse head screws |
| DIN 125-1 B | Washers, product grade A, up to hardness 250 HV, primarily for hexagon bolts and nuts, form B |
| DIN 126 | Washers, product grade C, primarily for hexagon bolts and nuts |
| DIN 125-1 A | Washers, product grade A, up to hardness 250 HV, primarily for hexagon bolts and nuts, form A |
| DIN 125-2 A | Washers, product grade A, from hardness 300 HV, primarily for hexagon bolts and nuts, form A |
| DIN 125-2 B | Washers, product grade A, from hardness 300 HV, primarily for hexagon bolts and nuts, form B |
| DIN 1441 | Washers for clevis pins, finish coarse |
| DIN 15237 TS | Cupped washers |
| DIN 1573 A | Plates with groove, form A |
| DIN 1573 B | Plates with wart, form B |
| DIN 1573 C | Plates with nose, form C |
| DIN 1573 D | Keys, form D |
| DIN 34815 | Plastic plain washers - Normal series |
| DIN 34816 | Plastic plain washers - Large series |
| DIN 3568 | Clamping plates for the suspension of pipes on I and IP beams |
| DIN 434 | Square taper washers for U-sections |
| DIN 435 | Square taper washers for I-sections |
| DIN 436 | Square washers, especially for wood constructions |
| DIN 440 V | Washers with square hole, especially for wood constructions, form V |
| DIN 440 R | Washers with round hole, especially for wood constructions, form R |
| DIN 470 | Sealing washers |
| DIN 522 A | Washers of metallic material, class A |
| DIN 522 C | Washers of metallic material, class C |
| DIN 522 F | Washers of metallic material, class F |
| DIN 6340 | Washers for clamping devices |
| DIN 6796 | Conical spring washers for bolted connections |
| DIN 6797 A | Tooth lock washers, form A |
| DIN 6797 J | Tooth lock washers, form J |
| DIN 6797 V | Tooth lock washers, form V |
| DIN 6798 A | Serrated lock washers, form A |
| DIN 6798 J | Serrated lock washers, form J |
| DIN 6798 V | Serrated lock washers, form V |
| DIN 6902 A | Washers for screws and washers assemblies, form A |
| DIN 6902 B | Washers for screws and washers assemblies, form B |
| DIN 6902 C | Washers for screws and washers assemblies, form C |
| DIN 6903 A | Washers for tapping screw and washer assemblies, form A |
| DIN 6903 B | Washers for tapping screw and washer assemblies, form B |
| DIN 6904 | Curved spring washers for screw and washer assemblies |
| DIN 6907 | Serrated lock washers external teeth for screw and washer assemblies |
| DIN 6908 | Conical spring washers for screws and washers assemblies |
| DIN 6916 | Round washers for high-tensile structural bolting |
| DIN 6917 | Square taper washers for I-sections for high-tensile structural bolting |
| DIN 6918 | Square taper washers for U-sections for high-tensile structural bolting |
| DIN 7349 | Washers for bolts with heavy type spring pins |
| DIN 7989-1 | Washers for steel structures - Part 1: Product grade C |
| DIN 7989-2 | Washers for steel structures - Part 2: Product grade A |
| DIN 9021 | Washers with outside diameter ca. 3 x nominal thread diameter |
| DIN 988 | Shim rings |
| DIN 988 S | Supporting washers |
| DIN 3015-1 LTM | Mounting rail nuts |
| DIN 3015-1 LVS | Locking pistons |
| DIN 3015-1 LTS | Bearing rail |
| DIN 3015-1 LAP | Temporary welding plates |
| DIN 3015-1 LAS | Annex screws |
| DIN 3015-1 LDP | Cover plates |
| DIN 3015-1 LEL | Elastomer inserts |
| DIN 3015-1 LKP | Clamp half pairs |
| DIN 3015-1 A | Fastening clamps, Block clamps - Part 1: Light duty (L), form A |
| DIN 3015-1 B | Fastening clamps, Block clamps - Part 1: Light duty (L), form B |
| DIN 3015-1 C | Fastening clamps, Block clamps - Part 1: Light duty (L), form C |
| DIN 3015-1 D | Fastening clamps, Block clamps - Part 1: Light duty (L), form D |
| DIN 3015-1 E | Fastening clamps, Block clamps - Part 1: Light duty (L), form E |
| DIN 3015-1 F | Fastening clamps, Block clamps - Part 1: Light duty (L), form F |
| DIN 3015-1 G | Fastening clamps, Block clamps - Part 1: Light duty (L), form G |
| DIN 3015-1 H | Fastening clamps, Block clamps - Part 1: Light duty (L), form H |
| DIN 3015-2 1 | Clamp halfs |
| DIN 3015-2 SKP | Clamp half pairs |
| DIN 3015-2 SAP | Temporary welding plates |
| DIN 3015-2 SDP | Cover plates |
| DIN 3015-2 STM | Mounting rail nuts |
| DIN 3015-2 SVS | Locking pistons |
| DIN 3015-2 SAS | Annex screws |
| DIN 3015-2 SEL | Elastomer inserts |
| DIN 3015-2 STS | Bearing rail |
| DIN 3015-2 A | Fastening clamps, Block clamps - Part 2: Heavy duty (S), form A |
| DIN 3015-2 B | Fastening clamps, Block clamps - Part 2: Heavy duty (S), form B |
| DIN 3015-2 D | Fastening clamps, Block clamps - Part 2: Heavy duty (S), form D |
| DIN 3015-2 E | Fastening clamps, Block clamps - Part 2: Heavy duty (S), form E |
| DIN 3015-2 G | Fastening clamps, Block clamps - Part 2: Heavy duty (S), form G |
| DIN 3015-2 H | Fastening clamps, Block clamps - Part 2: Heavy duty (S), form H |
| DIN 3015-2 S | Fastening clamps, Block clamps - Part 2: Heavy duty (S), form S |
| DIN 3015-3 1 | Clamp halfs |
| DIN 3015-3 KP | Clamp half pairs |
| DIN 3015-3 AP | Temporary welding plates |
| DIN 3015-3 DP | Cover plates |
| DIN 3015-3 TM | Mounting rail nuts |
| DIN 3015-3 VS | Locking pistons |
| DIN 3015-3 AS | Annex screws |
| DIN 3015-3 A | Fastening clamps, Block clamps - Part 3: Double clamps (Z), form A |
| DIN 3015-3 D | Fastening clamps, Block clamps - Part 3: Double clamps (Z), form D |
| DIN 3015-3 G | Fastening clamps, Block clamps - Part 3: Double clamps (Z), form G |
| DIN 3015-3 H | Fastening clamps, Block clamps - Part 3: Double clamps (Z), form H |
| DIN 3016-1 A1 | Fastening clamps - Part 1: With tongue, form A1 |
| DIN 3016-1 A2 | Fastening clamps - Part 1: With tongue, form A2 |
| DIN 3016-1 B1 | Fastening clamps - Part 1: With tongue, form B1 |
| DIN 3016-1 B2 | Fastening clamps - Part 1: With tongue, form B2 |
| DIN 3016-1 C1 | Fastening clamps - Part 1: With tongue, form C1 |
| DIN 3016-1 C2 | Fastening clamps - Part 1: With tongue, form C2 |
| DIN 3016-1 D1 | Fastening clamps - Part 1: With tongue, form D1 |
| DIN 3016-1 D2 | Fastening clamps - Part 1: With tongue, form D2 |
| DIN 3016-1 E1 | Fastening clamps - Part 1: With tongue, form E1 |
| DIN 3016-1 E2 | Fastening clamps - Part 1: With tongue, form E2 |
| DIN 3016-1 F1 | Fastening clamps - Part 1: With tongue, form F1 |
| DIN 3016-1 F2 | Fastening clamps - Part 1: With tongue, form F2 |
| DIN 3016-1 G1 | Fastening clamps - Part 1: With tongue, form G1 |
| DIN 3016-1 G2 | Fastening clamps - Part 1: With tongue, form G2 |
| DIN 3016-1 H1 | Fastening clamps - Part 1: With tongue, form H1 |
| DIN 3016-1 H2 | Fastening clamps - Part 1: With tongue, form H2 |
| DIN 3016-1 I1 | Fastening clamps - Part 1: With tongue, form I1 |
| DIN 3016-1 I2 | Fastening clamps - Part 1: With tongue, form I2 |
| DIN 3016-1 J1 | Fastening clamps - Part 1: With tongue, form J1 |
| DIN 3016-1 J2 | Fastening clamps - Part 1: With tongue, form J2 |
| DIN 3016-2 G1 | Fastening clamps - Part 2: With fastening lugs, form G1 |
| DIN 3016-2 G2 | Fastening clamps - Part 2: With fastening lugs, form G2 |
| DIN 3016-2 H1 | Fastening clamps - Part 2: With fastening lugs, form H1 |
| DIN 3016-2 H2 | Fastening clamps - Part 2: With fastening lugs, form H2 |
| DIN 3016-3 J1 | Fastening clamps - Part 3: Section clamps and flange dimensions, form J1 |
| DIN 3016-3 J2 | Fastening clamps - Part 3: Section clamps and flange dimensions, form J2 |
| DIN 3016-3 J3 | Fastening clamps - Part 3: Section clamps and flange dimensions, form J3 |
| DIN 3016-3 K1 | Fastening clamps - Part 3: Section clamps and flange dimensions, form K1 |
| DIN 3016-3 K2 | Fastening clamps - Part 3: Section clamps and flange dimensions, form K2 |
| DIN 3016-3 K3 | Fastening clamps - Part 3: Section clamps and flange dimensions, form K3 |
| DIN 3016-3 M1 | Fastening clamps - Part 3: Section clamps and flange dimensions, form M1 |
| DIN 3016-3 M2 | Fastening clamps - Part 3: Section clamps and flange dimensions, form M2 |
| DIN 3017-1 A | Hose clamps with worm gear drive; form A |
| DIN 3017-1 B | Hose clamps with worm gear drive; form B |
| DIN 3017-2 B1 | Hose clamps - Part 2: Clamps with fastening lugs; form B1 |
| DIN 3017-2 B2 | Hose clamps - Part 2: Clamps with fastening lugs; form B2 |
| DIN 3017-3 C1 | Hose clamps - Part 3: Bolt clamps; form C1 |
| DIN 3017-3 C2 | Hose clamps - Part 3: Bolt clamps; form C2 |
| DIN 3017-5 D1 | Hose clamps - Part 5: Wide strip hose clamps with fastening lugs; form D1 |
| DIN 3017-5 D2 | Hose clamps - Part 5: Wide strip hose clamps with fastening lugs; form D2 |
| DIN 3017-5 E1 | Hose clamps - Part 5: Wide strip hose clamps with fastening lugs; form E1 |
| DIN 3017-5 E2 | Hose clamps - Part 5: Wide strip hose clamps with fastening lugs; form E2 |
| DIN 1592 | Heavy pipe clips with pipe-tightening, single-ended for rail vehicles |
| DIN 1593 | Heavy pipe clips with pipe-tightening, double-ended for rail vehicles |
| DIN 1596 | Light pipe clips with pipe-tightening, single-ended for rail vehicles |
| DIN 1597 | Light pipe clips with pipe-tightening, double-ended for rail vehicles |
| DIN 3021-1 A | Spring band clamps, form A |
| DIN 3021-1 B | Spring band clamps, form B |
| DIN 3021-3 A | Spring band clamps, spigot, form A |
| DIN 3021-3 B | Spring band clamps, spigot, form B |
| DIN 3021-3 C | Spring band clamps, spigot, form C |
| DIN 3021-3 D | Spring band clamps, spigot, form D |
| DIN 3567 A-1 | Pipe brackets for NW 20 to 500, form A |
| DIN 3567 A | Pipe brackets for NW 20 to 500, form A |
| DIN 3567 B-1 | Pipe brackets for NW 20 to 500, form B |
| DIN 3567 B | Pipe brackets for NW 20 to 500, form B |
| DIN 3567 C-1 | Pipe brackets for NW 20 to 500, form C |
| DIN 3567 C | Pipe brackets for NW 20 to 500, form C |
| DIN 5532 | Aluminium alloy pipe clips, single ended, with tightening for rail vehicles |
| DIN 5533 | Aluminium alloy pipe clips, double-ended, with tightening for rail vehicles |
| DIN 5534 | Aluminium alloy pipe clips, centrally fitted, for two pipes for rail vehicles |
| DIN 72571 | Pipe clamps - One-sided fastening |
| DIN 72572 | Pipe clamps - Center fastening for 2 pipes |
| DIN 72573 | Pipe clamps - Two-sided fastening |
| DIN 40008 C01 | Safety signs for electrotechnical engineering, form C01 |
| DIN 40008 C02 | Safety signs for electrotechnical engineering, form C02 |
| DIN 40008 C03 | Safety signs for electrotechnical engineering, form C03 |
| DIN 40008 C04 | Safety signs for electrotechnical engineering, form C04 |
| DIN 40008 H01 | Safety signs for electrotechnical engineering, form H01 |
| DIN 40008 H02 | Safety signs for electrotechnical engineering, form H02 |
| DIN 40008 H03 | Safety signs for electrotechnical engineering, form H03 |
| DIN 40008 H04 | Safety signs for electrotechnical engineering, form H04 |
| DIN 40008 M13 | Safety signs for electrotechnical engineering, form M13 |
| DIN 40008 M14 | Safety signs for electrotechnical engineering, form M14 |
| DIN 40008 P09 | Safety signs for electrotechnical engineering, form P09 |
| DIN 40008 P10 | Safety signs for electrotechnical engineering, form P10 |
| DIN 40008 P11 | Safety signs for electrotechnical engineering, form P11 |
| DIN 40008 P15 | Safety signs for electrotechnical engineering, form P15 |
| DIN 40008 P16 | Safety signs for electrotechnical engineering, form P16 |
| DIN 40008 P17 | Safety signs for electrotechnical engineering, form P17 |
| DIN 40008 P18 | Safety signs for electrotechnical engineering, form P18 |
| DIN 40008 P19 | Safety signs for electrotechnical engineering, form P19 |
| DIN 40008 P20 | Safety signs for electrotechnical engineering, form P20 |
| DIN 40008 S01 | Safety signs for electrotechnical engineering, form S01 |
| DIN 40008 S02 | Safety signs for electrotechnical engineering, form S02 |
| DIN 40008 W05 | Safety signs for electrotechnical engineering, form W05 |
| DIN 40008 W08 | Safety signs for electrotechnical engineering, form W08 |
| DIN 40008 W10 | Safety signs for electrotechnical engineering, form W10 |
| DIN 40008 W12 | Safety signs for electrotechnical engineering, form W12 |
| DIN 40008 W13 | Safety signs for electrotechnical engineering, form W13 |
| DIN 40008 W20 | Safety signs for electrotechnical engineering, form W20 |
| DIN 40008 W21 | Safety signs for electrotechnical engineering, form W21 |
| DIN 40008 W25 | Safety signs for electrotechnical engineering, form W25 |
| DIN 40008 W26 | Safety signs for electrotechnical engineering, form W26 |
| DIN 4844-2 D-P000 | Safety marking - Prohibited, form D-P000 |
| DIN 4844-2 D-P001 | Safety marking - No smoking, form D-P001 |
| DIN 4844-2 D-P002 | Safety marking - Fires, open flames and smoking prohibition, form D-P002 |
| DIN 4844-2 D-P003 | Safety marking - For pedestrians prohibited, form D-P003 |
| DIN 4844-2 D-P004 | Safety marking - Extinguished with water prohibited, form D-P004 |
| DIN 4844-2 D-P005 | Safety marking - No drinking water, form D-P005 |
| DIN 4844-2 D-P006 | Safety marking - No entry for unauthorized persons, form D-P006 |
| DIN 4844-2 D-P007 | Safety marking - For industrial vehicles prohibited, form D-P007 |
| DIN 4844-2 D-P008 | Safety marking - Do not touch, form D-P008 |
| DIN 4844-2 D-P009 | Safety marking - Do not touch, housing live, form D-P009 |
| DIN 4844-2 D-P010 | Safety marking - Turn prohibited, form D-P010 |
| DIN 4844-2 D-P011 | Safety marking - Prohibition for persons with pacemaker, form D-P011 |
| DIN 4844-2 D-P012 | Safety marking - Parking or storage of prohibited, form D-P012 |
| DIN 4844-2 D-P013 | Safety marking - Persons prohibited transportation, form D-P013 |
| DIN 4844-2 D-P014 | Safety marking - Animals are prohibited, form D-P014 |
| DIN 4844-2 D-P015 | Safety marking - Entering the prohibited area, form D-P015 |
| DIN 4844-2 D-P016 | Safety marking - Prohibited for people with metal implants, form D-P016 |
| DIN 4844-2 D-P017 | Safety marking - Spraying with water prohibited, form D-P017 |
| DIN 4844-2 D-P018 | Safety marking - Mobile prohibited, form D-P018 |
| DIN 4844-2 D-P019 | Safety marking - Food and drink prohibited, form D-P019 |
| DIN 4844-2 D-P020 | Safety marking - Carrying metal parts or watches prohibited, form D-P020 |
| DIN 4844-2 D-P021 | Safety marking - Carrying of magnetic or electronic media prohibited, form D-P021 |
| DIN 4844-2 D-P022 | Safety marking - Climb for unauthorized persons, form D-P022 |
| DIN 4844-2 D-P023 | Safety marking - Enter prohibited Behind the arm, form D-P023 |
| DIN 4844-2 D-P024 | Safety marking - Reach into a pile prohibited, form D-P024 |
| DIN 4844-2 D-P025 | Safety marking - Prohibited this device in the bathtub, shower or sink filled with water to use, form D-P025 |
| DIN 4844-2 D-P026 | Safety marking - Take into prohibited, form D-P026 |
| DIN 4844-2 D-P027 | Safety marking - Operation prohibited tie, form D-P027 |
| DIN 4844-2 D-P028 | Safety marking - Prohibited operation with necklace, form D-P028 |
| DIN 4844-2 D-P029 | Safety marking - Prohibited operation with long hair, form D-P029 |
| DIN 4844-2 D-P030 | Safety marking - Do not cover, form D-P030 |
| DIN 4844-2 D-P031 | Safety marking - Not for use in residential areas, form D-P031 |
| DIN 4844-2 D-P032 | Safety marking - Node prohibited, form D-P032 |
| DIN 4844-2 D-P033 | Safety marking - No needles prick, form D-P033 |
| DIN 4844-2 D-P034 | Safety marking - Do not fold or pushed together, form D-P034 |
| DIN 4844-2 D-P035 | Safety marking - Not permitted for hand-grinding and hand-held, form D-P035 |
| DIN 4844-2 D-P036 | Safety marking - Not permitted for side grinding, form D-P036 |
| DIN 4844-2 D-P037 | Safety marking - Not permitted for wet grinding, form D-P037 |
| DIN 4844-2 P016 | Safety marking - Not permitted for wet grinding, form P016 |
| DIN 4844-2 WSP001 | Safety marking - Running forbidden, form WSP001 |
| DIN 4844-2 WSP002 | Safety marking - Prohibited Swimming, form WSP002 |
| DIN 4844-2 WSP003 | Safety marking - Prohibited snorkeling, form WSP003 |
| DIN 4844-2 WSP004 | Safety marking - Prohibited scuba diving, form WSP004 |
| DIN 4844-2 WSP005 | Safety marking - Prohibited plunge, form WSP005 |
| DIN 4844-2 WSP006 | Safety marking - Sailing forbidden, form WSP006 |
| DIN 4844-2 WSP007 | Safety marking - Windsurfing prohibited, form WSP007 |
| DIN 4844-2 WSP008 | Safety marking - Muscle-powered boats, form WSP008 |
| DIN 4844-2 WSP009 | Safety marking - Machines powered boats, form WSP009 |
| DIN 4844-2 WSP010 | Safety marking - Banned jet skis, form WSP010 |
| DIN 4844-2 WSP011 | Safety marking - Forbidden water skiing activities, form WSP011 |
| DIN 4844-2 WSP013 | Safety marking - Wearing street shoes forbidden, form WSP013 |
| DIN 4844-2 WSP018 | Safety marking - Banned kite surfing, form WSP018 |
| DIN 4844-2 WSP019 | Safety marking - Parasailing prohibited, form WSP019 |
| DIN 4844-2 WSP020 | Safety marking - Prohibited beach sailing, form WSP020 |
| DIN 4844-2 D-W000 | Safety marking - Warning of a potential danger, form D-W000 |
| DIN 4844-2 D-W001 | Safety marking - Warning of flammable substances, form D-W001 |
| DIN 4844-2 D-W002 | Safety marking - Warning of explosive materials, form D-W002 |
| DIN 4844-2 D-W003 | Safety marking - Warning of toxic substances, form D-W003 |
| DIN 4844-2 D-W004 | Safety marking - Warning of corrosive substances, form D-W004 |
| DIN 4844-2 D-W005 | Safety marking - Warning of radioactive substances or ionizing radiation, form D-W005 |
| DIN 4844-2 D-W006 | Safety marking - Warning of suspended load, form D-W006 |
| DIN 4844-2 D-W007 | Safety marking - Warning of industrial materials handling vehicles, form D-W007 |
| DIN 4844-2 D-W008 | Safety marking - Warning of dangerous electrical voltage, form D-W008 |
| DIN 4844-2 D-W009 | Safety marking - Warning against optical radiation, form D-W009 |
| DIN 4844-2 D-W010 | Safety marking - Warning of laser beam, form D-W010 |
| DIN 4844-2 D-W011 | Safety marking - Warning of brand promotional materials, form D-W011 |
| DIN 4844-2 D-W012 | Safety marking - Warning of non-ionizing, electromagnetic radiation, form D-W012 |
| DIN 4844-2 D-W013 | Safety marking - Warning of a magnetic field, form D-W013 |
| DIN 4844-2 D-W014 | Safety marking - Warning of the danger of stumbling, form D-W014 |
| DIN 4844-2 D-W015 | Safety marking - Warning of danger of falling, form D-W015 |
| DIN 4844-2 D-W016 | Safety marking - Warning bio hazard, form D-W016 |
| DIN 4844-2 D-W017 | Safety marking - Warning against cold, form D-W017 |
| DIN 4844-2 D-W018 | Safety marking - Warning of harmful or irritating substances, form D-W018 |
| DIN 4844-2 D-W019 | Safety marking - Warning of gas cylinders, form D-W019 |
| DIN 4844-2 D-W020 | Safety marking - Warning against the dangers of batteries, form D-W020 |
| DIN 4844-2 D-W021 | Safety marking - Warning of explosive atmosphere, form D-W021 |
| DIN 4844-2 D-W022 | Safety marking - Warning of routing shaft, form D-W022 |
| DIN 4844-2 D-W023 | Safety marking - Warning of danger of crushing, form D-W023 |
| DIN 4844-2 D-W024 | Safety marking - Warning against tipping during rolling, form D-W024 |
| DIN 4844-2 D-W025 | Safety marking - Beware of automatic start, form D-W025 |
| DIN 4844-2 D-W026 | Safety marking - Beware of hot surfaces, form D-W026 |
| DIN 4844-2 D-W027 | Safety marking - Warning of hand injuries, form D-W027 |
| DIN 4844-2 D-W028 | Safety marking - Warning of danger of slipping, form D-W028 |
| DIN 4844-2 D-W029 | Safety marking - Warning of dangers of a conveyor system in the track, form D-W029 |
| DIN 4844-2 D-W030 | Safety marking - Warning of danger feeding, form D-W030 |
| DIN 4844-2 D-W031 | Safety marking - Warning introduce Eng, form D-W031 |
| DIN 4844-2 WSW001 | Safety signs, warning of thin ice, form WSW001 |
| DIN 4844-2 WSW002 | Safety signs, warning of slipway, form WSW002 |
| DIN 4844-2 WSW003 | Safety signs, warning of water-skiing area, shape WSW003 |
| DIN 4844-2 WSW005 | Safety signs, warning of deep water, form WSW005 |
| DIN 4844-2 WSW006 | Safety signs, warning of shallow water (diving), form WSW006 |
| DIN 4844-2 WSW008 | Safety signs, warning of sudden depth change in swimming or recreation pool, form WSW008 |
| DIN 4844-2 WSW010 | Safety signs, warning of an unstable cliff edge, shape WSW010 |
| DIN 4844-2 WSW011 | Safety signs, warning of falling rocks from unstable cliff, form WSW011 |
| DIN 4844-2 WSW013 | Safety signs, warning of wastewater discharge, shape WSW013 |
| DIN 4844-2 WSW015 | Safety signs, warning of strong currents, form WSW015 |
| DIN 4844-2 WSW016 | Safety signs, warning of vessel traffic, form WSW016 |
| DIN 4844-2 WSW017 | Safety signs, warning of beach sailing, form WSW017 |
| DIN 4844-2 WSW020 | Safety signs, warning of kitesurfing, form WSW020 |
| DIN 4844-2 WSW021 | Safety signs, warning of parasailing, form WSW021 |
| DIN 4844-2 WSW023 | Safety signs, warning of high surf or heavy breaking seas, shape WSW023 |
| DIN 4844-2 WSW024 | Safety signs, warning of steep sloping beach, form WSW024 |
| DIN 4844-2 D-M000 | Safety marking - General mandatory signs, form D-M000 |
| DIN 4844-2 D-M001 | Safety marking - Use eye protection, form D-M001 |
| DIN 4844-2 D-M002 | Safety marking - Use head protection, form D-M002 |
| DIN 4844-2 D-M003 | Safety marking - Use of hearing protection, form D-M003 |
| DIN 4844-2 D-M004 | Safety marking - Use respiratory protection, form D-M004 |
| DIN 4844-2 D-M005 | Safety marking - Use foot protection, form D-M005 |
| DIN 4844-2 D-M006 | Safety marking - Use hand protection, form D-M006 |
| DIN 4844-2 D-M007 | Safety marking - Use protective clothing, form D-M007 |
| DIN 4844-2 D-M008 | Safety marking - Use face protection, form D-M008 |
| DIN 4844-2 D-M009 | Safety marking - Creating a collection belt, form D-M009 |
| DIN 4844-2 D-M010 | Safety marking - For pedestrians, form D-M010 |
| DIN 4844-2 D-M011 | Safety marking - Safety belt use, form D-M011 |
| DIN 4844-2 D-M012 | Safety marking - Transitional use, form D-M012 |
| DIN 4844-2 D-M013 | Safety marking - Before opening power plug, form D-M013 |
| DIN 4844-2 D-M014 | Safety marking - Disconnect power before working freely, form D-M014 |
| DIN 4844-2 D-M015 | Safety marking - Creating a rescue vest, form D-M015 |
| DIN 4844-2 D-M016 | Safety marking - Cutting plant oils, form D-M016 |
| DIN 4844-2 D-M017 | Safety marking - Honk, form D-M017 |
| DIN 4844-2 D-M018 | Safety marking - Instructions for use, form D-M018 |
| DIN 4844-2 D-M019 | Safety marking - Lock, form D-M019 |
| DIN 4844-2 D-M020 | Safety marking - Eye shielding for patients are, form D-M020 |
| DIN 4844-2 M028 | Safety marking, barriers, form M028 |
| DIN 4844-2 M029 | Safety marking, horns, form M029 |
| DIN 4844-2 WSM001 | Safety marking, using lifejacket, form WSM001 |
| DIN 4844-2 WSM002 | Safety marking, supervise children in water, form WSM002 |
| DIN 4844-2 D-E001 | Safety marking - Direction indication for first-aid equipment, escape routes and emergency exits, form D-E001 |
| DIN 4844-2 D-E002 | Safety marking - Direction indication for first-aid equipment, escape routes and emergency exits, form D-E002 |
| DIN 4844-2 D-E003 | Safety marking - First aid, form D-E003 |
| DIN 4844-2 D-E004 | Safety marking - Patient wearing, form D-E004 |
| DIN 4844-2 D-E005 | Safety marking - Emergency shower, form D-E005 |
| DIN 4844-2 D-E006 | Safety marking - Eye rinsing device, form D-E006 |
| DIN 4844-2 D-E007 | Safety marking - Emergency telephone, form D-E007 |
| DIN 4844-2 D-E008 | Safety marking - Doctor, form D-E008 |
| DIN 4844-2 D-E009 | Safety marking - Rescue off / emergency exit, form D-E009 |
| DIN 4844-2 D-E010 | Safety marking - Rescue off / emergency exit, form D-E010 |
| DIN 4844-2 D-E011 | Safety marking - Collection point, form D-E011 |
| DIN 4844-2 D-E019 | Safety signs, emergency exit, form D-E019 |
| DIN 4844-2 WSE001 | Safety signs, Public Rescue Equipment, form WSE001 |
| DIN 4844-2 D-F001 | Safety marking - Direction indication, form D-F001 |
| DIN 4844-2 D-F002 | Safety marking - Direction indication, form D-F002 |
| DIN 4844-2 D-F003 | Safety marking - Wandhydrant, Lösch schlauch, form D-F003 |
| DIN 4844-2 D-F004 | Safety marking - Ladder, form D-F004 |
| DIN 4844-2 D-F005 | Safety marking - Fire extinguisher, form D-F005 |
| DIN 4844-2 D-F006 | Safety marking - Fire alarm telephone, form D-F006 |
| DIN 4844-2 D-F007 | Safety marking - Resources and equipment for fire fighting, form D-F007 |
| DIN 4844-2 D-F008 | Safety marking - Fire detectors, form D-F008 |
| DIN 4844-2 D-S001 | Safety marking - Supplementary signs, form D-S001 |
| DIN 4844-2 D-S002 | Safety marking - Supplementary signs, form D-S002 |
| DIN 4844-2 D-H001 | Safety marking - Information signs, form D-H001 |
| DIN 4844-2 D-H002 | Safety marking - Information signs, form D-H002 |
| DIN 4844-2 D-H003 | Safety marking - Information signs, form D-H003 |
| DIN 4844-2 D-H004 | Safety marking - Information signs, form D-H004 |
| DIN 4844-2 D-H005 | Safety marking - Information signs, form D-H005 |
| DIN 4844-2 D-C001 | Safety marking - Combination signs, form D-C001 |
| DIN 4844-2 D-C002 | Safety marking - Combination signs, form D-C002 |
| DIN 4844-2 D-C003 | Safety marking - Combination signs, form D-C003 |
| DIN 4844-2 D-C004 | Safety marking - Combination signs, form D-C004 |
| DIN 825 A | Signs, form A |
| DIN 825 AL | Signs, form AL |
| DIN 825 AP | Signs, form AP |
| DIN 825 B | Signs, form B |
| DIN 825 C | Signs, form C |
| DIN 825 D | Signs, form D |
| DIN 825 E | Signs, form E |
| DIN 14301-1 DS | Aluminium alloy delivery and suction coupling type D, nominal pressure 16 |
| DIN 14301-2 DS | Aluminium alloy delivery and suction coupling type D, nominal pressure 16 |
| DIN 14301-3 DS | Aluminium alloy delivery and suction coupling type D, nominal pressure 16 |
| DIN 14301-4 DS | Aluminium alloy delivery and suction coupling type D, nominal pressure 16 |
| DIN 14301 | Aluminium alloy delivery and suction coupling type D, nominal pressure 16 |
| DIN 14306-1 DS | Aluminium alloy solid coupling type D for pressure and suction purposes, nominal pressure 16 |
| DIN 14306-3 DS | Aluminium alloy solid coupling type D for pressure and suction purposes, nominal pressure 16 |
| DIN 14306 D | Aluminium alloy solid coupling type D for pressure and suction purposes, nominal pressure 16 |
| DIN 14307-2 1-S | Cam part |
| DIN 14307-2 3 | Flat sealing ring |
| DIN 14321 4-S | Gasket |
| DIN 14307-2 | Solid coupling type C |
| DIN 14311 | Cap |
| DIN 14334 | Solid couplings Storz System PN 16 for delivery and suction |
| DIN 14334 1 | Solid couplings Storz System PN 16 for delivery and suction, latch part (Item No. 1) |
| DIN 14334 2 | Fixed coupling system Storz PN 16 for pressure and suction operation, sealing ring Storz, pressure (item no.2) |
| DIN 14334 2 | Fixed coupling system Storz PN 16 for pressure and suction operation, sealing ring Storz, suction (item no.2) |
| DIN 14334 3 | Fixed coupling system Storz PN 16 for pressure and suction operation, flat sealing ring (item no.3) |
| DIN 14310-2 DS | Aluminium alloy cap fire hose coupling type D for pressure and suction purposes, nominal pressure 16 |
| DIN 14310 | Aluminium alloy cap fire hose coupling type D for pressure and suction purposes, nominal pressure 16 |
| DIN 14321-2 S | Aluminium alloy suction coupling type C, nominal pressure 16 |
| DIN 14331-4 S | Aluminium alloy suction coupling type C, nominal pressure 16 |
| DIN 20018-1 | Textile-reinforced hoses - Part 1: Maximal working pressure PN 10/16 |
| DIN 3285 | Nipples and unions nominal pressure 10 - Hose nipples |
| DIN 3289 | Nipples and unions nominal pressure 10 - Threaded tapered union nipples |
| DIN 3489 B | Sealing coupling B |
| DIN 3489 B1 | Hose coupling B1 |
| DIN 3489 BA | Outside thread coupling BA |
| DIN 3489 BI | Inside thread coupling BI |
| DIN 3489 D | Gasket |
| DIN 3489 DB1 | Outside thread coupling DB1 |
| DIN 3489 DB2 | Inside thread coupling DB2 |
| DIN 3489 DB3 | Hose coupling DB3 |
| DIN 3489 VB1 | Hose coupling with gasket VB1 |
| DIN 3489 VB | Sealing coupling with gasket VB |
| DIN 3489 VBA | Outside thread coupling with joint washer VBA |
| DIN 3489 VBI | Inside thread coupling with gasket VBI |
| DIN 3489 VDB1 | Outside thread coupling with joint washer VDB1 |
| DIN 3489 VDB2 | Inside thread coupling with gasket VDB2 |
| DIN 3489 VDB3 | Hose coupling with gasket VDB3 |
| DIN 40621 | Insulating sleeves B (without textile) |
| DIN 40628-1 | Insulating sleeves from silicone rubber |
| DIN 74225 | Brake hose clips |
| DIN 74304 A | Compression couplings, form A |
| DIN 74304 B | Compression couplings, form B |
| DIN 74304 C | Compression couplings, form C |
| DIN 32620 A | Clamps, form A |
| DIN 32620 A | Clamps, form A |
| DIN 32620 B | Clamps, form B |
| DIN 32620 B | Clamps, form B |
| DIN 32620 | Bands |
| DIN 7463 A1 | Sash fasteners with level contact surface, form A1 |
| DIN 7463 A2 | Sash fasteners with collar as contact surface, form A2 |
| DIN 7463 B | Catches with plugs, form B |
| DIN 7463 C | Catches angular with fastening holes to the screws or nuts, form C |
| DIN 7463 D | Catches angular without fastening holes to the weldings, form D |
| DIN 7463 E | River washers, form E |
| DIN 7463 F | Central pins without collar, form F |
| DIN 7463 G | Central pins with collar, form G |
| DIN 7465 A | Padlocks without connection eye, form A |
| DIN 7465 B | Padlocks without connection eye, form B |
| DIN 7465 C | Padlocks without connection eye, chain, arrester, form C |
| DIN 7465 D | Padlocks without connection eye, chain, split ring, form D |
| DIN 18251 ES | Locks - Mortise locks and multipoint locks, lock case |
| DIN 81410 A | Pin bolts - Coarse type made of steel, form A |
| DIN 81410 A/B | Pin bolts - Coarse type made of steel, bolt set, form A/B |
| DIN 81410 B | Pin bolts - Coarse type made of steel, locking clamp, form B |
| DIN 81410 C | Pin bolts - Coarse type made of steel, pin bolt with locking position, form C |
| DIN 81410 D | Pin bolts - Coarse type made of steel, plate, form D |
| DIN 83104 1 | Latch |
| DIN 83104 2 | Axis with pusher |
| DIN 83104 3 | Axis with square pin |
| DIN 83104 4 | Axis with a flat head |
| DIN 83104 5 | Sleeves |
| DIN 83104 A | Dogs for heavy hinged doors on ships and for hatches, form A |
| DIN 83104 B | Dogs for heavy hinged doors on ships and for hatches, form B |
| DIN 83104 C | Dogs for heavy hinged doors on ships and for hatches, form C |
| DIN 7527-1 E | Steel forgings, washers, forging quality E |
| DIN 7527-1 F | Steel forgings, washers, forging quality F |
| DIN 7527-2 E | Steel forgings, washers with hole, forging quality E |
| DIN 7527-2 F | Steel forgings, washers with hole, forging quality F |
| DIN 7527-3 E | Steel forgings, seamless rings, forging quality E |
| DIN 7527-3 F | Steel forgings, seamless rings, forging quality F |
| DIN 7527-5 G | Steel forgings, roles and welded rings |
| DIN 71412 A | Lubricating nipples; cone type, form A |
| DIN 16284 | Nipple connections for pressure gauges and their accessories |
| DIN 16284 | Swivel nuts |
| DIN 16284 | Nipples |
| DIN 3402 A | Lubricating nipples, form A |
| DIN 3402 B | Lubricating nipples, form B |
| DIN 3402 C | Lubricating nipples, form C |
| DIN 3402 D | Lubricating nipples, form D |
| DIN 3404 A | Lubricating nipples, form A |
| DIN 3405 A | Lubricating nipples cupped type, form A |
| DIN 3405 B | Lubricating nipples cupped type, form B |
| DIN 3405 C | Lubricating nipples cupped type, form C |
| DIN 3405 D | Lubricating nipples cupped type, form D |
| DIN 71412 B | Lubricating nipples; cone type, form B |
| DIN 71412 C | Lubricating nipples; cone type, form C |
| DIN 15058 | Axle holder |
| DIN 15155 N | Box pallets, form N |
| DIN 15155 Y | Mesh box pallets - Exchange pallets, form Y |
| DIN 24531-1 P | Gratings used as stairs - Part 1: Metal gratings, form P |
| DIN 24531-1 SP | Gratings used as stairs - Part 1: Metal gratings, form SP |
| DIN 24531-2 | Gratings used as stairtreads - Part 2: Sheet metal gratings |
| DIN 24537-1 P | Gratings used as floor coverings - Part 1: Metal gratings, form P |
| DIN 24537-1 SP | Gratings used as floor coverings - Part 1: Metal gratings, form SP |
| DIN 3401 Lubricators | Drip-feed lubricators and cups |
| DIN 3401 drip-feed lubricator | Drip-feed lubricators and cups |
| DIN 5902 | Fishplates for grooveless flat bottom rails |
| DIN 6311 S | Thrust pads, form S |
| DIN 799-1 A | Foundation blocks, form A |
| DIN 799-1 B | Foundation blocks, form B |
| DIN 12871 | Laboratory apparatus in rubber and plastics; Elastomer stoppers |
| DIN 7355 | Jacks |
| DIN 33416 | 3D Person |
| DIN 15207-1 A1 | Idlers for belt conveyors, form A1 |
| DIN 15207-1 A2 | Idlers for belt conveyors, form A2 |
| DIN 15207-1 B2 | Idlers for belt conveyors, form B2 |
| DIN 15207-1 C2 | Idlers for belt conveyors, form C2 |
| DIN 15207-1 G1 | Idlers for belt conveyors, form G1 |
| DIN 15207-1 G2 | Idlers for belt conveyors, form G2 |
| DIN 442 | Sealing expanding caps |
| DIN 443 A | Sealing push-in caps, form A |
| DIN 443 B | Sealing push-in caps, form B |
| DIN 50125 A | Tensile test pieces, form A |
| DIN 50125 B | Tensile test pieces, form B |
| DIN 50125 C | Tensile test pieces, form C |
| DIN 50125 D | Tensile test pieces, form D |
| DIN 50125 E | Tensile test pieces, form E |
| DIN 50125 F | Tensile test pieces, form F |
| DIN 50125 G | Tensile test pieces, form G |
| DIN 50125 H | Tensile test pieces, form H |
Status: 09/2023